A river runs through it!
RyanzRocks
Based on the image, the rock appears to have a layered structure with a mix of colors, predominantly gray with some yellowish-brown areas. This suggests it could be a type of banded iron formation or possibly a metamorphic rock like slate or schist. Banded iron formations are known for their alternating layers of iron oxides and silica or chert, while slate and schist are metamorphic rocks that can show similar banding due to the alignment of minerals under pressure and heat.
Brecciated Jasper Cut!
RyanzRocks
Brecciated Jasper is a type of jasper that is characterized by its appearance as broken fragments or pieces of jasper that have been naturally cemented together. Here's a more detailed explanation:
Formation: Brecciated Jasper forms when existing jasper is fractured or broken into pieces due to geological processes like tectonic activity or weathering. These fragments are then cemented together by silica or other minerals, often quartz, which fills the spaces between the fragments.
Appearance: It typically has a distinctive, mosaic-like pattern where the jasper fragments are angular and vary in size, creating a visually striking contrast with the matrix that holds them together. The colors can range from red, brown, yellow, to white, depending on the impurities present in the jasper and the matrix material.
Uses: Due to its unique and attractive pattern, Brecciated Jasper is commonly used in jewelry, carvings, and decorative items. It's valued for its aesthetic appeal and the interesting geological story it
Thunderegg Cut!
RyanzRocks
A Thunderegg is a geological structure similar to a geode but with unique characteristics. Here's an overview:
Formation: Thundereggs form within rhyolitic volcanic ash layers. They start as gas bubbles or steam pockets in the lava, which act as molds. Over time, these are filled with silica-rich fluids, mainly chalcedony, agate, jasper, or opal, creating intricate patterns and colors inside.
Appearance: On the outside, thundereggs look like ordinary, rough-textured rocks, often with a white-gray to reddish-brown surface. However, when cut and polished, they reveal a variety of internal structures, from solid agate or chalcedony cores to sometimes hollow centers with crystals.
Size: They can range from small, about the size of a baseball, to larger specimens over a meter across, though most commonly they are between two to six inches in diameter.
Locations: While Oregon, USA, is particularly famous for thundereggs, especially in counties like Crook, Jefferson, Malheur, Wasco, and Wheeler, they are found globally wherever the geological conditions are right. Other notable locations include Germany, Australia, Brazil, Canada, Mexico, Poland, Romania, and Turkey.
Cultural Significance: In Oregon, the thunderegg was designated as the state rock in 1965, reflecting its importance in local geology and culture. Native American legends attribute their formation to thunder spirits or gods throwing these rocks during thunderstorms.
Collection and Use: Thundereggs are popular among rock collectors for their unique beauty once cut open. They're often used in jewelry making or as display pieces due to their aesthetic appeal after being sliced and polished.
Variations: Each thunderegg is unique due to the minerals present in the area where it forms, leading to a wide variety in color, pattern, and structure even from the same bed.
1
comment
Brecciated Jasper Cut!
RyanzRocks
Brecciated Jasper is a type of jasper that is characterized by its appearance as broken fragments or pieces of jasper that have been naturally cemented together. Here's a more detailed explanation:
Formation: Brecciated Jasper forms when existing jasper is fractured or broken into pieces due to geological processes like tectonic activity or weathering. These fragments are then cemented together by silica or other minerals, often quartz, which fills the spaces between the fragments.
Appearance: It typically has a distinctive, mosaic-like pattern where the jasper fragments are angular and vary in size, creating a visually striking contrast with the matrix that holds them together. The colors can range from red, brown, yellow, to white, depending on the impurities present in the jasper and the matrix material.
Uses: Due to its unique and attractive pattern, Brecciated Jasper is commonly used in jewelry, carvings, and decorative items. It's valued for its aesthetic appeal and the interesting geological story it
Agate Cut!
RyanzRocks
Agate is a microcrystalline variety of quartz, specifically a form of chalcedony, known for its fine grain and bright color patterns. Here are some key points about agate:
Formation: Agate forms in volcanic and sedimentary rocks. It often begins as a cavity in the rock, which then gets filled with layers of silica-rich water. Over time, this solution deposits minerals in layers, creating the characteristic banding of agate. This process can take millions of years.
Appearance: Agate is famous for its beautiful, often banded patterns of color, which can range from translucent to opaque. Colors include white, blue, red, black, yellow, and brown among others, with the patterns formed by the successive layers of chalcedony being deposited. Sometimes, agates can be found with inclusions like moss (moss agate) or even fossils.
Types of Agate:
Banded Agate: Shows clear, concentric bands of color.
Moss Agate: Contains mineral inclusions that look like moss or foliage.
Dendritic Agate: Similar to moss agate but with t
Fossiliferous Limestone Cut!
RyanzRocks
Based on the image, the rock appears to have a porous texture with numerous rounded cavities, which is characteristic of certain types of sedimentary rocks. One possibility is that this could be a type of limestone known as "fossiliferous limestone," which contains visible fossils or fossil fragments. The cavities might be where fossils or other inclusions were once present.
Breccia!
RyanzRocks
Breccia is a clastic sedimentary rock characterized by its composition of angular fragments or clasts that are cemented together. Here are some key details about breccia:
Formation: Breccia forms in environments where there is little to no transportation of the rock fragments after they are broken off from their source. This can occur in several settings:
Talus Slopes: At the base of cliffs where rockfalls occur, and the fragments accumulate with minimal movement.
Fault Zones: Where tectonic forces break rocks, and the fragments are cemented in place.
Volcanic Eruptions: Around volcanic vents where explosive eruptions eject angular volcanic material.
Submarine Landslides: In underwater environments where landslides deposit broken rock.
Composition:
Clasts: These are the angular fragments, which can be composed of various rock types like limestone, quartzite, or volcanic rocks.
Matrix: The finer material, often sand, silt, or clay, that fills the spaces between the clasts.
Cement: Minerals like calcite, sili
Agate Cut!
RyanzRocks
Based on the appearance of the rock in the image, it looks like it could be a type of chalcedony, specifically an agate. Agates are known for their banded or layered appearance, often with translucent to semi-translucent qualities. The rock in the image shows a mix of colors and a somewhat banded structure, which is characteristic of agates. They commonly form in volcanic and sedimentary rocks and are often found in cavities or veins.
Beautiful Agate Cut!
RyanzRocks
Agate is a microcrystalline variety of quartz, specifically a form of chalcedony, known for its fine grain and bright color patterns. Here are some key points about agate:
Formation: Agate forms in volcanic and sedimentary rocks. It often begins as a cavity in the rock, which then gets filled with layers of silica-rich water. Over time, this solution deposits minerals in layers, creating the characteristic banding of agate. This process can take millions of years.
Appearance: Agate is famous for its beautiful, often banded patterns of color, which can range from translucent to opaque. Colors include white, blue, red, black, yellow, and brown among others, with the patterns formed by the successive layers of chalcedony being deposited. Sometimes, agates can be found with inclusions like moss (moss agate) or even fossils.
Types of Agate:
Banded Agate: Shows clear, concentric bands of color.
Moss Agate: Contains mineral inclusions that look like moss or foliage.
Dendritic Agate: Similar to moss agate but with t
Ooids inside!
RyanzRocks
Based on the appearance of the rock in the image, it looks like it could be a type of limestone known as oolitic limestone. Oolitic limestone is characterized by its small, spherical or oval grains called ooids, which are visible in the rock's texture. These ooids are typically formed in shallow marine environments and are composed of concentric layers of calcium carbonate.
The rock in the image shows a pattern of small, rounded structures embedded in a matrix, which is typical of oolitic limestone.
Travertine Cut!
RyanzRocks
Travertine is indeed a type of limestone formed by mineral spring deposits, particularly from hot springs, which often results in a fibrous or banded appearance due to the deposition of calcium carbonate.
Agate Stone Cut!
RyanzRocks
Agate is a type of rock consisting primarily of chalcedony, which is a form of microcrystalline quartz. Here are some key points about agate:
Formation: Agates form in volcanic rocks, filling cavities in basalts or other similar rocks. Over millions of years, silica from groundwater seeps into these cavities, depositing layer upon layer to create the characteristic banded patterns.
Appearance: They are known for their beautiful, intricate patterns and colors. Agates can range from translucent to opaque and can feature bands, plumes, moss-like inclusions, or even landscapes within them due to various impurities or the way the silica was deposited.
Types:
Banded Agate: Shows concentric or parallel bands.
Moss Agate: Contains moss-like inclusions of manganese or iron.
Lace Agate: Features delicate, lace-like patterns.
Fire Agate: Contains iridescent layers due to the presence of iron oxide.
Uses:
Jewelry: Due to their beauty and durability, agates are widely used in jewelry making for beads, cabochons, and carvings.
Decorative: Used as ornamental stones in home decor or as tumbled stones.
Metaphysical: Some believe agates have healing properties or can provide grounding energy.
Locations: Agates can be found all over the world, with notable locations including Brazil, Uruguay, Mexico, the United States (particularly in states like Oregon, Idaho, and Montana), and Germany.
Care: Agate is relatively hard (Mohs hardness of about 7), making it suitable for daily wear, but it should still be protected from sharp blows or extreme temperature changes which might cause fractures.
If you're interested in agates, collecting them can involve a bit of rockhounding, where enthusiasts search natural environments for these gems.
Brecciated Jasper Cut!
RyanzRocks
Brecciated Jasper is a type of jasper that is characterized by its appearance as broken fragments or pieces of jasper that have been naturally cemented together. Here's a more detailed explanation:
Formation: Brecciated Jasper forms when existing jasper is fractured or broken into pieces due to geological processes like tectonic activity or weathering. These fragments are then cemented together by silica or other minerals, often quartz, which fills the spaces between the fragments.
Appearance: It typically has a distinctive, mosaic-like pattern where the jasper fragments are angular and vary in size, creating a visually striking contrast with the matrix that holds them together. The colors can range from red, brown, yellow, to white, depending on the impurities present in the jasper and the matrix material.
Uses: Due to its unique and attractive pattern, Brecciated Jasper is commonly used in jewelry, carvings, and decorative items. It's valued for its aesthetic appeal and the interesting geological story it
Jasper Cut!
RyanzRocks
Jasper is a type of chalcedony, which is a microcrystalline variety of quartz. Specifically, jasper is known for its opaque appearance and often comes in various colors, primarily red, yellow, brown, or green, due to the presence of impurities like iron oxides or other minerals. Here are some key characteristics of jasper:
Texture: Typically fine-grained with a smooth, sometimes waxy, surface.
Hardness: On the Mohs scale, jasper ranks between 6.5 and 7, making it quite durable.
Formation: Jasper forms in hydrothermal veins, volcanic rocks, or as sedimentary deposits. It can also occur in nodules or as a cementing material in conglomerates.
Jasper often exhibits patterns or banding, which can be quite striking, leading to its use in jewelry, decorative items, and even in ancient artifacts for its beauty and durability. Varieties of jasper include:
Picture Jasper: Known for its landscape-like patterns.
Red Jasper: Often uniform in color, used for its deep red hue.
Ocean Jasper: Characterized by orbicular pat
Agate Nodule Cut!
RyanzRocks
An agate nodule is a type of geological formation where agate, a variety of chalcedony (which is a microcrystalline form of quartz), forms within a nodule. Here's a more detailed explanation:
Formation: Agate nodules typically form in volcanic rocks, especially in cavities or vesicles left by gas bubbles in lava flows, or in sedimentary rock layers where silica-rich solutions seep into voids or around organic matter. Over time, these solutions deposit layers of silica, which eventually harden into agate.
Structure:
Nodule: The term "nodule" refers to a rounded mass embedded in rock. In the case of agate, the nodule often has a concentric or banded appearance due to the way silica layers are deposited.
Bands: Agate nodules are famous for their colorful, concentric bands, which can vary widely in color due to different mineral impurities present during formation.
Appearance: Agate nodules can be quite varied:
External: Often, the outside of the nodule is less colorful, sometimes covered by a layer of rough,
Leopard skin Jasper Cut!
RyanzRocks
Based on the image, this rock appears to be leopard skin jasper. Leopard skin jasper is known for its distinctive pattern that resembles the spots of a leopard, with a mix of colors including cream, brown, and dark spots or patches. The rock in the image shows a similar spotted pattern, which is characteristic of this type of jasper.
Green Tint Basalt Cut!
RyanzRocks
Based on the appearance of the rock in the image, it looks like it could be a type of basalt. Basalt is a common extrusive igneous rock formed from the rapid cooling of basaltic lava exposed at or very near the surface of a planet or moon. The rock in the image has a fine-grained texture with some darker and lighter inclusions, which is typical of basalt. The presence of vesicles (small holes) suggests it might be vesicular basalt, which forms when gas bubbles are trapped in the lava as it cools.
Solid! Noooooooo...
RyanzRocks
Metamorphic rocks are one of the three main rock types, alongside igneous and sedimentary rocks. Here's an overview of metamorphic rocks:
Formation:
Metamorphism: Metamorphic rocks form through the process of metamorphism, where existing rock types (protoliths) are subjected to high temperatures, pressures, or chemically active fluids without melting, leading to changes in their mineral composition, texture, or both.
Characteristics:
Texture: Metamorphic rocks can have either foliated or non-foliated textures:
Foliated: These rocks show a platy or layered structure due to the alignment of minerals under pressure. Examples include slate, schist, and gneiss.
Non-foliated: These rocks do not exhibit banding or alignment of minerals, often because they were formed under high temperature with less pressure. Examples include marble and quartzite.
Mineral Composition: The minerals in metamorphic rocks can be recrystallized from the original rock or new minerals can form. Common minerals include mica, chlorite, talc, and new forms of quartz, feldspar, or garnet.
Examples:
Slate: Formed from shale, it's fine-grained and splits into thin sheets.
Schist: Known for its platy minerals like mica which give it a shiny appearance.
Gneiss: Shows distinct banding of light and dark minerals, formed typically from granite.
Marble: Comes from limestone or dolomite; it's known for its ability to take a polish.
Quartzite: Created from sandstone, it's very hard and durable due to the tight interlocking of quartz grains.
Significance:
Geological History: Metamorphic rocks provide clues about past tectonic activities, mountain building events, and the thermal history of the Earth's crust.
Economic: Many are used as building materials due to their strength and aesthetic qualities (like marble for sculptures and buildings).
Scientific Research: They are studied to understand plate tectonics, metamorphic processes, and the history of the Earth's lithosphere.
Metamorphic rocks illustrate how dynamic and ever-changing the Earth's crust can be, showing that under the right conditions, rock can transform dramatically without melting.
Fossiliferous Limestone!
RyanzRocks
This rock appears to have a pattern and texture that is characteristic of fossiliferous limestone. Fossiliferous limestone is a type of sedimentary rock that contains visible fossils, often marine organisms like shells or coral. The dark coloration with lighter inclusions suggests the presence of fossilized remains within the limestone matrix.
Brecciated Jasper Cut!
RyanzRocks
Brecciated Jasper is a type of jasper that is characterized by its appearance as broken fragments or pieces of jasper that have been naturally cemented together. Here's a more detailed explanation:
Formation: Brecciated Jasper forms when existing jasper is fractured or broken into pieces due to geological processes like tectonic activity or weathering. These fragments are then cemented together by silica or other minerals, often quartz, which fills the spaces between the fragments.
Appearance: It typically has a distinctive, mosaic-like pattern where the jasper fragments are angular and vary in size, creating a visually striking contrast with the matrix that holds them together. The colors can range from red, brown, yellow, to white, depending on the impurities present in the jasper and the matrix material.
Uses: Due to its unique and attractive pattern, Brecciated Jasper is commonly used in jewelry, carvings, and decorative items. It's valued for its aesthetic appeal and the interesting geological story it tells.
Properties: Like other types of jasper, Brecciated Jasper is relatively hard (around 6.5 to 7 on the Mohs scale), making it durable for various uses. It also has a waxy to vitreous luster when polished.
This type of jasper not only adds beauty to various crafts but also provides insight into the geological processes that have shaped our planet.
Agate Nodule Cut!
RyanzRocks
An agate nodule is a type of geological formation where agate, a variety of chalcedony (which is a microcrystalline form of quartz), forms within a nodule. Here's a more detailed explanation:
Formation: Agate nodules typically form in volcanic rocks, especially in cavities or vesicles left by gas bubbles in lava flows, or in sedimentary rock layers where silica-rich solutions seep into voids or around organic matter. Over time, these solutions deposit layers of silica, which eventually harden into agate.
Structure:
Nodule: The term "nodule" refers to a rounded mass embedded in rock. In the case of agate, the nodule often has a concentric or banded appearance due to the way silica layers are deposited.
Bands: Agate nodules are famous for their colorful, concentric bands, which can vary widely in color due to different mineral impurities present during formation.
Appearance: Agate nodules can be quite varied:
External: Often, the outside of the nodule is less colorful, sometimes covered by a layer of rough, less translucent rock material.
Internal: Once cut or polished, the inside reveals the banded, translucent to semi-transparent agate with patterns that can be quite intricate, including eye-like formations, landscapes, or even dendritic patterns if manganese or iron oxides are present.
Uses:
Jewelry and Ornamentation: Due to their beauty and durability, agate nodules are cut into cabochons for jewelry, sliced into slabs for decorative items, or simply polished as display pieces.
Metaphysical: Some cultures attribute healing or spiritual properties to agate, using them for various forms of alternative therapy or as protective amulets.
Locations: Agate nodules can be found in numerous places around the world where conditions for their formation exist, including Brazil, Uruguay, Mexico, the United States (notably in Oregon for its famous thundereggs, which are a type of agate nodule), and parts of Europe.
Together forever!
RyanzRocks
An agate nodule is a type of geological formation where agate, a variety of chalcedony (which is a microcrystalline form of quartz), forms within a nodule. Here's a more detailed explanation:
Formation: Agate nodules typically form in volcanic rocks, especially in cavities or vesicles left by gas bubbles in lava flows, or in sedimentary rock layers where silica-rich solutions seep into voids or around organic matter. Over time, these solutions deposit layers of silica, which eventually harden into agate.
Structure:
Nodule: The term "nodule" refers to a rounded mass embedded in rock. In the case of agate, the nodule often has a concentric or banded appearance due to the way silica layers are deposited.
Bands: Agate nodules are famous for their colorful, concentric bands, which can vary widely in color due to different mineral impurities present during formation.
Appearance: Agate nodules can be quite varied:
External: Often, the outside of the nodule is less colorful, sometimes covered by a layer of rough, less translucent rock material.
Internal: Once cut or polished, the inside reveals the banded, translucent to semi-transparent agate with patterns that can be quite intricate, including eye-like formations, landscapes, or even dendritic patterns if manganese or iron oxides are present.
Uses:
Jewelry and Ornamentation: Due to their beauty and durability, agate nodules are cut into cabochons for jewelry, sliced into slabs for decorative items, or simply polished as display pieces.
Metaphysical: Some cultures attribute healing or spiritual properties to agate, using them for various forms of alternative therapy or as protective amulets.
Locations: Agate nodules can be found in numerous places around the world where conditions for their formation exist, including Brazil, Uruguay, Mexico, the United States (notably in Oregon for its famous thundereggs, which are a type of agate nodule), and parts of Europe.
Remember, while collecting agate nodules can be a hobby, it's important to do so responsibly, respecting private property and environmental regulations where applicable.
Brecciated Red Jasper Cut!
RyanzRocks
Brecciated Jasper is a type of jasper that is characterized by its appearance as broken fragments or pieces of jasper that have been naturally cemented together. Here's a more detailed explanation:
Formation: Brecciated Jasper forms when existing jasper is fractured or broken into pieces due to geological processes like tectonic activity or weathering. These fragments are then cemented together by silica or other minerals, often quartz, which fills the spaces between the fragments.
Appearance: It typically has a distinctive, mosaic-like pattern where the jasper fragments are angular and vary in size, creating a visually striking contrast with the matrix that holds them together. The colors can range from red, brown, yellow, to white, depending on the impurities present in the jasper and the matrix material.
Uses: Due to its unique and attractive pattern, Brecciated Jasper is commonly used in jewelry, carvings, and decorative items. It's valued for its aesthetic appeal and the interesting geological story it tells.
Properties: Like other types of jasper, Brecciated Jasper is relatively hard (around 6.5 to 7 on the Mohs scale), making it durable for various uses. It also has a waxy to vitreous luster when polished.
This type of jasper not only adds beauty to various crafts but also provides insight into the geological processes that have shaped our planet.
Lava Spud Cut!
RyanzRocks
Scoria is a highly vesicular, dark-colored volcanic rock that forms from the rapid cooling of gas-rich lava, typically basaltic in composition. Here's a more detailed explanation:
Formation: Scoria forms when lava with high gas content is ejected from a volcano. As the lava is propelled into the air, the gas bubbles within it expand rapidly due to the decrease in pressure, creating a frothy texture. When this frothy lava cools and solidifies quickly, it traps these bubbles, resulting in a rock full of cavities or vesicles.
Characteristics:
Texture: Scoria has a rough, porous texture due to the numerous vesicles or gas bubbles trapped within it. These vesicles can make up to 50% of the rock's volume.
Color: It is typically dark in color, ranging from black to dark brown or red, due to its basaltic composition. However, oxidation can sometimes give it a reddish hue.
Density: Despite being a rock, scoria is relatively lightweight because of its high porosity.
Uses: Scoria is used in various applications:
Construction: Due to its lightweight nature, it's used in lightweight concrete, as drainage material, and in landscaping.
Abrasive: Its rough texture makes it useful as an abrasive material.
Gardening: It can improve soil drainage in gardening.
Plume Cut!
RyanzRocks
Plume agate is a distinctive variety of agate, known for its unique and intricate patterns that resemble plumes, feathers, or even landscapes. Here are some key points about plume agate:
Formation: Plume agate forms when silica-rich solutions seep into cavities in volcanic rocks. The "plumes" are created by manganese or iron oxides that get trapped in the silica, forming these feather-like patterns.
Colors: The colors of plume agate can vary widely depending on the minerals present. Common colors include reds, browns, yellows, blacks, and whites, with the plumes often contrasting against the base color of the agate.
Locations: Notable locations where plume agate is found include Oregon in the United States (specifically, the Owyhee Mountain area), Mexico, and Brazil. Each location can produce agates with unique characteristics.
Uses: Plume agate is popular among collectors and is often used in jewelry like pendants, rings, and beads due to its aesthetic appeal. It's also valued in metaphysical communities, where it's believed to enhance one's connection to the Earth, promote creativity, and aid in grounding.
Care: Like other agates, plume agate is relatively hard (about 6.5-7 on the Mohs scale), making it durable for jewelry. However, it should be protected from sharp blows or extreme temperature changes to avoid cracking.
Identification: When identifying plume agate, look for the characteristic plume-like inclusions. These inclusions should appear as if they are floating within the stone, giving a 3D effect when viewed from different angles.
Plume agate's beauty lies in its natural patterns, which can look like trees, clouds, or even abstract art, making each piece unique.
Pretty Yellow Inside!
RyanzRocks
Brecciated Jasper is a type of jasper that is characterized by its appearance as broken fragments or pieces of jasper that have been naturally cemented together. Here's a more detailed explanation:
Formation: Brecciated Jasper forms when existing jasper is fractured or broken into pieces due to geological processes like tectonic activity or weathering. These fragments are then cemented together by silica or other minerals, often quartz, which fills the spaces between the fragments.
Appearance: It typically has a distinctive, mosaic-like pattern where the jasper fragments are angular and vary in size, creating a visually striking contrast with the matrix that holds them together. The colors can range from red, brown, yellow, to white, depending on the impurities present in the jasper and the matrix material.
Uses: Due to its unique and attractive pattern, Brecciated Jasper is commonly used in jewelry, carvings, and decorative items. It's valued for its aesthetic appeal and the interesting geological story it tells.
Properties: Like other types of jasper, Brecciated Jasper is relatively hard (around 6.5 to 7 on the Mohs scale), making it durable for various uses. It also has a waxy to vitreous luster when polished.
This type of jasper not only adds beauty to various crafts but also provides insight into the geological processes that have shaped our planet.
Botryoidal Plume Cut!
RyanzRocks
Plume agate is a distinctive variety of agate, known for its unique and intricate patterns that resemble plumes, feathers, or even landscapes. Here are some key points about plume agate:
Formation: Plume agate forms when silica-rich solutions seep into cavities in volcanic rocks. The "plumes" are created by manganese or iron oxides that get trapped in the silica, forming these feather-like patterns.
Colors: The colors of plume agate can vary widely depending on the minerals present. Common colors include reds, browns, yellows, blacks, and whites, with the plumes often contrasting against the base color of the agate.
Locations: Notable locations where plume agate is found include Oregon in the United States (specifically, the Owyhee Mountain area), Mexico, and Brazil. Each location can produce agates with unique characteristics.
Uses: Plume agate is popular among collectors and is often used in jewelry like pendants, rings, and beads due to its aesthetic appeal. It's also valued in metaphysical communities, where it's believed to enhance one's connection to the Earth, promote creativity, and aid in grounding.
Care: Like other agates, plume agate is relatively hard (about 6.5-7 on the Mohs scale), making it durable for jewelry. However, it should be protected from sharp blows or extreme temperature changes to avoid cracking.
Identification: When identifying plume agate, look for the characteristic plume-like inclusions. These inclusions should appear as if they are floating within the stone, giving a 3D effect when viewed from different angles.
Plume agate's beauty lies in its natural patterns, which can look like trees, clouds, or even abstract art, making each piece unique.
Plume Agate Glow!
RyanzRocks
Plume agate is a distinctive variety of agate, known for its unique and intricate patterns that resemble plumes, feathers, or even landscapes. Here are some key points about plume agate:
Formation: Plume agate forms when silica-rich solutions seep into cavities in volcanic rocks. The "plumes" are created by manganese or iron oxides that get trapped in the silica, forming these feather-like patterns.
Colors: The colors of plume agate can vary widely depending on the minerals present. Common colors include reds, browns, yellows, blacks, and whites, with the plumes often contrasting against the base color of the agate.
Locations: Notable locations where plume agate is found include Oregon in the United States (specifically, the Owyhee Mountain area), Mexico, and Brazil. Each location can produce agates with unique characteristics.
Uses: Plume agate is popular among collectors and is often used in jewelry like pendants, rings, and beads due to its aesthetic appeal. It's also valued in metaphysical communities, where it's believed to enhance one's connection to the Earth, promote creativity, and aid in grounding.
Care: Like other agates, plume agate is relatively hard (about 6.5-7 on the Mohs scale), making it durable for jewelry. However, it should be protected from sharp blows or extreme temperature changes to avoid cracking.
Identification: When identifying plume agate, look for the characteristic plume-like inclusions. These inclusions should appear as if they are floating within the stone, giving a 3D effect when viewed from different angles.
Plume agate's beauty lies in its natural patterns, which can look like trees, clouds, or even abstract art, making each piece unique. If you're interested in seeing or acquiring plume agate, looking into local gem shows, mineral clubs, or reputable online gem dealers would be a good start.
Thunderegg Inspection!
RyanzRocks
A Thunderegg is a geological structure similar to a geode but with unique characteristics. Here's an overview:
Formation: Thundereggs form within rhyolitic volcanic ash layers. They start as gas bubbles or steam pockets in the lava, which act as molds. Over time, these are filled with silica-rich fluids, mainly chalcedony, agate, jasper, or opal, creating intricate patterns and colors inside.
Appearance: On the outside, thundereggs look like ordinary, rough-textured rocks, often with a white-gray to reddish-brown surface. However, when cut and polished, they reveal a variety of internal structures, from solid agate or chalcedony cores to sometimes hollow centers with crystals.
Size: They can range from small, about the size of a baseball, to larger specimens over a meter across, though most commonly they are between two to six inches in diameter.
Locations: While Oregon, USA, is particularly famous for thundereggs, especially in counties like Crook, Jefferson, Malheur, Wasco, and Wheeler, they are found globally wherever the geological conditions are right. Other notable locations include Germany, Australia, Brazil, Canada, Mexico, Poland, Romania, and Turkey.
Cultural Significance: In Oregon, the thunderegg was designated as the state rock in 1965, reflecting its importance in local geology and culture. Native American legends attribute their formation to thunder spirits or gods throwing these rocks during thunderstorms.
Collection and Use: Thundereggs are popular among rock collectors for their unique beauty once cut open. They're often used in jewelry making or as display pieces due to their aesthetic appeal after being sliced and polished.
Variations: Each thunderegg is unique due to the minerals present in the area where it forms, leading to a wide variety in color, pattern, and structure even from the same bed.
This gives you a comprehensive view of what a thunderegg is, its formation, and its significance.
Love the tiny green inside!
RyanzRocks
Agate is a common type of chalcedony, which is a mineral in the quartz family and ia sometimes found in nodule form. It's known for its fine grain and bright, attractive colors, often displaying bands or layers. Here are some different kinds of agate:
Banded Agate: Characterized by its distinct, often concentric layers or bands of different colors. This is often what people think of when they imagine agate.
Moss Agate: Not truly an agate because it doesn't have the typical banding. Instead, it contains green inclusions that resemble moss, which are typically oxides of manganese or iron.
Fire Agate: Known for its fiery appearance, with layers that can display a play of colors due to the iron oxide inclusions. This type is often polished into cabochons for jewelry.
Lace Agate: Features intricate, lace-like patterns that are often more delicate than those of banded agate. Examples include Crazy Lace Agate.
Onyx: Sometimes considered a variety of agate, onyx has parallel bands, unlike the concentric bands of agate. It's commonly black and white but can come in other colors.
Fortification Agate: Named for its pattern that resembles fortifications or landscapes, with angular or curved bands.
Enhydro Agate: Contains water-filled cavities or inclusions. When shaken, you might hear the water inside.
Fairburn Agate: A type of banded agate found near Fairburn, South Dakota, known for its vibrant colors and tight banding.
Botswana Agate: Often features shades of pink, grey, and sometimes apricot, known for its wavy lines and patterns.
Lake Superior Agate: The state gemstone of Minnesota, characterized by its red, orange, and yellow bands, often with a fortification pattern.
Blue Lace Agate: Known for its light blue color with delicate white or darker blue bands, giving it a lace-like appearance.
Dendritic Agate: Contains inclusions that resemble tree-like or fern-like patterns, which are typically black or brown.
Tube Agate: Features tube-like structures within the stone, which can create interesting patterns when cut.
Laguna Agate: From the Laguna area in New Mexico, known for its bright red, orange, and yellow colors with white or black bands.
Sardonyx: Alternating bands of sard (a type of chalcedony, typically brown or red) and white or black onyx.
Each type of agate can have its own local varieties, named after the place where they're found, or based on unique characteristics like color, pattern, or inclusions. Agates are prized not only for their beauty but also for their metaphysical properties in various cultures, often symbolizing grounding, protection, and balance.
Dark reds!
RyanzRocks
The rock in the image appears to be a type of agate, likely with some unique features:
Banding and Patterns: The rock shows banding patterns which are characteristic of agates. These bands are typically formed by the deposition of silica from groundwater in cavities within volcanic rocks.
Colors: The colors range from white to orange and yellow, with some areas appearing to have greenish hues. This variety of colors can be due to inclusions of minerals like iron oxides or other trace elements.
Texture: The texture seems somewhat rough and natural, indicating it might not have been polished or significantly altered from its natural state.
Agates are known for their beauty and are often used in jewelry and decorative items.
Boring!
RyanzRocks
Sandstone is a sedimentary rock composed mainly of sand-sized mineral particles or rock fragments. Here's an overview of its formation, characteristics, uses, and more:
Formation:
Sediment Deposition: Sandstone forms from the deposition of sand grains in environments like beaches, riverbeds, deserts, or underwater, where water, wind, or ice transport sand particles to these areas.
Compaction and Cementation: Over time, these deposited sand grains are compacted by the weight of overlying sediments and cemented together by minerals like silica, calcium carbonate, or iron oxide, which precipitate from groundwater.
Diagenesis: This process involves chemical, physical, and biological changes after deposition, transforming loose sand into solid rock.
Characteristics:
Color: Sandstone can vary widely in color due to its mineral composition and the presence of impurities. Common colors include shades of tan, yellow, red, brown, and white.
Texture: Its texture depends on the size of the sand grains. It can range from fine to coarse-grained, with well-rounded to angular grains depending on the source rock and the distance traveled.
Porosity and Permeability: Sandstone often has high porosity, making it an important reservoir rock for oil, water, and natural gas. Its permeability varies with the degree of cementation and grain packing.
Types:
Quartz Arenite: Rich in quartz, clean with little matrix, often from beach or dune environments.
Arkose: Contains at least 25% feldspar, typically from rapid erosion of granite in mountainous regions.
Lithic Sandstone: Rich in rock fragments, indicating a source from weathered volcanic or metamorphic rocks.
Graywacke: A poorly sorted sandstone with a mix of grains and matrix, often from deep marine environments.
Uses:
Building Material: Due to its durability and aesthetic appeal, sandstone is widely used in construction for buildings, walls, and paving.
Landscaping: Its natural beauty makes it popular for garden decorations, pathways, and retaining walls.
Oil and Gas Industry: Its porosity makes it a prime candidate for reservoirs in the extraction of oil and natural gas.
Art and Sculpture: Its workability makes sandstone a favored material for carvings and sculptures.
Abrasives: Some types of sandstone, particularly those rich in quartz, are used to make sandpaper and other abrasive products.
Geological Significance:
Stratigraphy: Sandstone layers often represent specific environmental conditions, helping geologists understand past climates and landscapes.
Paleontology: Fossil footprints, trackways, and occasionally body fossils can be found in sandstone, providing clues about ancient life.
Resource Exploration: The characteristics of sandstone help in identifying potential oil and gas reservoirs.
Cultural and Historical Importance:
Sandstone has been used by humans for millennia, from ancient Egyptian monuments to medieval castles, and modern architecture. Its durability and variety have made it a cornerstone in many historical structures, contributing to its cultural significance.
Sandstone's appeal lies not just in its utility but also in its story, as each layer can tell tales of ancient environments, climates, and the geological processes that shaped our planet.
Globular cut!
RyanzRocks
This rock appears to be a type of **thunder egg**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, green, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
Bout' lost a finger on this one!
RyanzRocks
An agate nodule refers to a naturally occurring, rounded lump or mass of agate, a common variety of chalcedony and quartz. Agate nodules are prized for their beauty, with layers of different colors and patterns, often formed in volcanic rocks or ancient lava flows. Here's a detailed look at agate nodules:
Formation:
Volcanic Origins: Agate nodules typically form in cavities within volcanic rocks, such as basalt or rhyolite. When lava cools, gas bubbles can become trapped, creating cavities. Over time, silica-rich water fills these cavities, depositing layers of agate.
Layer Formation: The layers or bands in agate nodules are formed through successive depositions of silica from water. Each layer can represent a different period of deposition, with variations in color and pattern due to changes in the mineral content of the water or the environment.
Silica Deposition: As the silica-rich solution fills the cavity, it begins to crystallize from the outer edge towards the center. This can result in concentric layers or bands, giving agate its characteristic appearance.
Characteristics:
Banded Structure: Agate nodules are known for their banded or layered structure. These bands can range in color from white to grey, blue, red, brown, and even black, often in a single nodule.
Durability: Due to their quartz composition, agate nodules are relatively hard (around 7 on the Mohs scale), making them durable for use in jewelry or as decorative stones.
Size: Nodule sizes can vary significantly, from small pebbles to larger masses several inches in diameter. The size often depends on the original cavity size in the volcanic rock.
Types of Agate Nodules:
Banded Agate: Features distinct, often colorful bands, which are agate's most recognized form.
Fortification Agate: Has a pattern that resembles fortifications or landscapes, with sharp, angular lines.
Moss Agate: Not a true agate as it lacks banding but contains moss-like inclusions of green minerals.
Fire Agate: Known for its fiery appearance due to the way light refracts through its layers, often with a botryoidal surface.
Uses:
Jewelry: Agate nodules are cut and polished for use in a variety of jewelry, including rings, pendants, and beads.
Decorative Items: Larger nodules can be carved or polished for use as bookends, paperweights, or display pieces.
Gemstone: When cut into cabochons or faceted, agate from nodules can serve as a gemstone in more formal jewelry settings.
Healing and Metaphysical: Agate is believed by some to have healing properties or to bring balance and protection, leading to its use in alternative medicine or as a talisman.
Collection and Cutting:
Collection: Agate nodules are often found in riverbeds, beaches, or in the field where volcanic rocks outcrop. Collectors might find them as loose nodules or still embedded within the host rock.
Cutting: To reveal the internal beauty, agate nodules are typically cut in half or into sections. This exposes the layers and bands, which can then be polished to a high gloss.
Agate nodules, with their diverse patterns and colors, offer a fascinating glimpse into geological processes, making them not only beautiful but also scientifically interesting. Their wide availability and variety make them accessible to both professional gem cutters and amateur enthusiasts, contributing to their popularity in both the gemological world and as natural art pieces.
Big nodule cut!
RyanzRocks
An agate nodule refers to a naturally occurring, rounded lump or mass of agate, a common variety of chalcedony and quartz. Agate nodules are prized for their beauty, with layers of different colors and patterns, often formed in volcanic rocks or ancient lava flows. Here's a detailed look at agate nodules:
Formation:
Volcanic Origins: Agate nodules typically form in cavities within volcanic rocks, such as basalt or rhyolite. When lava cools, gas bubbles can become trapped, creating cavities. Over time, silica-rich water fills these cavities, depositing layers of agate.
Layer Formation: The layers or bands in agate nodules are formed through successive depositions of silica from water. Each layer can represent a different period of deposition, with variations in color and pattern due to changes in the mineral content of the water or the environment.
Silica Deposition: As the silica-rich solution fills the cavity, it begins to crystallize from the outer edge towards the center. This can result in concentric layers or bands, giving agate its characteristic appearance.
Characteristics:
Banded Structure: Agate nodules are known for their banded or layered structure. These bands can range in color from white to grey, blue, red, brown, and even black, often in a single nodule.
Durability: Due to their quartz composition, agate nodules are relatively hard (around 7 on the Mohs scale), making them durable for use in jewelry or as decorative stones.
Size: Nodule sizes can vary significantly, from small pebbles to larger masses several inches in diameter. The size often depends on the original cavity size in the volcanic rock.
Types of Agate Nodules:
Banded Agate: Features distinct, often colorful bands, which are agate's most recognized form.
Fortification Agate: Has a pattern that resembles fortifications or landscapes, with sharp, angular lines.
Moss Agate: Not a true agate as it lacks banding but contains moss-like inclusions of green minerals.
Fire Agate: Known for its fiery appearance due to the way light refracts through its layers, often with a botryoidal surface.
Uses:
Jewelry: Agate nodules are cut and polished for use in a variety of jewelry, including rings, pendants, and beads.
Decorative Items: Larger nodules can be carved or polished for use as bookends, paperweights, or display pieces.
Gemstone: When cut into cabochons or faceted, agate from nodules can serve as a gemstone in more formal jewelry settings.
Healing and Metaphysical: Agate is believed by some to have healing properties or to bring balance and protection, leading to its use in alternative medicine or as a talisman.
Collection and Cutting:
Collection: Agate nodules are often found in riverbeds, beaches, or in the field where volcanic rocks outcrop. Collectors might find them as loose nodules or still embedded within the host rock.
Cutting: To reveal the internal beauty, agate nodules are typically cut in half or into sections. This exposes the layers and bands, which can then be polished to a high gloss.
Agate nodules, with their diverse patterns and colors, offer a fascinating glimpse into geological processes, making them not only beautiful but also scientifically interesting. Their wide availability and variety make them accessible to both professional gem cutters and amateur enthusiasts, contributing to their popularity in both the gemological world and as natural art pieces.
Blah!
RyanzRocks
The rock in the image appears to be a piece of slate. Here are some characteristics that lead to this identification:
Color: Slate typically comes in shades of gray, but it can also be found in green, purple, or red due to mineral content or weathering. The rock in the image has a predominantly gray color.
Texture: Slate has a fine-grained texture, which is evident in the image. It's known for its ability to split into thin, flat layers, a property called slaty cleavage. This is due to the alignment of platy minerals like mica under pressure during metamorphism.
Fissility: The rock shows signs of being easily split into thin layers, which is characteristic of slate. This is because slate is a metamorphic rock derived from shale or volcanic ash, where the rock has been subjected to low-grade metamorphism, causing the minerals to re-align perpendicular to the direction of pressure.
Mineral Inclusions: The small lighter spots or inclusions could be quartz, feldspar, or other minerals that were part of the original shale or were introduced during metamorphism.
Slate is commonly used for roofing,
Bulbas glob cut!
RyanzRocks
This rock appears to be a type of **thunder egg**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, green, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
Geode Cut!
RyanzRocks
The formation of geodes begins with volcanic or sedimentary activity. In volcanic regions, geodes are often formed from the gas bubbles in lava flows. As the lava cools and hardens, these gas bubbles become cavities within the rock. Over time, mineral-rich groundwater seeps into these cavities, carrying dissolved minerals such as quartz, amethyst, calcite, or agate. As the water evaporates, the minerals are left behind, gradually lining the interior of the geode with crystals.
In sedimentary environments, geodes are formed through a different process. They typically originate in ancient limestone or shale beds. As water flows through these porous rocks, it carries minerals in solution. When the water enters a cavity or an empty space, such as a pre-existing animal burrow or a hollowed-out tree trunk, it can deposit the dissolved minerals, forming crystals inside the cavity. Over time, these crystals grow and develop into the characteristic interior of a geode.
The type of minerals found inside a geode depends on the specific geological conditions of its formation. Some geodes are filled with a single type of crystal, such as quartz or amethyst, while others exhibit a variety of minerals, creating a stunning array of colors and textures.
Robbed! Grabbed the wrong half!
RyanzRocks
This rock appears to be a type of **thunder egg**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, green, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
Brecciated Jasper Cut!
RyanzRocks
Brecciated Jasper is a form of chalcedony, belonging to the quartz family. It is known for its unique appearance characterized by broken or fragmented patterns within the stone. The term “brecciated” refers to the rock formation process where angular fragments of minerals or rocks are cemented together by a fine-grained matrix.
Brecciated Jasper typically features a mixture of colors, including red, brown, beige, and sometimes yellow, with veins or patches of other minerals interspersed throughout. These colors and patterns are a result of the mineral composition and the geological processes that formed the stone. Brecciated Jasper is primarily composed of silicon dioxide (SiO2), like all forms of quartz, but it also contains other minerals, which contribute to its distinctive appearance.
This type of jasper is valued for its aesthetic appeal and is often used in jewelry making, decorative objects, and lapidary work. In addition to its visual appeal, some people believe that Brecciated Jasper possesses metaphysical properties, such as promoting grounding, stability, and strength. It is also said to enhance vitality and stimulate creativity.
Thunderegg Cut!
RyanzRocks
This rock appears to be a type of **thunder egg**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, green, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
Brecciated Ball of Jasper Cut!
RyanzRocks
Brecciated Jasper is a form of chalcedony, belonging to the quartz family. It is known for its unique appearance characterized by broken or fragmented patterns within the stone. The term “brecciated” refers to the rock formation process where angular fragments of minerals or rocks are cemented together by a fine-grained matrix.
Brecciated Jasper typically features a mixture of colors, including red, brown, beige, and sometimes yellow, with veins or patches of other minerals interspersed throughout. These colors and patterns are a result of the mineral composition and the geological processes that formed the stone. Brecciated Jasper is primarily composed of silicon dioxide (SiO2), like all forms of quartz, but it also contains other minerals, which contribute to its distinctive appearance.
This type of jasper is valued for its aesthetic appeal and is often used in jewelry making, decorative objects, and lapidary work. In addition to its visual appeal, some people believe that Brecciated Jasper possesses metaphysical properties, such as promoting grounding, stability, and strength. It is also said to enhance vitality and stimulate creativity.
Geode Cut!
RyanzRocks
The formation of geodes begins with volcanic or sedimentary activity. In volcanic regions, geodes are often formed from the gas bubbles in lava flows. As the lava cools and hardens, these gas bubbles become cavities within the rock. Over time, mineral-rich groundwater seeps into these cavities, carrying dissolved minerals such as quartz, amethyst, calcite, or agate. As the water evaporates, the minerals are left behind, gradually lining the interior of the geode with crystals.
In sedimentary environments, geodes are formed through a different process. They typically originate in ancient limestone or shale beds. As water flows through these porous rocks, it carries minerals in solution. When the water enters a cavity or an empty space, such as a pre-existing animal burrow or a hollowed-out tree trunk, it can deposit the dissolved minerals, forming crystals inside the cavity. Over time, these crystals grow and develop into the characteristic interior of a geode.
The type of minerals found inside a geode depends on the specific geological conditions of its formation. Some geodes are filled with a single type of crystal, such as quartz or amethyst, while others exhibit a variety of minerals, creating a stunning array of colors and textures.
Crazy Lace Agate Cut!
RyanzRocks
Crazy Lace Agate, also known as Mexican Agate, is a Chalcedony variety with inclusions of Iron and Aluminum. This crystal’s physical pattern is completely unique and has large swirls, banding, and orbicular formations much resembling Ocean Jasper. The colors of the stone range from a cream to beige with red, black, brown, grey, and white patterns. Its crystal formation is perfect for cutting and carving. You will commonly find this stone in the shape of squares, circles, skulls, points, and tumbled. Crazy Lace Agate is believed to have been formed between 65-90 million years ago in Earth's Cretaceous period.
Big Daddy Plume Cut!
RyanzRocks
Plume Agate is a captivating variety of agate, renowned for its intricate and delicate feather-like inclusions. These mesmerizing formations resemble ethereal plumes or wisps suspended within the stone, creating a stunning visual effect. It belongs to the chalcedony family, characterized by its microcrystalline structure and vibrant colors.
Plume Agate derives its name from the feathery patterns that adorn its surface. These patterns are typically composed of mineral deposits, often in striking hues such as white, cream, pink, or red, contrasting against a translucent or opaque background. These intricate formations are formed through the slow crystallization of silica-rich solutions within cavities or fissures in volcanic rocks.
Each piece of Plume Agate is unique, showcasing a kaleidoscope of colors and patterns. The delicate plumes within the stone evoke a sense of tranquility and beauty, making it a highly sought-after gemstone among collectors and jewelry enthusiasts alike.
Plume Agate holds significant importance in the world of gemstones and jewelry for several reasons:
Aesthetic Appeal: Plume Agate’s captivating patterns and vibrant colors make it a favorite among jewelry designers and collectors. Its unique beauty adds an element of elegance and individuality to any piece of jewelry.
Metaphysical Properties: In addition to its visual allure, Plume Agate is believed to possess metaphysical properties that promote harmony, balance, and emotional healing. It is often used in alternative healing practices and spiritual rituals.
Collectibility: Due to its rarity and unique characteristics, Plume Agate is highly prized by gemstone collectors. Specimens with exceptional plume formations or intense colors can command high prices in the market.
Versatility: Plume Agate’s diverse color palette and patterns make it a versatile gemstone for jewelry design. It can be fashioned into various shapes and sizes, including cabochons, beads, and carvings, allowing for creativity and innovation in jewelry making.
Historical Significance: Throughout history, agates have been revered for their beauty and perceived mystical properties. Plume Agate, with its distinct plume-like inclusions, has been admired and utilized in adornments and talismans by ancient civilizations.
Plume Agate stands out as a gemstone of exceptional beauty, imbued with both aesthetic and metaphysical significance. Its popularity in the world of gemstones and jewelry continues to endure, captivating admirers with its mesmerizing patterns and timeless allure.
- https://geologyscience.com/gemstone/plume-agate/
Brecciated Jasper Cut!
RyanzRocks
Brecciated Jasper is a form of chalcedony, belonging to the quartz family. It is known for its unique appearance characterized by broken or fragmented patterns within the stone. The term “brecciated” refers to the rock formation process where angular fragments of minerals or rocks are cemented together by a fine-grained matrix.
Brecciated Jasper typically features a mixture of colors, including red, brown, beige, and sometimes yellow, with veins or patches of other minerals interspersed throughout. These colors and patterns are a result of the mineral composition and the geological processes that formed the stone. Brecciated Jasper is primarily composed of silicon dioxide (SiO2), like all forms of quartz, but it also contains other minerals, which contribute to its distinctive appearance.
This type of jasper is valued for its aesthetic appeal and is often used in jewelry making, decorative objects, and lapidary work. In addition to its visual appeal, some people believe that Brecciated Jasper possesses metaphysical properties, such as promoting grounding, stability, and strength. It is also said to enhance vitality and stimulate creativity.
Thunderegg Cut w/Opal!
RyanzRocks
These rocks appears to be a type of **thunder egg**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, green, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
Thundereggs?
RyanzRocks
These rocks appears to be a type of **thunder egg**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, green, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
Chalcedony & Crazy Lace Cut!
RyanzRocks
Crazy Lace Agate, also known as Mexican Agate, is a Chalcedony variety with inclusions of Iron and Aluminum. This crystal’s physical pattern is completely unique and has large swirls, banding, and orbicular formations much resembling Ocean Jasper. The colors of the stone range from a cream to beige with red, black, brown, grey, and white patterns. Its crystal formation is perfect for cutting and carving. You will commonly find this stone in the shape of squares, circles, skulls, points, and tumbled. Crazy Lace Agate is believed to have been formed between 65-90 million years ago in Earth's Cretaceous period.
Plume w/CrazyLace cut!
RyanzRocks
Plume Agate is a captivating variety of agate, renowned for its intricate and delicate feather-like inclusions. These mesmerizing formations resemble ethereal plumes or wisps suspended within the stone, creating a stunning visual effect. It belongs to the chalcedony family, characterized by its microcrystalline structure and vibrant colors.
Plume Agate derives its name from the feathery patterns that adorn its surface. These patterns are typically composed of mineral deposits, often in striking hues such as white, cream, pink, or red, contrasting against a translucent or opaque background. These intricate formations are formed through the slow crystallization of silica-rich solutions within cavities or fissures in volcanic rocks.
Each piece of Plume Agate is unique, showcasing a kaleidoscope of colors and patterns. The delicate plumes within the stone evoke a sense of tranquility and beauty, making it a highly sought-after gemstone among collectors and jewelry enthusiasts alike.
Plume Agate holds significant importance in the world of gemstones and jewelry for several reasons:
Aesthetic Appeal: Plume Agate’s captivating patterns and vibrant colors make it a favorite among jewelry designers and collectors. Its unique beauty adds an element of elegance and individuality to any piece of jewelry.
Metaphysical Properties: In addition to its visual allure, Plume Agate is believed to possess metaphysical properties that promote harmony, balance, and emotional healing. It is often used in alternative healing practices and spiritual rituals.
Collectibility: Due to its rarity and unique characteristics, Plume Agate is highly prized by gemstone collectors. Specimens with exceptional plume formations or intense colors can command high prices in the market.
Versatility: Plume Agate’s diverse color palette and patterns make it a versatile gemstone for jewelry design. It can be fashioned into various shapes and sizes, including cabochons, beads, and carvings, allowing for creativity and innovation in jewelry making.
Historical Significance: Throughout history, agates have been revered for their beauty and perceived mystical properties. Plume Agate, with its distinct plume-like inclusions, has been admired and utilized in adornments and talismans by ancient civilizations.
Plume Agate stands out as a gemstone of exceptional beauty, imbued with both aesthetic and metaphysical significance. Its popularity in the world of gemstones and jewelry continues to endure, captivating admirers with its mesmerizing patterns and timeless allure.
- https://geologyscience.com/gemstone/plume-agate/
Thought it would be three thundereggs!?!?
RyanzRocks
Based on the visual characteristics of the rock in the image, it appears to be an iron-rich sedimentary rock, possibly an ironstone or banded iron formation (BIF). Here are some key observations:
Color: The rock has a reddish-brown hue, which is typical of iron oxides like hematite (Fe₂O₃) or goethite (FeO(OH)).
Texture: The rock shows a layered or banded structure with a mix of different shades of red, brown, and some lighter minerals, which suggests it might be a sedimentary rock formed in layers over time.
Luster: The wet appearance gives it a glossy look, which can sometimes help in identifying minerals by enhancing their color and luster.
Composition: The presence of small white or light-colored inclusions could be quartz, calcite, or other minerals commonly found in iron-rich sedimentary environments.
Ironstones are often formed in ancient marine or lake environments where iron was precipitated out of the water and deposited in layers. Banded iron formations are particularly notable for their distinct layers of iron oxides and silica, formed under specific chemical conditions in the Earth's early history.
Thunderegg twins!
RyanzRocks
The rock in the image appears to be a type of **thunder egg** or **agate**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Agate has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of agate would typically be white or colorless. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest. Remember, rock identification can be complex due to the natural variability and the presence of multiple minerals in one specimen. Visual characteristics alone can sometimes lead to misidentification.
Love the green inside!
RyanzRocks
The rock in the image appears to be a type of **thunder egg** or **agate**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Agate has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of agate would typically be white or colorless. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest. Remember, rock identification can be complex due to the natural variability and the presence of multiple minerals in one specimen. Visual characteristics alone can sometimes lead to misidentification.
Chert, I think!
RyanzRocks
noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Bo-ring!
RyanzRocks
noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Filled with Eartones!
RyanzRocks
noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Was hoping for more color!
RyanzRocks
noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Oops!
RyanzRocks
noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
More earthtones and opal inside!
RyanzRocks
Opal is a hydrated amorphous form of silica, with a water content typically between 3 and 21% by weight, most commonly around 6-10%. It's deposited at relatively low temperatures and can be found in the fissures of various rock types, including limonite, sandstone, rhyolite, marl, and basalt. Here's a deeper look into opal:
Types of Opal:
Precious Opal: Known for its "play-of-color," which is an optical phenomenon where colors flash or change as the angle of light or observation changes. This effect is due to the diffraction of light through the microscopic silica spheres within the opal.
Common Opal: Lacks the play-of-color and can come in a variety of colors like white, black, grey, yellow, orange, red, or brown. It's often referred to as "potch" when not gem-quality.
Fire Opal: Typically ranges in color from yellow to orange to red and can be transparent to translucent. Fire opals can exhibit play-of-color, but their name comes from the fiery body color.
Boulder Opal: A type of opal naturally attached to its host rock. It's often cut with the host rock to provide stability and to enhance the visual appeal.
Matrix Opal: The opal fills the cracks and cavities within the host rock, creating a network of opal that's visible on the surface.
Formation:
Primary Opal: Forms through the slow deposition of silica from groundwater in cavities or fractures of rocks.
Secondary Opal: Can form by weathering or alteration of other minerals, often in more superficial environments or through the action of silica-rich waters.
Locations:
Australia: The world's leading source, especially for precious opal, with significant deposits in places like Coober Pedy, Lightning Ridge, and White Cliffs.
Ethiopia: Known for its black opals and more recently discovered opal fields.
Mexico: Famous for fire opals.
Brazil: Produces a variety of opals, including crystal opal.
Properties:
Hardness: Typically ranges between 5.5 to 6.5 on the Mohs scale, though it can be softer if less hydrated or harder if more silica-rich.
Luster: Can range from waxy to resinous to vitreous.
Transparency: Varies from opaque to semi-translucent to transparent.
2nd cut!
RyanzRocks
noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Looking for colors!
RyanzRocks
The rock in the image appears to be a type of chalcedony, possibly an agate or a similar variety. Here's why:
1. **Coloration and Banding**: The rock has a predominantly white or light gray color with some yellowish-brown inclusions. This kind of coloration and banding is typical for agates, which are a variety of chalcedony.
2. **Translucency**: Chalcedony, including agate, often has a translucent quality, which seems to be present in parts of this rock.
3. **Texture**: The rock's texture looks somewhat waxy or greasy, which is characteristic of chalcedony due to its fine-grained silica composition.
4. **Inclusions**: The yellowish-brown areas could be iron oxide or other mineral inclusions, which are common in agates and give them their varied colors. However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Chalcedony has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of chalcedony (if it could be powdered) would typically be white or colorless. - **Microscopic Analysis**: Looking at thin sections under a microscope could reveal the mineral composition more clearly. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest.
Beautiful Colors!
RyanzRocks
The rock in the image appears to be a type of jasper, specifically "Chicken Blood Stone" or "Cinnabar Jasper," known for its vibrant red, orange, and yellow inclusions. These colors are often due to the presence of iron oxides or cinnabar. Jasper is a variety of chalcedony, which is a form of silica, and is commonly used in jewelry, carvings, and decorative items due to its attractive colors and patterns.
Cross section cut!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Is it a Thunderegg?
RyanzRocks
The rock in the image appears to be a type of **thunder egg** or **agate**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Agate has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of agate would typically be white or colorless. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest. Remember, rock identification can be complex due to the natural variability and the presence of multiple minerals in one specimen. Visual characteristics alone can sometimes lead to misidentification.
What's inside this Thunderegg?!?
RyanzRocks
The rock in the image appears to be a type of **thunder egg** or **agate**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Agate has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of agate would typically be white or colorless. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest. Remember, rock identification can be complex due to the natural variability and the presence of multiple minerals in one specimen. Visual characteristics alone can sometimes lead to misidentification.
Thought it would be more colorful inside!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Pretty inside!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Circular Formation!
RyanzRocks
The rock in the image appears to be a type of **thunder egg** or **agate**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Agate has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of agate would typically be white or colorless. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest. Remember, rock identification can be complex due to the natural variability and the presence of multiple minerals in one specimen. Visual characteristics alone can sometimes lead to misidentification.
Pink layers!
RyanzRocks
The rock in the image appears to be a type of banded iron formation (BIF) or a similar iron-rich metamorphic rock. These formations are characterized by alternating layers of iron-rich minerals (like hematite or magnetite) and silica (often in the form of chert or jasper). The red and brown hues are indicative of iron oxides, which are common in such formations. Banded iron formations are significant geological indicators of ancient ocean conditions and are often found in Precambrian shield regions. They are not only of scientific interest but also have been historically mined for iron ore.
Clear/White Banding!
RyanzRocks
The rock in the image appears to be a type of chalcedony, possibly an agate or a similar variety. Here's why:
1. **Coloration and Banding**: The rock has a predominantly white or light gray color with some yellowish-brown inclusions. This kind of coloration and banding is typical for agates, which are a variety of chalcedony.
2. **Translucency**: Chalcedony, including agate, often has a translucent quality, which seems to be present in parts of this rock.
3. **Texture**: The rock's texture looks somewhat waxy or greasy, which is characteristic of chalcedony due to its fine-grained silica composition.
4. **Inclusions**: The yellowish-brown areas could be iron oxide or other mineral inclusions, which are common in agates and give them their varied colors. However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Chalcedony has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of chalcedony (if it could be powdered) would typically be white or colorless. - **Microscopic Analysis**: Looking at thin sections under a microscope could reveal the mineral composition more clearly. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest.
Tiny Thundereggs!
RyanzRocks
The rock in the image appears to be a type of **thunder egg** or **agate**. Here's why:
1. **Coloration and Banding**: The rock shows a combination of colors, including brown, white, and possibly some hints of other colors, which is typical for agates and thunder eggs. The banding pattern is also characteristic of agates, which form in cavities of volcanic rocks.
2. **Translucency**: Some parts of the rock are translucent, which is common in agates due to their chalcedony composition.
3. **Texture**: The rock's texture looks somewhat waxy or glassy, which is typical for agates that have been polished or naturally worn smooth.
4. **Inclusions**: The yellowish or brownish areas could be due to iron oxide or other mineral inclusions, which are often found in agates. Thunder eggs are nodules of agate found in volcanic rocks, and they often have a hollow or partially hollow interior filled with crystals or banded agate.
However, without specific tests like a hardness test, streak test, or chemical analysis, this identification remains speculative. For a more precise identification: - **Hardness Test**: Agate has a hardness of around 7 on the Mohs scale, meaning it should scratch glass but not be scratched by a knife. - **Streak Test**: The streak of agate would typically be white or colorless. - **Consulting a Geologist or Using Spectroscopy**: For a definitive identification, especially if this rock might be of value or scientific interest. Remember, rock identification can be complex due to the natural variability and the presence of multiple minerals in one specimen. Visual characteristics alone can sometimes lead to misidentification.
Was hoping for more red iside!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Solid Color Inside!
RyanzRocks
A nodule in geological terms refers to a small, irregularly rounded mass of a mineral or mineral aggregate that has a contrasting composition from the host rock in which it is found. Here are some characteristics and types of nodules:
Composition: Nodules can be composed of various minerals. Common examples include:
Concretions: Often made of minerals like calcium carbonate, iron oxide, or silica. They form by the precipitation of minerals around a nucleus (like a shell, bone, or other debris).
Chert Nodules: These are primarily made of microcrystalline quartz, silica, or opal, often found in limestone or chalk.
Manganese Nodules: Found on the ocean floor, these are rich in manganese and other metals like iron, nickel, copper, and cobalt.
Phosphorite Nodules: These contain high amounts of phosphate minerals, often found in marine sediments.
Formation:
Nodules generally form through diagenesis, the process where sediments are compacted and cemented into rock. The minerals precipitate out of solution around a nucleus, growing over time.
They can also form due to chemical reactions in the sediment or rock, often under conditions where there is a change in the chemistry of the surrounding environment.
Appearance: Nodules are typically hard, with a more or less spherical or elliptical shape, but they can be quite irregular. They often have a smooth surface and might be colored differently from the surrounding rock due to their different mineral composition.
Geological Context: Nodules can occur in various rock types, including sedimentary rocks like limestone, shale, and sandstone. They are particularly common in marine deposits where conditions are favorable for the precipitation of minerals.
When discussing nodules, it's important to specify the type because "nodule" is more a description of form and occurrence rather than a specific rock or mineral type. If you have a specific nodule in mind or find one, examining its composition and the context in which it's found will help in identifying what kind of nodule it is.
Pink n' White Inside!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #chert #quartz #quartzite #chalcedony #agates #nodules #sandstone #limestone #tumbling #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #geology #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal #geodes
Nice colors!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
What colors are inside?!?
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
Same as the outside!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
White Chalcedony Inside!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
Took forever to cut this one!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
Thought this Thunderegg would be hollow!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
Nice cut!
RyanzRocks
@RyanzRocks #noob #rockhound #rockformation #tumbling #agates #rocks #rockhounders #rockstructure #metamorphicrocks #metamorphic #igneousrocks #igneous #quartz #quartzite #geology #nodules #minerals #crystals #glowrocks #idahorockhunting #idahogems #rockcutting #thundereggs #chalcedony #opal #lavarock #rigidtools #ryobitools #riverrocks #translucentrocks #translucent #rockgarden #flow #vevortools #jasper #granite #caves #marble #carnelian #gneiss #limestone #calcite #gold #silver #botryoidal
1
comment
Time to cut!
RyanzRocks
Plume agate is a variety of chalcedony, a microcrystalline quartz, characterized by delicate, plume-like inclusions of various colors and minerals. These inclusions often resemble feathers, flowers, or flames, giving the agate a unique and visually appealing appearance.
Plume agate only forms in hotsprings with the help of thermophiles and extremophiles (microscopic organisms that like harsh and hot environments) collecting silica and other dissolved particles in silica rich hotsprings and depositing them in wild patterns within the agate.
A combination of clays, metals and minerals make up the cool colors and textures we experience.
There are many famous deposits of plume, flame and other varieties of textures made with the assistance of microbes.
Bout' lost a finger on this one!
22 days ago
54
An agate nodule refers to a naturally occurring, rounded lump or mass of agate, a common variety of chalcedony and quartz. Agate nodules are prized for their beauty, with layers of different colors and patterns, often formed in volcanic rocks or ancient lava flows. Here's a detailed look at agate nodules:
Formation:
Volcanic Origins: Agate nodules typically form in cavities within volcanic rocks, such as basalt or rhyolite. When lava cools, gas bubbles can become trapped, creating cavities. Over time, silica-rich water fills these cavities, depositing layers of agate.
Layer Formation: The layers or bands in agate nodules are formed through successive depositions of silica from water. Each layer can represent a different period of deposition, with variations in color and pattern due to changes in the mineral content of the water or the environment.
Silica Deposition: As the silica-rich solution fills the cavity, it begins to crystallize from the outer edge towards the center. This can result in concentric layers or bands, giving agate its characteristic appearance.
Characteristics:
Banded Structure: Agate nodules are known for their banded or layered structure. These bands can range in color from white to grey, blue, red, brown, and even black, often in a single nodule.
Durability: Due to their quartz composition, agate nodules are relatively hard (around 7 on the Mohs scale), making them durable for use in jewelry or as decorative stones.
Size: Nodule sizes can vary significantly, from small pebbles to larger masses several inches in diameter. The size often depends on the original cavity size in the volcanic rock.
Types of Agate Nodules:
Banded Agate: Features distinct, often colorful bands, which are agate's most recognized form.
Fortification Agate: Has a pattern that resembles fortifications or landscapes, with sharp, angular lines.
Moss Agate: Not a true agate as it lacks banding but contains moss-like inclusions of green minerals.
Fire Agate: Known for its fiery appearance due to the way light refracts through its layers, often with a botryoidal surface.
Uses:
Jewelry: Agate nodules are cut and polished for use in a variety of jewelry, including rings, pendants, and beads.
Decorative Items: Larger nodules can be carved or polished for use as bookends, paperweights, or display pieces.
Gemstone: When cut into cabochons or faceted, agate from nodules can serve as a gemstone in more formal jewelry settings.
Healing and Metaphysical: Agate is believed by some to have healing properties or to bring balance and protection, leading to its use in alternative medicine or as a talisman.
Collection and Cutting:
Collection: Agate nodules are often found in riverbeds, beaches, or in the field where volcanic rocks outcrop. Collectors might find them as loose nodules or still embedded within the host rock.
Cutting: To reveal the internal beauty, agate nodules are typically cut in half or into sections. This exposes the layers and bands, which can then be polished to a high gloss.
Agate nodules, with their diverse patterns and colors, offer a fascinating glimpse into geological processes, making them not only beautiful but also scientifically interesting. Their wide availability and variety make them accessible to both professional gem cutters and amateur enthusiasts, contributing to their popularity in both the gemological world and as natural art pieces.
Loading comments...
-
58:14
Winston Marshall
1 hour agoHollywood Insider SPEAKS OUT On Woke Hollywood & Trump’s A-List Allies | Andrew Klavan
3.05K3 -
LIVE
The Charlie Kirk Show
1 hour agoThe Greatest Pro-Life President + AMA | Gingrich | 1.24.2025
7,587 watching -
LIVE
The Dana Show with Dana Loesch
1 hour agoThe Dana Show LIVE From SHOT Show | Day 3
506 watching -
1:02:50
The Dan Bongino Show
3 hours agoAre You Tired Of Winning Yet? (Ep. 2408) - 01/24/2025
448K861 -
48:57
The Rubin Report
1 day ago'Real Time' Crowd Stunned as Bill Maher Gives a Brutal Message to Democrats with Adam Carolla
39.8K22 -
1:01:52
Dr. Eric Berg
3 days agoThe Dr. Berg Show LIVE January 24, 2025
15.8K5 -
38:56
Tudor Dixon
3 hours agoFrom Mob Life to Redemption with Michael Franzese | The Tudor Dixon Podcast
2.71K -
LIVE
The Shannon Joy Show
2 hours ago🔥🔥LIVE - Exclusive With Paul Stone! The Race For REAL. Trump’s Tariff Talk Sparking Mega Interest Gold, Silver, Land & Hard Assets🔥
667 watching -
1:01:38
The Big Mig™
1 hour agoGlobal Finance Forum From Bullion to Borders
10.2K2 -
11:50
MrBigKid
4 hours agoQuality AR15 for all? Cox Arms EMR-1 (Every Man's Rifle)
7.89K