4x4 PTO Driven Timber Trailer BUILD Ep.14 - Disassembly & Final Welding

2 years ago
44

Fabricating the clamp-on rear section of the 4x4 power take off shaft driven timber trailer frame. Lifting hydraulic crane off the trailer and taking the homemade trailer apart. Welding seams I couldn't access before and finishing welding the axle sled. Adding and removing frame braces.

Trailer specs:
* 28x11-14" tires & 14" rims
* 1450mm/57" wide; length and height - known, just have to re-check
* tandem axles with homemade chain housings
* BMW E39 530D differential with 2.81 gearing (identical to the UTV diffs)
* hydraulic crane with a boom & grapple for easier log loading & handling
* independent hydraulic power pack
* radio controlled hydraulic winch on the boom
* load capacity - 1-1,5 metric tonne

Stay tuned for the next episode & thanks for watching!

My other videos: https://www.youtube.com/DonnDIY/videos
Support me on: https://www.patreon.com/DonnDIY
Follow me on: https://www.instagram.com/DonnDIY

4x4 PTO Driven Timber Trailer BUILD series: https://youtube.com/playlist?list=PLkmF7FAZBzkXTeVlXqnK4C1_vWCCHie68

Homemade 4x4 UTV build: https://youtube.com/playlist?list=PLkmF7FAZBzkUZ3GjEo97GkWajmj9bCxzE

#donndiy #homemade #timbertrailer

Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

Loading comments...