Gibson Murphy Lab 1964 SG Heavy Aged demo
As our two friends agree in the thumbnail, the SG is a classic. Both George Harrison and notably Angus Young have used this guitar and Angus almost exclusively!
Born out of the commercial ashes of the then failed Les Paul model, the new Les Paul model confused a few back in 1961 as it bore little resemblance to the rather staid and traditional guitar that had been Les Paul's signature model since 1952. This one was a double cutaway with strange carvings and a tremolo system apparently made from a cut up sardine can which was half the thickness of the heavy predecessor.
It was still the Les Paul standard though!
Now, a few years later and the Les Paul model designation had vanished for reasons unknown and Gibson was calling this guitar the 'SG'.
Fender must have scared Gibson a little as the Stratocaster was taking off with its slinky double cutaway, light weight and whammy bar, so the SG was meant to compete. It didn't really.
However, it's never been out of production and stays popular to this day.
My one is a 2021 Custom Shop Murphy Lab re-issue and Heavy Aged. 2021 was the first year of the Murphy Lab and they went out of their way to make this thing look like a vintage original. Uncanny really. The Maestro Vibrola works as, by this time, Gibson had re-learned how to set the neck and to forge that spring steel to make the break angle actually work unlike a previous USA Robbie krieger model I owned (briefly). That one didn't work at all!
I'm demoing this into a Two Rock Classic Reverb and its 2x12" cabinet with a Rode NT1-A and Sure SM57 off axis slightly on the lower speaker and recorded into a Presonus Studio 68C and Studio One. No funny stuff in post!
Check out my website
www.gringopig.com
and feel free to like and subscribe for more!
Thanks for watching.
14
views
1
comment
Two Rock Classic reverb versus Laney Lionheart Loudpedal Reveal!
Following on from my comparison video where I demo mystery amps A & B, I now reveal the contenders!
In the last video, I compared a Two Rock Classic reverb and a Laney Lionheart Loudpedal through a 2x12" cabinet with a Surfybear reverb for consistency and asked if you could identify which was which.
Given that there is a gulf of difference in price, was there something obviously deficient in the Laney?
Was the Two Rock just an overpriced heap of junk?
Comments were posted. Inscrutable answers were made by me. Now it is time to reveal which is Amp A and which is Amp B.
I reprise a test first as a last chance to guess then give the game away in a flurry of excitement!!
Fun comparison really and I enjoyed it and loved the comments. Thank you all very much!
Visit my website:
www.gringopig.com
7
views
Amp Battle! Two Rock Classic Reverb Versus Laney Lionheart Loudpedal
Battle of the Price Points™
Pitting the £399 Laney pedal amp against the £5299 Two Rock behemoth in this video, I hope to show if there is any real sonic differences between these amps.
I am playing both of these through the same cab with 2 guitars: a Tele style guitar and a Les Paul and have a challenge to you.
Which one is the hugely expensive one and which one is the cheeky wee contender? Amp A or Amp B.
Have a go at guessing which one is Amp A and which one is Amp B.
I use an external reverb unit in the loop of both to not make it too obvious - a Surfybear Classic and play alternately A and then B with some cleanish lines.
I went for a slightly on the edge setting on both to allow the Les Paul to add a bit of dirt with the extra output from the humbuckers.
Comment below. Which one is Amp A? Which one is Amp B?
Remember, it's £399 versus £5299 in terms of price!
Is it worth it?
Visit my website
www.gringopig.com
and like and subscribe if you would like to!
Thanks for watching.
8
views
Laney Lionheart Loudpedal: 4 Guitars, No Talking!
Following on from my demo of this 60 Watt Class D powered amp-in-a-box offering from Laney, I did a video just concentrating on 4 guitars:
A T-style guitar, a 2014 Fender custom shop Stratocaster, a Gibson 1958 re-issue ES-335 and a Gibson custom shop 1956 Goldtop Les Paul with P90's.
I'm sticking to one tone throughout although reduced the gain for the Gibsons as they put out more signal but I hope this gives a good idea of what the tones are like out of this unit.
All sounds are from the 8 ohm output into a 2x12" cabinet with a Rode NT1-A and an SM57 on the bottom speaker but this unit fits into a rucksack with it's power supply (it's not internal) and all you need is to borrow a cab or plug straight in to a mixing desk with an XLR cable. Ultimate portability especially if you go to a gig by bus or walk and don't want to have a herniated disc humphing a huge heavy speaker cab about!
Have a listen! I bought mine new for £399 which I think is a great price for a solution that could cost you ££££'s plus for a more traditional set-up.
Visit my website:
www.gringopig.com
and please like and subscribe!
Thanks :-)
17
views
Laney Lionheart Loudpedal demo
This is a demo of an amp on the floor unit from Laney Amplifiaction.
I bought this recently after foolishly trying it out at a store and, having so far escaped the phenomenon of compact class D powered floor or pedalboard units, thought this was fantastic.
It was demonstrated at GuitarGuitar in Edinburgh recently by Tom Quayle and Martin Miller and although I didn't attend as I don't really care for 'Fusion' styles, I have been impressed by the styling of Tom Quayle. Such an amazing guitarist and he apparently likes Laney so much that he and Martin Miller got signature units. This one is the lower gain one endorsed by Tom Quayle.
He used this one at the event!
Laney have an illustrious history in Rock™ having been the main amplifier brand for Tony Iommi and they are the sound of Black Sabbath so another brand other than Marshall to be proud of and in fact, since this is made in the UK and a lot of Marshall stuff isn't anymore, it should be a source of pride here in Britain to have such a company.
I bought this with my own money and have no connection whatsoever with the maker by the way. I'm trying to be objective and I buy because I like things...
It's an analogue front end 2 channel amp in a box with a very loud 60 Watts of class D amp with options to power an 8 or 16 ohm cabinet or go direct into a mixer with the preloaded impulse responses on board. There is software too to load more.
It sounds good and will be perfect for gigs. Just pop it in the bag and go. No more bumping valves around and having the dreaded white cloud on the top of your precious and expensive output valves.
It could also be a great backup for your primary amp too and it's quite cheap for what it is really.
I'm using a PRS Silver Sky in this and a Two Rock 2x12" cabinet for the first part and straight into a Presonus Studio 68C for the IR loaded XLR output.
Check out my website:
www.gringopig.com
and like and subscribe if you want to as it does help.
10
views
2021 Martin Custom Shop Authentic 1937 000-28 For Sale
I am selling my friend's beautiful and unplayed Martin Custom Shop Authentic 000-28. The desire for an acoustic guitar can catch out the unwary electric player as the instruments are totally different to play and he was a victim!
However, you can be the beneficiary here as these are no longer available from Martin.
Barely used and in as new condition, a 2021 Martin Custom Shop Authentic 1937 000-28 in the low-gloss natural option finish.
This model replicates the exact construction of the venerable 1937 model but with an added truss rod to make it a usable modern guitar.
It features a Non V.T.S. Thin Adirondack Spruce (.110") top and beautiful East Indian Rosewood back and sides and construction elements to replicate the 1937 model including:
A Modified V 30s Style Heel with standard tapered neck, 1930 Style Belly with Glued in Long Saddle, a 2 5/16" bridge string spacing and 1 3/4" nut width, accurate vintage X bracing pattern with scalloped bracing and Waverly Nickel Open Back tuners.
From the Martin website, they describe this model so:
"The all-new Custom Shop 000-28 1937 rewards players with the sonic superiority of Martin’s Authentic Series and the everyday practicality of a workhorse guitar. Regarded as the cornerstone of performance, Martin’s highly prized 1937 models set the benchmark for generations of instruments that followed. This guitar sports time-tested features like Authentic bracing, hide glue and cloth strip construction, and an adjustable truss rod which gives enthusiasts the day-in, day-out reliability of an instrument that travels well AND responds to seasonal adjustments as it matures. With the all-new Custom Shop 000-28 1937 the stars have aligned again.
Visually, this Model takes advantage of our proprietary Vintage Low Gloss process with a selection of craft-quality finishes. It is available in a natural or vintage Ambertone burst finish AND your preference of our proprietary low-gloss or the new Stage 1 lightly aged finish. Lacking the heavy wear and tear of an instrument that’s seen considerable use, the Stage 1 finish with light cracking and crazing is inspired by those rare vintage instruments that were simply kept in the case and tucked away for decades. Our Stage 1 finish bears the marks of time but not the battle scars common on many vintage re-creations."
This guitar comes with unfitted end-pin and Martin hard case with key. It is basically unplayed. My friend has asked me to sell it for him and he is an electric player - as he discovered subsequent to this purchase!
So this is almost mint and was purchased by him new in 2023 from GuitarGuitar.
It also sounds fantastic. Unlike my friend, I do like acoustics and have Martins myself and this one is really great - open and loud with a zing and sparkle but plenty of controlled bass which makes you wonder why you would want the hefty size of a Dreadnought.
See my website for more details:
https://www.gringopig.com/2021martincustomshopauthentic1937000-28
Or look on ebay:
https://www.ebay.co.uk/itm/145785016466
Or on Reverb:
https://reverb.com/uk/item/82256803-2021-martin-custom-shop-expert-000-28-authentic-37-000-28-natural-non-aged
Or Gumtree in the UK:
https://www.gumtree.com/p/guitar-instrument/2021-martin-custom-shop-expert-000-28-authentic-37-000-28-natural-non-aged/1479626966
UK sales only sorry.
Thanks for watching and like and subscribe if you enjoy the content please.
18
views
New Gibson 1958 ES-335 Limited Edition ES-335 demo
This is a new model made in limited quantities to celebrate Gibson's 130th year and is a recreation of a very early 1958 ES-335.
The very early models featured Gibson's new fangled Humbuckers as standard and an unbound fingerboard which soon became bound later in the year. It was a new concept for Gibson and the brainchild of Ted McCarty - a hollow body look from the front but thin in depth and with a solid block of maple running the length of the guitar. This cut down the resonances that would cause uncontrollable feedback when a purchaser turned his amplifier up; as guitarists are known to do funnily enough.
Gibson are doing 130 of each colour: tri-burst, tobacco sunburst and blonde and it looks like the blondes have sold out already. I was lucky to get this one and I'm playing it through a Two Rock Classic Reverb with guest star, my 1974 Norlin era 335 as contrast.
These guitars have achieved iconic status and Gibson has chosen it to represent their 130th birthday.
The aging is spot on and I would be hard pressed to tell this apart from a real one. Except of course for the price!
It isn't cheap but as my 1974 cost me an Ibanez Blazer plus £495 back in the early 1980's, it better be good.
Luckily it is fantastic. The attention to detail in the heavy relic finish on this tobacco sunburst is amazing but it's the sound of those unpotted custombuckers and the feel of the guitar that win the day for me.
I have recorded this with 2 microphones: an SM57 and Rode NT1-A into a Presonus Studio 68C with no compression, added reverb or any post processing at all - just the sound of the guitars into a Two Rock Classic Reverb just as I heard it in the room.
All items bought by me and no sponsorship or funny stuff.
Please like and subscribe as it really helps a small channel and visit my website at
www.gringopig.com
for more geeky guitar stuff.
Thanks!
8
views
2020 Squier Affinity demo
A borrowed gem: a 2020 Squier Affinity Strat plugged into a Friedman JEL-20.
Firstly into the Plexi Channel and then into the hot Channel, Channel 2 for some distorted fun!
This is a guitar I did a demo of in comparison to a Fender custom shop and had the amp set relatively clean to draw out any differences.
No such restriction here and it's full on Friedman Grind™ all the way.
Plexi Channel overdrive then face melt Channel 2.
What a fun, great sounding guitar!
Please visit me at
www.gringopig.com
and like and subscribe!
7
views
1965 Fender Jaguar in Candy Apple Red demo
Candy Apple Red. Tasty but bad for your teeth.
Not so the 1965 Fender Jaguar. That is only bad for your wallet.
Here's a solo demo of the guitar that featured as part of my Jaguar Shootout video.
I bought this from JTKM Studio recently and it is very nice indeed and in excellent condition.
I had a fret dress done and added Staytrem bridge and tremolo arm and collet as I always do to offset guitars and it plays like a dream.
So this was recorded into an Origin Effects RevivalDRIVE and then into a Two Rock Classic Reverb. The amp was recorded with a Rode NT1-A and SM57 straight into a Presonus Studio68C and Studio One without any processing or change in the sound.
The previous video was clean, so I decided to add a little rock'n'roll flavour to this one and tried to show that the Jaguar isn't some cliched 'shoegaze' guitar or 'surf' or whatever genre people claim to think the Jaguar is best used for. It's a guitar. It can play anything. In fact, a Les Paul can't do what the Jaguar can do.
I do love Les Paul guitars too though.
Visit my website
www.gringopig.com
and like and subscribe as it does help small channels and independent creators not give up in despair :-)
Thanks!
12
views
Vintage Fender Jaguar Shootout!
The Fender Jaguar™. Much misunderstood due to either being considered an 'indie' guitar and plugged into a sea of effects pedals or a guitar played by wanna-be Beach Boys surf people, the main downfall of this top-of-the-line Fender was Jimi Hendrix. As soon as Hendrix strapped on his Strat, the Jaguar's days were numbered.
Later on, players looking for something cheap picked them up and the reputation of the Jaguar being an 'indie' guitar arose - beloved of effects pedal jockeys and hipsters.
However, all of this is tosh. As wrong as suggesting the Jaguar is 'short scale'. It isn't. If it was then a Gibson Les Paul should be as the scale length is almost the same.
Anyway, I was turned onto Jaguars by Kurt Vile and the tremolo swoops he does just sounded incredible so I bought an old one as the price wasn't that much more than a Fender Custom Shop.
I have bought more in the intervening years and I have done this shootout of 5 Jaguars:
1962 slab board sunburst
1965 original Olympic White
1965 original Black
1965 original Candy Apple Red
1967 original Lake Placid Blue CBS era block and binding.
Just to see what the differences were and just because it was a cool idea to do!
I recorded this with a Two Rock Classic Reverb into a Two Rock 2x12" cabinet using an SM57 and Rode NT1-A. Then into a Presonus Studio 68C and Studio One with no post processing or effects.
The reverb is from the amplifier entirely.
I do an intro for each then some examples of the guitars. The last section is a sequence of each guitar back to back for each pickup combination.
I love Jaguars. I use 11-52 gauge strings and Staytrem bridges. 4 of the 5 have Staytrem tremolo bars and collets too. They stay in tune perfectly and you can really rip on the tremolo bar and tuning remains rock solid.
Try THAT on a Stratocaster Mr. Hendrix!
Visit my website for more:
www.gringopig.com
and thanks for watching. Please like and subscribe should you want to.
:-)
20
views
Custom Broadcaster Build demo
This is a demo of my mostly complete Broadcaster Partcaster build. It's just waiting on an Allparts FAT neck from Golden Era guitars. Come on Scott, get a move on!!
It was bought from an auction house: Gardiner Houlgate and I set about replacing hardware with a Callaham bakelite pickguard, Fender bridge plate and Callaham saddles, A set of Monty's Broadcaster pickups and loads of single slot screws and other hardware from Charles Guitars.
I said it was a Callaham wiring loom but it's actually a Charles Guitars loom. Oops
The body appears to be a one piece ash and came with an ultra skinny Fender neck from 1992. It must have come from an early '90's '52 re-issue and looks aged. It actually looks really aged just like the real thing but I'm sure it was expertly done as the frets look perfect. They may be low and skinny but that was vintage frets for you.
So I did a video of it before it gets its chunky neck.
I played it into a Two Rock Classic Reverb miced with a Rode NT1-A and SM57 straight into a Presonus Studio68C and recorded in Studio One.
No processing was used on the guitar parts and they sound like they did in front of the amp.
Please visit my website:
www.gringopig.com
and like and subscribe if you would like!
:-)
15
views
Custom 1955 T-Style build demo
Here's my new Partscaster!
So called because it's made from parts I bought and assembled in the hope it might sound good. Well I think it did...
It comprises:
An Axecaster purchased ash body with ferrules
MusiKraft Tele neck with D shape 0.9" to 1.0", fretted and tinted.
Monty's Broadcaster and full Monty neck pickups
Callaham bridge
Kluson aged tuners
Various parts from Charles Guitars
Neck to body assembly and nut from Bob at GuitarGuitar Edinburgh
I quite fancied doing another Tele build as it's simpler than a Strat in terms of set up and I like the Telecaster sound, so I fully assembled the body in preparation for the MusiKraft neck to come from the US. Very nice it is too! Highly recommended for the feel and quality. It came with frets but I ordered it without a nut so I asked Bob at Edinburgh GuitarGuitar to do one of his excellent nuts and drill the neck to match the body.
The Hosco body was a bit wider at the pocket than the neck weirdly so they don't obey the unwritten laws of Fender assembly but luckily Bob sorted all this out for me and the setup is perfect on it.
The Monty's pickups are ace and this one in particular has a sound with the tone control that remains clear even when turned down fully. It sounds more like a cocked wah than a muffled woolly sound like you normally get. Odd but just a fluke of the components given I bought a standard 0.047uF Sozo cap just like last time.
So here's my demo through a Two Rock Classic Reverb miced up with Rode NT1-A and SM57 and recorded without effects and no post processing with a Presonus Studio 68C and Studio One.
Check out my website for more!
www.gringopig.com
and please like and subscribe if you want to.
:-)
2
views
Huber Orca 59 with Mojo NOS 59 PAFs
I modified my Huber Orca 59 with a couple of special humbuckers. Marc from Mojo pickups in the UK must have unearthed a reel of old wire from the era that birthed the Golden Era™ Les Paul guitars.
Maybe an abandoned engineering works in a northern industrial town, or a ghostly transformer factory lying in dilapidated condition just outside Manchester perhaps?
Wherever he found it, he made some pickups with it and created a PAF replica. he makes great pickups and I have heard these in a Les Paul owned by my pal Brian. They sound fantastic.
I decided to take out the Häussel humbuckers as I wanted unpotted ones. The Häussel ones are good I have to say but I wanted the extra top end airiness that unpotted pickups exhibit and wanted to try the Mojo. I had to lose the 4 wire coil split function but I never really used it anyway and in the new ones went.
I did an earlier demo with the Orca 59 into my Fender Twin Reverb so decided to play through that again and you can watch the first one to get a sense of what the Häussel pickups sounded like.
Link in the end screen!
I think the Mojo NOS PAFs sound amazing!
I do some clean playing into the Twin Reverb on the vibrato channel 1 on a setting of 4 and later turn on a Benson pre-amp for some dirt. I recorded without any post effects and tried to be as true to the sound in the room as possible with a Rode NT1-A and an SM57 going into a Presonus Studio68C then Studio One.
I bought everything with my own money and am sponsored by no-one!
Visit my website for more!
www.gringopig.com
and like, subscribe if you want to
:-)
00:00 Intro
02:08 Clean neck pickup
03:34 Clean both pickups
04:18 Clean bridge pickup
05:11 Clean neck pickup again
05:27 Clean both pickups
06:21 Clean neck pickup
06:48 Clean bridge pickup
08:15 Clean both pickups
08:42 Clean neck pickup
09:07 Fingerpicking clean on bridge
09:44 Fingerpicking clean on both together
10:22 Fingerpicking clean on neck pickup
11:12 Benson pre-amp and neck pickup
12:09 Benson pre-amp and both pickups
12:33 Benson pre-amp and bridge pickup
16:10 Benson pre-amp and both pickups
16:51 Benson pre-amp and neck pickup
17:45 Dirty chords neck pickup
18:28 Dirty chords both pickups
19:07 Dirty chords bridge pickup
11
views
2023 PRS Silver Sky 'Dead Spec' demo
An American phenomenon, Grateful Dead have always been a slight puzzling thing to the rest of the world. Pioneers in fusing improvisational aspects of jazz with the bluegrass sounds of their roots, Grateful Dead were unique. The history of Grateful Dead and the American countercultural movement were parallel although they avoided political concerns almost totally, existing in a peculiar space of being seers to the tie-dyed bus-living fans that were fanatical about their scene and almost being completely distant from them.
Jerry Garcia was the main focus. He was sharp and insightful, funny and passionate about music as well as being subject to the burden of drug addiction. As much as the fans loved Uncle Jerry, he was very different from how they viewed him.
So when he died in 1995, it was not really possible for them to continue. I was at a Dead concert in Oakland 1989/90 but only in the parking lot while they played but more people were outside than in.
Some were outside and inside at the same time!
So when John Mayer joined the offshoot Dead and Co. with Bob Weir and Mickey Hart, I was astounded to hear him play exactly like Jerry Garcia. It was uncanny!
Garcia had a unique style but Mayer is such a great player he nailed the tone and the free flowing spidery bop lines.
The last tour in summer 2023, John Mayer asked Paul Reed Smith to make him a special Silver Sky with some of the features that marked one of Garcia's best known guitars: Alligator.
A '50's Strat made from parts with distinctive stickers, brass all over, a string retainer on the low 4 strings and a custom pickguard and bridge with an Alembic Strat-o-blaster installed.
This was on board pre-amp made by the Alembic company which has strong ties with Grateful dead and can still be bought by the name 'Blaster' as Fender found issue with the name.
This 'Dead Spec' Silver Sky is therefore a signature of John Mayer with a loving nod to Jerry.
1000 made as a limited edition, I demo this through a Two Rock Classic Reverb straight in with no effects and turn it up a bit with an Tone King Ironman attenuator.
I hope you can hear the differences between the Dead Spec and the standard models: a 2023 rosewood board Moc Sand and a 2020 maple board Lunar Ice - also a limited edition.
Mics: Rode NT1-A. SM57
Interface: Presonus Studio 68C
DAW: Studio One
Amplifier: Two Rock Classic Reverb turned up a bit
Visit my website www.gringopig.com for more guitars, amps and basses plus features.
Enjoy!
Please subscribe if you want to.
00:00 Intro about PRS Silver Sky
00:06 2023 Silver Sky rosewood board Moc Sand
02:29 2020 Silver Sky maple board Lunar Ice
04:05 2023 Silver Sky Dead Spec
07:48 Dead Spec neck pickup Blaster off
08:04 Dead Spec neck pickup Blaster on
08:24 Dead Spec neck and middle Blaster off
08:24 Dead Spec neck and middle Blaster on
09:03 Dead Spec middle Blaster off
09:21 Dead Spec middle Blaster on
09:44 Dead Spec middle and bridge Blaster off
09:59 Dead Spec middle and bridge Blaster on
10:24 Dead Spec bridge Blaster off
10:42 Dead Spec bridge Blaster on
11:15 Dead Spec bridge Blaster off - chord
11:26 Dead Spec bridge Blaster on - chord
11:40 Dead Spec bridge and middle Blaster off - chords
12:07 Dead Spec bridge and middle Blaster on - chords
12:27 Dead Spec middle Blaster off - chords
12:48 Dead Spec middle Blaster on - chords
13:13 Dead Spec middle and neck Blaster off - chords
13:35 Dead Spec middle and neck Blaster on - chords
13:54 Dead Spec neck Blaster off - chords
14:11 Dead Spec neck Blaster on - chords
14:58 2023 Silver Sky rosewood board all positions
18:37 2020 Silver Sky maple board all positions
20:58 Dead Spec Blaster on middle position only
22:51 Dead Spec Blaster on neck and middle
24:28 Dead Spec Blaster on middle position
124
views
2022 Fender custom shop 1960 Precision bass demo
A demo of my Fender Precision bass as I try vainly to play like James Jamerson. Sadly, I cannot approach that man's genius however I can but try.
This is a 2022 custom shop heavy relic Precision bass with La Bella flat would strings, tone rolled off and played into an Aguilar Tone Hammer 500 amp with the signal taken out via XLR into a Presonus Studio68C and recorded with Studio One.
I made a backing drum track with EZ Drummer and played live with it. I then added a smidgen of compression in post on the bass.
For more, please visit www.gringopig.com and give me a like. It matters to us small creators!
:-)
9
views
Fender custom shop 1972 Telecaster custom demo
Made as a limited edition in 2020, this oddball guitar features what appears to be a set of 1970's Tele Custom attributes.
Look closer however and there is no bullet truss rod. Turning it over and you will find a 4 bolt limited edition neck plate plus a very flamey neck too.
So, this is ostensibly a re-issue of the first year release of the Gibson beating revamped Telecaster. It was shortly followed by its sister model, the Deluxe which featured 2 wide range CuNiFe pickups.
This was the first time Fender actually made the proper wide range pickup with the unique magnetic material which I believe is an alloy of Copper, Nickel and Iron (Cu/Ni/Fe) and it sounds incredible!
Unlike the often done drop in PAF style humbucker which always is hard to balance, the lower output wide range humbucker slots in well with the traditional Tele bridge. It's not as dark.
The guitar also has 3 brass saddles unlike the 6 of the original and reading the spec, the body is modelled after a '67 with a C oval neck measuring 0.850" to 0.920" at the heel. Not too thin but not like a 60's style to my hand really either.
I like the Gibson control layout a lot and It's a light guitar! 2 piece ash but it's really light and resonant.
I'm playing it into the plexi channel of my Friedman JEL-20 with a Strymon Flint on spring in the loop.
That's going into an EVM 12L loaded Zill Fatbaby cab and miced up with a Rode NT1-A and SM57 off axis by the dustcap. I record into a Presonus Studio 68C and Studio One.
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
23
views
2
comments
Friedman JEL-20 demo: Channel 2 Pure Filth!
Dave Friedman's new amp, which has been garnering a lot of attention for its fantastic gain channel, is given a demo here and I'm switching to the main attraction: Channel 2
This is a 20 Watt Marshall inspired valve head which has a complement of 3 12AX7 and 2 EL84 valves in the pre-amp and power section respectively. 20 Watts is LOUD though. It's not a bedroom amp but in comparison to the Jake E Lee 100 Watt version, this one is actually useable outside stadia.
Jake E Lee is a fantastic guitarist who, to my shame, was unknown to me prior to this signature amp being released but having listed to Ozzy's 'Bark at the Moon', I can see why he is so revered.
So my demo features a Gibson Les Paul 1968 re-issue with Humbucker Alnico III pickups and I'm cutting to the chase and just going max on the channel. I didn't use the pull boost so rest assured, there is even more gain on tap but the pickups in the Les Paul aren't potted and I don't want to sound like a pig being slaughtered. I was using a Tone King Ironman II attenuator as well and a Strymon Flint reverb in the loop at the back of the amp. The presence at the back was set to noon.
I'm recording with an SM57 and Rode NT1-A on a Zilla cab with an EVM 12L and the mic is slightly off X axis.
Hopefully you get the idea that this amp is hugely versatile and the combination of foot switchable channels could be perfect for any style. Switch to the raging beast of channel 2 and you have everything.
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
34
views
Friedman JEL-20 demo: Channel 1 Plexi Clean
Dave Friedman's new amp, which has been garnering a lot of attention for its fantastic gain channel, is given a demo here but for this one, I'm sticking to the Plexi channel.
I'll try to give some idea that the amp isn't just a metal monster but actually a great amp for all styles.
This is a 20 Watt Marshall inspired valve head which has a complement of 3 12AX7 and 2 EL84 valves in the pre-amp and power section respectively. 20 Watts is LOUD though. It's not a bedroom amp but in comparison to the Jake E Lee 100 Watt version, this one is actually useable outside stadia.
Jake E Lee is a fantastic guitarist who, to my shame, was unknown to me prior to this signature amp being released but having listed to Ozzy's 'Bark at the Moon', I can see why he is so revered.
My demo can't really compete with the shredders and Metal Chuggers™ doing demos of this amp. There are great demos out there, so I thought I would do a part 1 with the amp featuring only the 'clean' channel: channel1.
It's not exactly Fender Twin clean but in comparison to the monster gain of channel 2 it can be described as the Plexi Channel. That is, the sound of an old '60's Marshall without master volume, made in the days where loud was loud and distortion could only be obtained by turning the amp up to apocalyptic levels. This amp in fact has 2 master volumes and 2 gains as it is a 2 channel amp but that gives you 2 completely different voicings available.
So my demo features firstly a Gibson Les Paul 1956 re-issue with P90 pickups and then a PRS Silver Sky. I run through the pickups of each and you can see in the video where the controls were set for each example. I was using a Tone King Ironman II attenuator as well and a Strymon Flint reverb in the loop at the back of the amp. The presence at the back was set to noon.
I'm recording with an SM57 and Rode NT1-A on a Zilla cab with an EVM 12L and the mic is slightly off X axis.
Hopefully you get the idea that this amp is hugely versatile and the Plexi channel could be perfect for any style. Foot switchable to the raging beast of channel 2 and you have everything.
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
36
views
Strat Battle! Pitting the Silver Sky against a Fender
If John Mayer left Fender to use his Silver Sky model then surely there must be something about the PRS that Fender cannot do?
In this demo, I take a 2020 Lunar Ice Silver sky, a 2023 Moc Sand with a rosewood fingerboard and a 2014 Fender custom shop 60th anniversary '54 model and make a comparison.
Does the Silver Sky compete? Does the rosewood board sound 'darker' than a maple one?
Lots of interesting questions...
I was always told that a rosewood board would sound darker and more 'woody'. I was sort of sceptical really as a lot of information on the internet is just nonsense. So I am putting it to the test.
Bear in mind that any differences could be down to the setup or the pickups but in this case I have meticulously duplicated the factory set up of the rosewood board one (which was stock from the factory) on the maple board Lunar Ice, which need a set up after purchase as the previous owner had made it a floating tremolo. All pickup heights and string heights are identical and with fresh strings on all 2 guitars, it's interesting try them.
I'm using a Two Rock Classic Reverb and for the first round, straight in clean. For the next 2 I'm using an Origin Effects Revival drive for some very light dirt. I don't want to flood any subtle differences with distortion.
What do you think?
Can you hear the difference between the maple and rosewood? Is the Fender better or worse?
I am using 2 microphones on one 12" speaker of the Two rock 2x12" cab: a Rode NT1-A and an SM57 placed centre and to the left of the cone just off axis.
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
I'm going to start uploading to Rumble from now on as well as YouTube as I really object to the advertising and restrictions of that platform
22
views
Friedman JEL-20 does Whipping Post
I was asked to see if the new JEL-20 could do the old Skool 70's rock stuff: specifically the Allman Brothers Band style.
So, here is a demo done to try and replicate the sort of sound you can get if you use the Plexi channel (Channel 1) with the Sat switch on to get that pumped power section feel with an arrangement of sorts of something that might be an Allman Brothers feel.
The video is a series of pictures showing the settings and the guitar used. Presence is midway on the back.
I used Studio One to mix and master this, so there is processing on pretty much everything.
Guitar was a Gibson Les Paul 1959 60th Anniversary, drums from EZdrummer3, Bass was a Fender Jazz and other guitars were the same Les Paul just turned down a notch.
The Friedman JEL-20 can definitely do this sound. Plus high gain. Plus clean. What a great amp!
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
30
views
Friedman JEL-20 demo. Red hot!
A short demo of the new Friedman JEL-20. Dave Friedman's new Jake E. Lee signature amp. Cut down to 20W but no less fire breathing than the 100W version.
The amp is set to channel 2 without pull boost but with the Sat switch on for the first bit then off for the second. The pull boost takes it into another level of gain really and I wonder how much gain you really need. Perhaps an awful lot? Well you got it.
The guitar is a Gibson Les Paul 60th anniversary '59 re-issue and there is a Strymon Flint set to '70's reverb in the loop. No other jiggery pokery is employed. This is the raw sound of the amp just as you would hear it in the room. No EQ, no effects in post. Just a Rode NT1-A and an SM57 on the Zilla cab with EVM 12L slightly off axis. Straight into a Presonus Studio 68C and Studio One.
I'm going for as honest a depiction of how awesome this amp sounds here. Hope you get a good idea of how it sounds. The second bit was done with the Sat switch off and it's slower paced.
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
32
views
Friedman JEL-20 demo: Channel 2 Pure Filth!
Dave Friedman's new amp, which has been garnering a lot of attention for its fantastic gain channel, is given a demo here and I'm switching to the main attraction: Channel 2
This is a 20 Watt Marshall inspired valve head which has a complement of 3 12AX7 and 2 EL84 valves in the pre-amp and power section respectively. 20 Watts is LOUD though. It's not a bedroom amp but in comparison to the Jake E Lee 100 Watt version, this one is actually useable outside stadia.
Jake E Lee is a fantastic guitarist who, to my shame, was unknown to me prior to this signature amp being released but having listed to Ozzy's 'Bark at the Moon', I can see why he is so revered.
So my demo features a Gibson Les Paul 1968 re-issue with Humbucker Alnico III pickups and I'm cutting to the chase and just going max on the channel. I didn't use the pull boost so rest assured, there is even more gain on tap but the pickups in the Les Paul aren't potted and I don't want to sound like a pig being slaughtered. I was using a Tone King Ironman II attenuator as well and a Strymon Flint reverb in the loop at the back of the amp. The presence at the back was set to noon.
I'm recording with an SM57 and Rode NT1-A on a Zilla cab with an EVM 12L and the mic is slightly off X axis.
Hopefully you get the idea that this amp is hugely versatile and the combination of foot switchable channels could be perfect for any style. Switch to the raging beast of channel 2 and you have everything.
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
21
views
Friedman JEL-20 demo: Channel 1 Plexi Clean
Dave Friedman's new amp, which has been garnering a lot of attention for its fantastic gain channel, is given a demo here but for this one, I'm sticking to the Plexi channel.
I'll try to give some idea that the amp isn't just a metal monster but actually a great amp for all styles.
This is a 20 Watt Marshall inspired valve head which has a complement of 3 12AX7 and 2 EL84 valves in the pre-amp and power section respectively. 20 Watts is LOUD though. It's not a bedroom amp but in comparison to the Jake E Lee 100 Watt version, this one is actually useable outside stadia.
Jake E Lee is a fantastic guitarist who, to my shame, was unknown to me prior to this signature amp being released but having listed to Ozzy's 'Bark at the Moon', I can see why he is so revered.
My demo can't really compete with the shredders and Metal Chuggers™ doing demos of this amp. There are great demos out there, so I thought I would do a part 1 with the amp featuring only the 'clean' channel: channel1.
It's not exactly Fender Twin clean but in comparison to the monster gain of channel 2 it can be described as the Plexi Channel. That is, the sound of an old '60's Marshall without master volume, made in the days where loud was loud and distortion could only be obtained by turning the amp up to apocalyptic levels. This amp in fact has 2 master volumes and 2 gains as it is a 2 channel amp but that gives you 2 completely different voicings available.
So my demo features firstly a Gibson Les Paul 1956 re-issue with P90 pickups and then a PRS Silver Sky. I run through the pickups of each and you can see in the video where the controls were set for each example. I was using a Tone King Ironman II attenuator as well and a Strymon Flint reverb in the loop at the back of the amp. The presence at the back was set to noon.
I'm recording with an SM57 and Rode NT1-A on a Zilla cab with an EVM 12L and the mic is slightly off X axis.
Hopefully you get the idea that this amp is hugely versatile and the Plexi channel could be perfect for any style. Foot switchable to the raging beast of channel 2 and you have everything.
Skip chapters as follows:
00:00 Intro
00:19 Gibson Les Paul R6 on neck pickup
02:40 Gibson Les Paul R6 in middle position
03:33 Gibson Les Paul R6 on bridge pickup
04:28 Gibson les Paul R6 on neck pickup again
05:10 Gibson les Paul R6 in middle position
05:29 Gibson les Paul R6 on bridge pickup
06:38 PRS Silver Sky all positions part 1
09:30 PRS Silver Sky all positions part 2
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
60
views
Strat Battle! Pitting the Silver Sky against a Fender
If John Mayer left Fender to use his Silver Sky model then surely there must be something about the PRS that Fender cannot do?
In this demo, I take a 2020 Lunar Ice Silver sky, a 2023 Moc Sand with a rosewood fingerboard and a 2014 Fender custom shop 60th anniversary '54 model and make a comparison.
Does the Silver Sky compete? Does the rosewood board sound 'darker' than a maple one?
Lots of interesting questions...
I was always told that a rosewood board would sound darker and more 'woody'. I was sort of sceptical really as a lot of information on the internet is just nonsense. So I am putting it to the test.
Bear in mind that any differences could be down to the setup or the pickups but in this case I have meticulously duplicated the factory set up of the rosewood board one (which was stock from the factory) on the maple board Lunar Ice, which need a set up after purchase as the previous owner had made it a floating tremolo. All pickup heights and string heights are identical and with fresh strings on all 2 guitars, it's interesting try them.
I'm using a Two Rock Classic Reverb and for the first round, straight in clean. For the next 2 I'm using an Origin Effects Revival drive for some very light dirt. I don't want to flood any subtle differences with distortion.
What do you think?
Can you hear the difference between the maple and rosewood? Is the Fender better or worse?
I am using 2 microphones on one 12" speaker of the Two rock 2x12" cab: a Rode NT1-A and an SM57 placed centre and to the left of the cone just off axis.
Chapter list for quick comparison:
00:00 Intro
00:16 Maple board Silver sky in position 5
01:01 Rosewood board Silver Sky in position 5
01:29 Maple neck Fender in position 5
02:01 Maple board Silver Sky in position 4
02:30 Rosewood board Silver Sky in position 4
02:58 Maple neck Fender in position 4
03:24 Maple board Silver Sky in position 3
03:47 Rosewood board Silver Sky in position 3
04:14 Maple neck Fender in position 3
04:39 Maple board Silver Sky in position 2
05:11 Rosewood board Silver Sky in position 2
05:38 Maple neck Fender in position 2
06:03 Maple board Silver Sky in position 1
06:34 Rosewood board Silver Sky in position 1
07:00 Maple neck Fender in position 1
07:27 Maple board Silver Sky in all 5 positions with Revival Drive
09:05 Rosewood board Silver Sky in all 5 positions with Revival Drive
10:39 Maple neck Fender in all 5 positions with Revival Drive
12:04 Maple board Silver Sky Final round
13:50 Rosewood board Silver Sky Final round
15:22 Maple neck Fender Final round
Check out my website for other stuff plus reviews of the gear.
www.gringopig.com
Please like and subscribe if you would like!
111
views
2017 Martin D-28 Re-imagined
This is a demo of a first year re-imagined Martin.
The re-imagined series is now what you get as a standard Martin but it was quite an upheaval in the model range, resulting in a new neck style and carve known as the modified low oval carve, open gear Grover tuners, an aged toner to the Sitka Spruce top and forward shifted X bracing.
These changes were first brought to the D-28 model and the year after applied to the rest of the range. If you have played a recent Martin you will be familiar with the neck carve. It's not what I would choose for electric but perfect for acoustic as it's more stressful on the hand anyway and the finger position benefits from support around the carve.
Previous V necks which still feature in the vintage recreations feel awful after a while due to the lack of support for the hand. They may be deeper at the biggest point but it's the sides that support the hand.
I like the carve on Martin guitars.
This was a used purchase: someone's daily player and it sounds really good. Open and full but even across the strings. It's got some nice rosewood too. Indian rosewood for the re-imagined.
My demo features a Rode NT1-A and SM57 on fretboard and behind the bridge and I have added a touch of 'small studio' reverb from a Lexicon plug-in in Studio One.
Check out my website for other stuff plus a round up of this guitar.
www.gringopig.com
Please like and subscribe if you would like!
4
views