In a forge on Vancouver Island, reclaimed steel is turned into handcrafted tanto. Directed, Photographed, and Edited by Trevor Komori Location Sound: Sean Brouwer B Camera Operator: Liam Leyland Music Composed by Kurtis So Production Assistants: Vivian Hu & Judy Zheng still images: https://islandblacksmith.ca/2018/08/short-film-release-%E6%B8%A9%E6%95%85%E7%9F%A5%E6%96%B0/ behind the scenes: https://islandblacksmith.ca/2017/08/komorisan-back-in-the-forge/ forging the sunnobi tanto: https://islandblacksmith.ca/2018/03/utsushi-study-of-a-sunnobi-tanto/ making the tanto mounting: https://islandblacksmith.ca/2017/08/on-ko-chi-shin-tanto/

Reclaimed antique steel is forged into a kotanto as part of the Satoyama Project. http://islandblacksmith.ca​ Directed, Photographed, and Edited by Jordan Wende: https://www.instagram.com/jordanwende/ Photo essay: http://islandblacksmith.ca/2020/07/photo-essay-forging-a-knife/ Finished kotanto: http://islandblacksmith.ca/2021/02/forest-kotanto-with-antique-fittings/ Knife in the intro: http://islandblacksmith.ca/2020/07/kominka-forest-kotanto/

Serious students of the forge can watch the full process version here: https://youtu.be/oH5B7n7NtbE One of the most technical challenges of this project was creating the ireko saya (入れ子鞘, nesting scabbard) lining within the tight constraints offered by the original block of wood. A refined detail that is normally hidden from view, the ireko saya protects the blade from the hardwood. A focal point for the koshirae is the unique antler crown kurikata which is reminiscent of a mushroom contrasting against the dark wood of a tree. Furusato (故郷, pronounced “foo-roo-sah-toe”) means home place or hometown and contains the ideas of being rooted or grounded wherever one may sojourn, and a confidence and longing for return. This tanto has a simple and elegant form with a natural and humble mounting that reflects the rustic satoyama lifestyle and suits the aesthetics of the way of tea. The wood was a discarded scrap that was just barely large enough for this project and comes from the Congo/Zaire. The block of wood sat for several years waiting for the right blade to make the best and most use of it. This precious dark chocolate coloured hardwood is locally called Tshikalakala or Dikela, meaning turn around or circle back. Materials for the wabisabi aikuchi style koshirae mounting include Tshikalakala (Wenge) wood for the kataki tsuka and saya, Hounoki (Japanese Magnolia) wood and cow horn for the ireko saya, copper bus bar for the habaki, buffalo horn for the mekugi, and pieces of shed antler for the kurikata and tsunakuchi. The tsuka and saya are finished in a thin layer of kijiro fukiurushi (wiped lacquer) made from natural source urushi lacquer. "When difficulties come, I remember my home place…Someday I shall fulfill my task. And, then, return to my home place. To the green mountains and clear rivers of my home." -- Furusato, Takano Tatsuyuki More about this project: http://islandblacksmith.ca/2019/08/furusato-tanto/

A look at the inside operation of a prototype fuigo (鞴) box bellows...two intake valves, two manifold valves, one piston, one output, double action...more about fuigo here: http://islandblacksmith.ca/2015/06/why-you-need-a-swordsmiths-fuigo-box-bellows/ valves: http://islandblacksmith.ca/2015/11/making-valves-for-fuigo-box-bellows/ fuigo archive: http://islandblacksmith.ca/tag/fuigo/

**WARNING: This is the longer process version intended for serious students of knifemaking. The sunobe stage is at 4x speed as the hammering was fairly inaccurate due to a blister on my palm from the seam of the yellow gloves...starting material was a harrow tooth, finished blade is hirazukuri, iori mune, 140mm / 5.5" nagasa, 6.5mm motokasane...more info below... 0:20 1. the harrow tooth is first forged into a sunobe, a blade preform, that has a rectangular cross section with the proper thickness and distal tapers for the spine and tang as well as a small notch where the mune machi will be...(dead battery zone) 2. then the iori mune, the peaked spine, is forged... 3:00 3. then the bevels are forged in, working from the machi towards the tip and then back down again, followed by the forging of the tang in this case...during the beveling stage the spine tends to curve upwards so a stump between the anvil and forge is used to make downwards adjustments in advance from time to time, the wood will not mar the peak of the spine...also during this stage water on the anvil keeps the scale from building up and being forged into the surface of the steel... 7:19 4. the nakago (tang) is also shaped and beveled using the same techniques as the blade... 9:11 5. some final planishing, adjustments, and straightening along with a hot stamp "signature" on the tang bring the hizukuri stage to a close...the finish will be tsuchime (hammer texture) so there was no filing/polishing before yaki-ire... 10:16 6. yaki-ire (quenching/hardening) was done at my own forge for the dim and consistent light conditions, allowing the colour to be seen more accurately... 11:10 7. yaki-modoshi (tempering) is a slight reheating to remove some of the stress and increase toughness after hardening... http://islandblacksmith.ca/process/

Read more about this project here: http://islandblacksmith.ca/2017/01/building-traditional-swordsmith-forge/ Serious students of the forge can watch the full process and see more traditional Japanese swordsmith style forge construction here: https://www.youtube.com/watch?v=Hi9Sh2Dt65U&list=PLBJ5AOs7cMwCSinW7foaiHFZKbZDkasQL&index=1 Most of history was forged with very simple equipment made from found and natural materials. A basic charcoal forge can be made with clay, brick, or even mud and stone. Traditional Japanese swordsmithing forges are purpose-built with certain design elements specific to the tasks involved in tanren and hizukuri. This is a short overview of a 7 part series to illustrate several of the features that are common to this type of construction and follow the process of crafting a functioning swordsmith’s forge at a museum on Vancouver Island.

(has subtitles in english) Thanks very much to the guys who came all the way to the workshop to film for TV Tokyo. Here is most of my segment which includes footage from the visit as well as some of our own footage shot of charcoal making. Editing 5 hours of footage down to a few minutes is no easy task but they did a great job of telling the story of the workshop and the basic forging process. Though it was an entertaining point that I had gleaned some of my specialized information by watching Japanese swordsmiths at work on Youtube, I would like to include some additional credits from the interview that did not make the final cut...Emmanuel Schrock for my blacksmithing foundation at age 14, Pierre Nadeau for clarifying and explaining techniques I had seen in practice, Yoshihara~san for his excellent books printed in english, and Louie Mills for inspiration and advice. Read more about the visit here: http://islandblacksmith.ca/2015/07/japanese-media-visit-the-forge/

breaking in the new camera: this is a brief demo of the process of preparing the finished charcoal for the forge...the larger chunks are split or chopped up and screened to remove the dust...for swordsmithing there are more specific divisions into four sizes from dust to larger pieces for different phases of forging and preparation...most of my work is with 1-2 inch pieces and we generally process the amount of charcoal in that bucket or more in a single batch...the charcoal is softwood, pine is the standard but for general forge work cedar and fir are also acceptable...shot in japan where you can buy pine charcoal, in canada we have to make our own.

grandpa has a half dozen variations of these ancient tools and keeps going back to them despite having newer ones on the shelf...the old ones are hand forged and very thick and sturdy, with an integral rope-wrapped handle and lots of heft...the style can vary from a slightly curved bamboo hatchet shape to a sickle style with deep brush tip...i started with a fairly coarse synthetic stone and then went to a fine natural Japanese finishing stone...shot near Sasayama. this tool makes a great charcoal chopper if you are using properly cooked softwood that still has lots of strength left in it!

A glimpse of daily life at 100 years of age in a small rural village in Japan. Growing chestnut trees, daikon radish, and sweet potatoes as winter turns to spring in the shadow of a mountain forest. 2024, 1080p