When to PAY SOMEONE ELSE... Roof Sheathing my DIY Workshop Build
🔗 Samcraft Website: https://sam-craft.com 🔗 Full Workshop Build Playlist: https://www.youtube.com/playlist?list=PLxHrEOd7lzfE-lKgw0oW4-4yNr5mQTFzl 🔗 GP Force Field Weather System: https://buildgp.com/forcefield/ ⬇️ MORE LINKS BELOW ⬇️
🔷 TOOL LINKS 🔷
🔗 Sam's Tool Belt Rig: https://amzn.to/3tohai7
🔗 Forklift Safety Cage: https://amzn.to/3Nqoz7N
🔗 Paslode Cordless Framing Nailer: https://amzn.to/46U10fr
🔗 Rolling Scaffold: https://amzn.to/3RfsyGF
🔗 Workpro Clamps: https://amzn.to/46w5SWT
🔗 Little Giant Step Stool: https://amzn.to/3GfE4LJ
🔗 Craftsman Cordless Circular Saw: https://amzn.to/3FSK7Wy
🔗 Craftsman Cordless Impact Driver: https://amzn.to/3u8MCl7
🔗 Craftsman Cordless Miter Saw: https://amzn.to/47iaBwf
🔗 Sam's Hat: https://amzn.to/3UHbXvA
🔗 Laser Level & Detector: https://amzn.to/3QgypuI
🔷 OTHER VIDEOS 🔷
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT THE GEORGIA-PACIFIC FORCEFIELD WEATHER BARRIER SYSTEM 🔷
Georgia-Pacific continues to build on an enduring legacy of innovation with ForceField® Weather Barrier System. Dive into how the enhanced features of this integrated WRB sheathing system simplify wood-framed constructions. ForceField Weather Barrier System from Georgia-Pacific is an integrated WRB sheathing system designed for walls and sloped roofs on residential and multifamily structures. An engineered structural wood sheathing panel with an enhanced overlay that helps keep water out.
DETAILS:
Protect the full structure from walls to roofs
Install like standard OSB or plywood sheathing
Greater than 90% drainage efficiency*
Work with accessories to help keep structures dry and energy efficient
Ideal for residential, multifamily and light commercial construction
Available in three lengths to help installation move quickly
Meets Exposure 1 – OSB suitable for uses not permanently exposed to the weather
Physical Properties DOC PS 2, Exposure 1
Panel Grade DOC PS 2, 7/16 CAT
Water Resistive Barrier ICC ES AC 310, Meets/exceed requirements
Surface Bond of Overlay to Panel ASTM D5651, greater than 16psi
Water Penetration ASTM E331, Pass
Water Vapor Transmission ASTM E96 (Water Method), 2.8 perms
Air Permeance of Assembly ASTM E 2357, .0009 cfm/ft2@75 pa
Surface Burning Characteristics ASTM E84, Meets Class III
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I discuss the roof sheathing for my new workshop. I chose to install Georgia-Pacific ForceField Weather Barrier System for my roof. I also chose to pay for professionals to install it. Come with me as I talk about when it makes sense to pay someone to do work for you, the benefits of this roof sheathing product, and show you the results. Let's go!
#samcraft #workshopbuild #shopbuild @buildgp_wood @GeorgiaPacificPro #forcefield #gpforcefield #roofsheathing #roofing #sheathing #diyworkshopbuild
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
87
views
Double Top Plate & Roof Truss Preparations! // 20x32 Workshop Build
🔗 Samcraft Website: https://sam-craft.com 🔗 Full Workshop Build Playlist: https://www.youtube.com/playlist?list=PLxHrEOd7lzfE-lKgw0oW4-4yNr5mQTFzl 🔗 Sam's Tool Belt Rig: https://amzn.to/3tohai7 ⬇️ MORE LINKS BELOW ⬇️
🔷 TOOL LINKS 🔷
🔗 Paslode Cordless Framing Nailer: https://amzn.to/46U10fr
🔗 Rolling Scaffold: https://amzn.to/3RfsyGF
🔗 Simpson H1Z Rafter Brackets: https://amzn.to/3sZR317
🔗 SD Connector Screws: https://amzn.to/3N1qI9E
🔗 Workpro Clamps: https://amzn.to/46w5SWT
🔗 Little Giant Step Stool: https://amzn.to/3GfE4LJ
🔗 Craftsman Cordless Circular Saw: https://amzn.to/3FSK7Wy
🔗 Craftsman Cordless Impact Driver: https://amzn.to/3u8MCl7
🔗 Craftsman Cordless Miter Saw: https://amzn.to/47iaBwf
🔗 Sam's Hat: https://amzn.to/3UHbXvA
🔗 Laser Level & Detector: https://amzn.to/3QgypuI
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I install the double top plate on all my walls, and install the truss rafter brackets.
🔷 VIDEO CHAPTERS 🔷
#samcraft #workshopbuild #shopbuild
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
57
views
MAJOR STEP: Raising the Walls of my New Workshop!
🔗 Samcraft Website: https://sam-craft.com 🔗 Full Workshop Build Playlist: https://www.youtube.com/playlist?list=PLxHrEOd7lzfE-lKgw0oW4-4yNr5mQTFzl 🔗 Sam's Tool Belt Rig: https://amzn.to/3tohai7 ⬇️ MORE LINKS BELOW ⬇️
🔷 TOOL LINKS 🔷
🔗 Paslode Cordless Framing Nailer: https://amzn.to/46U10fr
🔗 Craftsman Cordless Circular Saw: https://amzn.to/3FSK7Wy
🔗 Craftsman Cordless Impact Driver: https://amzn.to/3u8MCl7
🔗 Craftsman Cordless Miter Saw: https://amzn.to/47iaBwf
🔗 Sam's Hat: https://amzn.to/3UHbXvA
🔗 Laser Level & Detector: https://amzn.to/3QgypuI
🔗 Milwaukee Torch Carbide Blade: https://amzn.to/40a5IDg
🔗 Diablo Carbide Blade: https://amzn.to/3sgnDeK
🔗 Concrete Mixer: https://www.lowes.com/pd/Kobalt-4-cu-ft-0-5-HP-Cement-Mixer/3591096
🔗 Concrete Beam Brackets (PB66Z): https://amzn.to/475XSgc
🔗 Concrete Tool Set: https://amzn.to/3SdnKCs
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video we raise the walls of the new workshop! I lift the framed walls into place myself and secure them with bracing as we work around lifting all the exterior walls.
🔷 VIDEO CHAPTERS 🔷
#samcraft #workshopbuild #shopbuild
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
79
views
Concrete Pour Day! DIY Pier Foundation for my new 20 x 32 Workshop!
🔗 Full Workshop Build Playlist: https://www.youtube.com/playlist?list=PLxHrEOd7lzfE-lKgw0oW4-4yNr5mQTFzl 🔗 Sam's Tool Belt Rig: https://amzn.to/3tohai7 🔗 Drywall T Square with Holes: https://amzn.to/45Lmz0q ⬇️ MORE LINKS BELOW ⬇️
🔷 TOOL LINKS 🔷
🔗 MilwaukeeTorch Carbide Blade: https://amzn.to/40a5IDg
🔗 Diablo Carbide Blade: https://amzn.to/3sgnDeK
🔗 Concrete Mixer: https://www.lowes.com/pd/Kobalt-4-cu-ft-0-5-HP-Cement-Mixer/3591096
🔗 Concrete Beam Brackets (PB66Z): https://amzn.to/475XSgc
🔗 Sam's Hat: https://amzn.to/3UHbXvA
🔗 Pink Rebar - Owens Corning PINKBAR+: https://www.lowes.com/pd/Owens-Corning/5013333093
🔗 Concrete Tool Set: https://amzn.to/3SdnKCs
🔗 Laser Level & Detector: https://amzn.to/3QgypuI
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I cut the cardboard concrete tube forms level and mix up concrete to pour my footings and concrete piers for my workshop foundation! I also test out fiberglass rebar and compare it to steel rebar.
#samcraft #workshopbuild #shopbuild
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
127
views
ULTIMATE REVIEW: xTool S1 40w + Riser Base
🔗 My xTool Test Files and Templates: https://sam-craft.com/product/xtool-creative-space-laser-test-file/ 🔗 xTool S1: https://www.xtool.com/products/xtool-s1-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer 🔗 xTool Riser Base: https://www.xtool.com/products/xtool-s1-riser-base?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44125475373295 ⬇️ MORE LINKS BELOW ⬇️
🔗 ULTIMATE S1 ALL IN ONE KIT: https://www.xtool.com/products/xtool-s1-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44133277663471
🔗 S1 Automatic Conveyor Feeder: https://www.xtool.com/products/xtool-s1-automatic-conveyor-feeder?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44123290796271
🔗 S1 Fire Safety Set: https://www.xtool.com/products/xtool-fire-safety-set-for-s1-auto-fire-detection-fire-extinguishing?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44133175886063
🔗 1064nm Laser Head for METAL: https://www.xtool.com/products/xtool-s1-infrared-module?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44114442354927
🔗 S1 Rotary: https://www.xtool.com/products/xtool-ra2-pro-for-xtool-s1?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44133187387631
🔗 Check out xTool and Jackery Combo Units Here: https://www.xtool.com/products/xtool-f1-x-jackery-power-station?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44085666873583
🔗 Where I Get All My Laser Files & MUCH MORE: https://www.creativefabrica.com/product/wooden-kids-toy-airplane-svg/ref/4783395
🔗 Laser Wood and Acrylic! MakerStock (with a Discount Code for You): https://makerstock.com/discount/craft10
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 xTool F1: 🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool F1 Slide Extension Table: https://www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool P2 🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool D1 🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I show you the latest laser from @xtool -- the S1 40 watt diode laser.
#samcraft #laserengraving #xtools1
VIDEO CHAPTERS
0:00 - Intro
0:42 - Cinematic Dance Party
1:06 - Video Disclaimer
1:48 - Assembly: xTool S1 and Riser Base
3:26 - Machine Overview & Features
4:24 - Safety Features of the xTool S1
5:34 - ALWAYS Run Material Tests!
6:02 - Slate Engraving Settings
6:34 - Baltic Birch Plywood Cutting Settings
7:17 - Wood Engraving Settings
7:50 - Acrylic Cutting Settings
8:20 - Acrylic Engraving Settings
9:18 - Laserable Leatherette Settings
10:13 - Anodized Aluminum Settings
10:47 - Stainless Steel Settings
11:36 - How to Use Twin-Point Positioning with the xTool S1
14:55 - Noise Level of the xTool S1
15:38 - Riser Base for Tall Project Engraving
16:35 - What I DO NOT Like About the xTool S1
18:20 - xTool S1 Honeycomb Bed Problems
19:20 - Fume Extraction Pros and Cons
20:03 - One Last Complaint / My Wish for the xTool S1
21:26 - Should You Buy the xTool S1?
21:44 - Thanks for Watching!
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
246
views
1
comment
Obligatory Teaser Video [ xTool S1 ]
🔗 Pre-Launch Link: https://dataaccess.mblock.cc/t/B4 🔗 xTool Official Store: https://www.xtool.com/?ref=samcraft&utm_medium=5306&utm_source=influencer 🔗 My xTool Test Files and Templates: https://sam-craft.com ⬇️ MORE LINKS BELOW ⬇️
🔗 Check out xTool and Jackery Combo Units Here: https://www.xtool.com/products/xtool-f1-x-jackery-power-station?ref=samcraft&utm_medium=5306&utm_source=influencer&variant=44085666873583
🔗 Where I Get All My Laser Files & MUCH MORE: https://www.creativefabrica.com/product/wooden-kids-toy-airplane-svg/ref/4783395
🔗 Laser Wood and Acrylic! MakerStock (with a Discount Code for You): https://makerstock.com/discount/craft10
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 xTool F1: 🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool F1 Slide Extension Table: https://www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool P2 🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool D1 🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
#samcraft #laserengraving #xtools1 @xtool
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
123
views
Batter Boards & Foundation Layout - 20 x 32 Workshop Build
🔗 Full Workshop Build Playlist: https://www.youtube.com/playlist?list=PLxHrEOd7lzfE-lKgw0oW4-4yNr5mQTFzl 🔗 Sam's Tool Belt Rig: https://amzn.to/3tohai7 🔗 Laser Level & Detector: https://amzn.to/3QgypuI 🔗 @RRBuildings Layout & Batter Board Video: https://youtu.be/8m-G9qrDpng?si=WcRcnxe9o3srUWav ⬇️ MORE LINKS BELOW ⬇️
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
#samcraft #workshopbuild #shopbuild
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
44
views
FINALLY! True Cable Management: Creality Falcon2 40w Laser Cutter
🔗 Official Store: https://store.creality.com/products/falcon2-40w-laser-engraver-cutter?aid=ZBUS Code: FN40W (20% Off, cannot be used in conjunction with page events, but can be used normally after the event) 🔗 Laser on Amazon: https://amzn.to/3ENIrNC Code: 20FALCON 🔗 All my Laser Files, Templates and More: https://sam-craft.com ⬇️ MORE LINKS BELOW ⬇️
🔗 Toy Plane Files (& MUCH MORE): https://www.creativefabrica.com/product/wooden-kids-toy-airplane-svg/ref/4783395
🔗 Laser Wood and Acrylic! MakerStock (with a Discount Code for You): https://makerstock.com/discount/craft10
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
🔷 TOOL INFO FROM VENDOR 🔷
Creality Laser Engraver 240W, High Power Falcon2 Laser Engraving Machine, 40W Output DIY Laser Cutter and Engraver Machine for Metal and Wood, Paper, Acrylic, Glass, Leather
【Powerful 40W Laser Output】Falcon2 laser engraving machine has an Output Power of up to 40W and a Machine Power of 120W. It can cut 20mm cork and 0.15mm stainless steelsheet with one pass. It can directly carve colored patterns on mirror stainless steel, ceramics, and opaque glass.
【25000mm/min Cutting Speed】The laser cutting machine has an ultra fast cutting speed of 25000mm/min, greatly improving productivity. This laser engraver comes standard with automatic integrated air assist, greatly improving cutting ability and quality, allowing you to get things done with less hassle.
【Ultra-fine Carving and Cutting】The all aluminum alloy anodized structure enables the laser cutter module of the engraving machine to have excellent motion stability, making the machine more durable and improving the engraving accuracy. You can obtain higher precision, more realistic, and vivid carving artworks.
【Five Safety Protections】This laser engraving machine is equipped with advanced safety features, flame detector, bidirectional limit switch, safety lock, emergency stop button, and laser detection cover. Minimize accidental operation and ensure safety and reliability.
【Convenient Offline Operation】This laser engraver supports offline creation. You can simply insert a TFcard and freely create it anytime, anywhere.And the laser engraver for metal can be dynamically previewed offline, allowing you to accurately locate and adjust without connecting to a computer.
#creality #laserengraving #samcraft
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
312
views
Consider THIS to GROW Your BUSINESS! Affordable heat presses for hats and more!
🔗 All my Laser Files, Templates and More: https://sam-craft.com 🔗 Hat Press: https://s.vevor.com/bfQsaP 🔗 Heat Press: https://s.vevor.com/bfQvu8 [ 5% off code: DISCOUNT23 ] 🔗 Matt's Channel: https://www.youtube.com/@laserengravingwithmatt7833 ⬇️ MORE LINKS BELOW ⬇️
🔗 Trucker Style Hats: https://amzn.to/3RoWa4S
🔗 Heat Press Pillow Pads: https://amzn.to/48kK0Ab
🔗 Laserable Leatherette: https://browse.jdsindustries.com/main.php?r=frontEnd&view=front&jds-category1=16&jds-category1-desc=Laserable+Leatherette
🔗 Laser Wood and Acrylic! MakerStock (with a Discount Code for You): https://makerstock.com/discount/craft10
🔗 ChewBarka Metal Tags: https://chewbarka.com/
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 xTool F1: 🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool F1 Slide Extension Table: https://www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool P2 🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool D1 🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I show you two new tools that will help you increase your product lineup and expand your small business with laser engraving! I have a Vevor hat press and Vevor heat press to show you. I use the xTool P2 laser to engrave and cut laserable leatherette from JDS Industries and make custom patches. I make trucker hats, patches for baseball caps, drink carriers, tote bags, craft bags, and more!
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
0:45 - Vevor Hat Press Overview
2:06 - How to Adjust Temp and Timer of the Heat Presses
2:32 - How to Operate the Heat Press Machines
4:19 - What is Laserable Leatherette?
4:55 - Where to Buy Blank Hats & Other Items
6:46 - Engraving Patches with the xTool P2 55w CO2 Laser
8:22 - Using the Heat Press to Apply Patches
11:37 - Using the Hat Press to Make Custom Leather Patch Hats
14:43 - I'm a Hat Model Now?
15:20 - Are Hat Presses and Heat Presses Worth it for Your Small Business?
🔷 TOOL INFO FROM VENDOR 🔷
VEVOR Heat Press 6x3.75Inch Curved Element Hat Press Clamshell Design Heat Press for Hats Rigid Steel Frame No Stick Digital LCD Timer and Temperature Control (6x3.75Inch Clamshell Design)
3.5" x 5.5" Hat Press Machine
LCD Panel & Desktop Design & Superior Performance
Equipped with an accurate digital controller and an automatic time regulator, this amazing hat heat press provides you an excellent and colorful transfer effect. Using the die-casting aluminum heating platen as the material, its service life can last up to 12,000 hours. Especially suitable for advertising, gifts, promotional activities, personalized items and so on.
Aluminum Heating Plate
Digital Timer and Temp Control
User-friendly Clam shell
Easy to Use
Efficient Printing
VEVOR Heat Press Machine 15 x 15 in Sublimation Printer Transfer for DIY T-shirt
15" x 15" Heat Press Machine
Fast Heating & One Station & Efficient Transfer
This Industrial-quality clamshell heat press adopts the latest heating technology and two-layer insulation pads to improve the transfer performance. The stability has also been enhanced with a high precision temperature sensor and accurate time controller, widely used for home decorations, customized gifts, and holiday celebrations.
15 x 15 Heat Press
Digital Control Board
Teflon Insulation Coating
Adjustable Pressure Knob
Easy to Use
#laserengraving #samcraft #vevor #vevordiyproject #diyproject
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
510
views
ULTIMATE FILE KIT & How To Make Templates for Your xTool w/ xTool Creative Space!
🔗 Full Template File Kit: https://sam-craft.com/product/ultimate-template-kit-xtool-f1-slide-extension/ 🔗 All my Laser Files, Templates and More: https://sam-craft.com 🔗 My Pen & Pencil Template Video: https://youtu.be/pdTw0lyn_wo ⬇️ MORE LINKS BELOW ⬇️
🔗 MakerStock with a Discount Code for You: https://makerstock.com/discount/craft10
🔗 ChewBarka Metal Tags: https://chewbarka.com/
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 xTool F1: 🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool F1 Slide Extension Table: https://www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool P2 🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 xTool D1 🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer 🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I take you through the creation process of making custom templates for your xTool F1 with Slide Extension table. I also show you what I call the Ultimate Template Kit for the xTool F1 and walk you through the steps to use and customize it.
🔷 VIDEO CHAPTERS 🔷
0:00 - Fancy McFance Pants Intro
1:38 - The Reason for Making Templates
2:00 - What's in my Ultimate Template Kit
2:39 - What makes my file different from others?
3:28 - Pen and Pencil Template
8:13 - Drink Coaster Template
11:07 - Military Dog Tag Template
14:20 - How to Make Your Own Templates
21:57 - Business Card Template
23:14 - Gridboard Template
25:04 - Links Below! Thanks for Watching
#laserengraving #samcraft #xtoolf1
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
177
views
When to Get a Fiber Laser - ComMarker B4 20w
🔗 ComMarker B4 20 watt Fiber Laser: https://amzn.to/3Qzq2v6 🔗 Laser Files & More on my Website: https://sam-craft.com 🔗 Color Engraving Slate: https://youtu.be/x_aJdGcUB9c ⬇️ MORE LINKS BELOW ⬇️
🔗 Slate Coasters: https://amzn.to/3Qy7eMC
🔗 Terracotta Dishes: https://amzn.to/3Ow9yRP
🔗 Stainless Steel Business Cards (THICK): https://amzn.to/47tgEin
🔗 Anodized Aluminum Business Cards (THICK): https://amzn.to/3OOKDdi
🔗 Metal Military & Pet Tags: https://amzn.to/45jF8st
🔗 All my Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 MakerStock with a Discount Code for You: https://makerstock.com/discount/craft10
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 xTool Test Files on my Website: https://sam-craft.com/product/xtool-creative-space-laser-test-file/
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I show you my new fiber laser, the Commarker B4 20w fiber laser. I have used this fiber laser for over two months in my workshop and for my small laser engraving business. This laser is great and has performed perfectly for my needs. I also answer common questions like:
When should I you get a fiber laser?
Who are fiber lasers for?
How much of a difference does a fiber laser make?
Is a fiber laser worth the cost?
What can a fiber laser engrave?
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
0:25 - Overly Cinematic Footage of a Laser
1:31 - About the ComMarker B4 20w Fiber Laser
2:46 - Real Time Material Tests
7:00 - Colored Engravings on Slate from a Fiber Laser
7:47 - Engraving Terracotta with a Fiber Laser
8:29 - Leatherette Patches
9:30 - Silicone Drink Coasters
10:32 - THICK Metal Business Cards
11:50 - Metal Military & Pet Tags
12:23 - When Does a Stationary Fiber Laser Make Sense?
14:51 - PROS & CONS of the ComMarker B4 Fiber Laser
17:06 - Lightburn vs. Easy CAD for the ComMarker B4 Fiber Laser
19:02 - Who Should Buy a Fiber Laser?
20:38 - Thanks for Watching & Supporting My Small Business!
#laserengraving #samcraft #commarker
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
377
views
A BIG SELLER: Engraved Pens & Pencils! Made on the xTool F1 w/ Slide Extension
🔗 Pen/Pencil Template File: https://sam-craft.com/product/xtool-f1-pen-pencil-template/ 🔗 F1 Drink Coaster Template: https://sam-craft.com/product/xtool-f1-drink-coaster-template-file/ 🔗 xTool Test Files on my Website: https://sam-craft.com/product/xtool-creative-space-laser-test-file/ 🔗 Slide Extension Table: https://www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&utm_medium=5306&utm_source=influencer ⬇️ MORE LINKS BELOW ⬇️
xTool F1
🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 MakerStock with a Discount Code for You: https://makerstock.com/discount/craft10 🔗 Engraving in Color Video: https://youtu.be/x_aJdGcUB9c 🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2) 🔗 Free 100mm Square Test Grid: https://sam-craft.com 🔗 Digital Calipers: https://amzn.to/3MXpfk1 🔗 Digital Angle Finder: https://amzn.to/43NkLDj 🔗 1-2-3 Blocks: https://amzn.to/3qu7122
xTool P2
🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
xTool D1
🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I take you through the creation process of making a template for engraving pens or pencils. Customized pens are a big seller. Laser engraved pencils are great for back to school and business promotional items. Let's go!
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
0:26 - It's Prime Time for This
0:53 - Featuring the xTool F1 with Slide Extension
1:13 - File Walk Through
1:45 - Step One: File Info
2:46 - Step Two: Make the Panels
7:02 - Step Three: Cut the Template
10:15 - Step Four: Glue & Sand Template
11:51 - How to Place Designs on the Template
16:21 - Running the First Batch of Pencils
16:44 - Tips and Tricks with the Template
18:10 - Thanks for Watching & Supporting My Small Business
#laserengraving #samcraft #xtoolf1
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
212
views
I Guess It Wasn't a Total Failure... Acrylic French Cleat Tool Holder
🔗 Check Out All My Laser Files on my Website: https://sam-craft.com 🔗 Weld-On 3 Acrylic Cement: https://amzn.to/3JszM5F 🔗 MakerStock with a Discount Code for You: https://makerstock.com/discount/craft10 ⬇️ MORE LINKS BELOW ⬇️
🔷 xTool P2 🔷
🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I try to make some french cleat cordless tool holders out of acrylic on my xTool P2 CO2 laser. I mess things up, have some hiccups, but still learn and that's what it's all about.
🔷 VIDEO CHAPTERS 🔷
#frenchcleat #samcraft #xtoolp2
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
51
views
Batching Out Coasters with the xTool F1 Feat. Slide Extension Table
🔗 Coaster Template: https://sam-craft.com/product/xtool-f1-drink-coaster-template-file/ 🔗 xTool Test Files on my Website: https://sam-craft.com/product/xtool-creative-space-laser-test-file/ 🔗 Engraving in Color Video: https://youtu.be/x_aJdGcUB9c 🔗 Slide Extension Table: https://www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&utm_medium=5306&utm_source=influencer ⬇️ MORE LINKS BELOW ⬇️
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2) 🔗 Free 100mm Square Test Grid: https://sam-craft.com 🔗 Digital Calipers: https://amzn.to/3MXpfk1 🔗 Digital Angle Finder: https://amzn.to/43NkLDj 🔗 1-2-3 Blocks: https://amzn.to/3qu7122
xTool F1
🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
xTool P2
🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
xTool D1
🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I take you through the creation process of making a drink coaster template for the xTool F1 slide extension table. This coaster template is key for achieving accurate results and producing the best quality products over and over. I also show you how to engrave coasters in color!
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
0:33 - What is a Coaster Template?
0:46 - Where to get the template
1:06 - Before you begin...
2:14 - Clamping the template to the slide extension
2:56 - File walk through in xTool Creative Space
6:17 - Engraving the template
7:58 - Proving the template's accuracy
10:25 - Using the template file for designing
12:09 - Setting material thickness with the xTool F1 Slide Extension
13:27 - Running a batch of drink coasters
15:42 - Final results & thoughts of the template
#laserengraving #samcraft #xtoolf1
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
266
views
Any Laser Can Do This! Colored Slate Engravings Feat. xTool F1
🔗 Free File Download: https://sam-craft.com/product/colored-slate-free-file/ 🔗 My xTool Test File: https://sam-craft.com/product/xtool-creative-space-laser-test-file/ 🔗 xTool Test File on Etsy: https://www.etsy.com/shop/SamcraftStore 🔗 Lightburn Version Test File Package: https://sam-craft.com/product/complete-laser-test-package-engraving-cutting-lightburn/
⬇️ MORE LINKS BELOW ⬇️
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🎉 xTool FATHER'S DAY SPECIAL SALE!!!🎉
xTool P2 - The Smartest CO2 Laser Cutter(Save $$$ this Father's Day):
🇺🇸 US: https://www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&utm_medium=5306&utm_source=influencer
xTool F1-Fastest Laser For Craft Show DIY(Save $$$ this Father's Day):
🇺🇸 US: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
xTool D1 Pro - Cash-in Laser Machine(Save $$$ this Father's Day):
🇺🇸 US: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer
🇬🇧 UK: https://uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I ...
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
#laserengraving #samcraft #xtoolp2
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
331
views
1
comment
xTool P2 Lens & Mirror Cleaning - COMPLETE WALK THROUGH
🔗 xTool Test File on my Website: https://sam-craft.com/product/xtool-creative-space-laser-test-file/ 🔗 xTool Test File on Etsy: https://www.etsy.com/shop/SamcraftStore 🔗 Lightburn Version Test File Package: https://sam-craft.com/product/complete-laser-test-package-engraving-cutting-lightburn/ 🔗 Foam Tipped Swabs: https://amzn.to/45J1xRa 🔗Official How To from xTool: https://support.xtool.com/hc/en-us/articles/14646053336855-Clean-the-P2-laser-lenses-Video- 🔗 xTool P2 Desktop CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer 🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer 🔗 xTool D1 Pro: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer ⬇️ MORE LINKS BELOW ⬇️
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I take you step by step through the process of cleaning the lens and mirrors of the xTool P2 55 watt desktop CO2 laser. This is a task that should be performed daily before you use your laser. Dirty lenses or mirrors will cause your machine's performance to dwindle. This will result in bad quality engravings or poor cutting performance. What causes the xTool P2 to not cut as well as before? You guessed it, dirty mirrors and lens!
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
0:45 - Tools & Supplies Needed
1:11 - How Long Does It Take to Clean the Lens & Mirrors?
1:25 - How Often Should I Clean the Lens and Mirrors on my P2 Laser?
1:56 - How to Clean the Lens and Mirrors of the xTool P2 55w CO2 Laser
13:37 - Closing Thoughts & Thanks
#laserengraving #samcraft #xtoolp2
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
220
views
The ONLY Test File Your xTool will Need | xTool Creative Space | xTool P2 CO2 Laser Tests
🔗 xTool File on my Website: https://sam-craft.com/product/xtool-creative-space-laser-test-file/ 🔗 xTool File on Etsy: https://www.etsy.com/shop/SamcraftStore 🔗 Lightburn Version File Package: https://sam-craft.com/product/complete-laser-test-package-engraving-cutting-lightburn/ 🔗 xTool D1 Pro: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft&utm_medium=5306&utm_source=influencer 🔗 xTool P2 Desktop CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer 🔗 xTool F1 Dual Diode & IR Laser: https://www.xtool.com/products/xtool-f1?ref=samcraft&utm_medium=5306&utm_source=influencer ⬇️ MORE LINKS BELOW ⬇️
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I share a new file created just for xTool Creative Space and that is compatible with all xTool lasers. This is the only laser test file you need for your xtool laser!
🔷 VIDEO CHAPTERS 🔷
0:00 - Intro
1:11 - File Introduction
5:01 - Engraving Test Walk Through
11:30 - Cutting Test Walk Through
13:18 - Grayscale Test Walk Through
14:33 - Test Results
23:20 - Final Overview and Other Info
#laserengraving #samcraft #alibaba
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
359
views
Risking Big Money on Bulk Orders from Alibaba... NOT GOOD!
⚙️ Get Your French Cleat Holders & Laser Test Files from Me: https://sam-craft.com 🛒 Samcraft Store on Etsy: https://www.etsy.com/shop/SamcraftStore 🔗 Exact Coasters I Ordered: https://www.alibaba.com/product-detail/4-inches-in-diameter-and-1_1600576381112.html?spm=a2700.shop_plgr.41413.5.7b2450c24ixbaz 🔗 The Coasters I Normally Got from Amazon: https://amzn.to/3DNvXDl ⬇️ MORE LINKS BELOW ⬇️
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: https://youtu.be/If8aJpy1Mn0
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I bring you through my story of risking $1,200 and nearly 6 months on bulk ordering of slate drink coasters for engraving and how it turned out. I waited nearly 6 months for this to finally come to a resolution, and it's not that great. Will I ever order from Alibaba again? I'm not sure...
🔷 VIDEO CHAPTERS 🔷
#laserengraving #samcraft #alibaba
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
84
views
One Holder, Multiple Tools! French Cleat Cordless Tool Holder [Universal Fit]
🔗 Get Your French Cleat Holders Here: https://sam-craft.com 🔗 Samcraft on Etsy: https://www.etsy.com/shop/SamcraftStore ⬇️ MORE LINKS BELOW ⬇️
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I show you my new product, the universal french cleat cordless tool mount! Made from 1/4" (6mm) Baltic birch plywood and laser cut in my workshop, this french cleat tool holder is very strong and made to last! Compatible with most all hand grip tools, this one holder can organize your cordless drill, impact driver, oscillating tool, flashlight, cordless brad nailer, and even hold your heavy impact wrench! Tested with Craftsman, Worx, and DeWalt cordless tools. @craftsman @WorxUS
#frenchcleat #samcraft #cordlesstools
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
56
views
HOW TO: Product Research, Prototyping, & Pricing Formula!
🔗 My Website: http://sam-craft.com 🔗 Samcraft on Etsy: https://www.etsy.com/shop/SamcraftStore 🔗 Best Etsy SEO Tool: https://salesamurai.io/ COUPON CODE: samcraft ⬇️ MORE LINKS BELOW ⬇️
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔗 All My Laser Engraving Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
#smallbusinessideas #samcraft #businesstips
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
28
views
1
comment
GOOD & BAD: Gweike Cloud Pro II 50w CO2 Desktop Laser Review
🔗 Samcraft Cutting Test File: https://sam-craft.com 🔗 Gweike Laser Cutters: https://www.gweikecloud.com/collections/machine?ref=samcraft 🔗 Gweike Website: https://www.gweikecloud.com/?ref=samcraft 🔷 $200 Coupon Code: Samcraft 200
⬇️ MORE LINKS BELOW ⬇️
🔷 Other Useful Videos & Links🔷
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All my Laser Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔗 My Atomstack M4 Review: https://youtu.be/sc-ru_-2R4s
🔗 My Ortur 1 Year Review: https://youtu.be/4uvodYYJe8Y
🔷 xTool Links 🔷
🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 xTool D1 Grid Board: https://sam-craft.com/product/xtool-d1-grid-board
🔗 xTool D1 Pro 20w: https://amzn.to/3EKPyH2
🔗 xTool Honeycomb: https://amzn.to/3kESNc5
🔗 xTool Air Assist: https://amzn.to/3EOBSKR
🔗 xTool Enclosure: https://amzn.to/3EOPeXK
🔷 Genmitsu Links 🔷
🔗 My Genmitsu Z5-1 Video Review: https://youtu.be/dqF7fbCeRcA
🔗 Check out the Z5-1 on SainSmart: http://shrsl.com/3z1q5
🔗 Z5-1 on Amazon: https://amzn.to/3YPTdKS
🔗 See All of Genmitsu's Lasers: http://shrsl.com/3z1q6
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I review the Gweike Cloud Pro II 50 watt CO2 laser. I cover the good and the bad parts of the machine including packaging and assembly, learning curves, material tests and use cases, and the things wrong with the machine.
🔷 INFO FROM GWEIKE 🔷
Gweike cloud Laser Cutter & Engraver with Rotary CO2 (50W) Pro II
5MP camera, preview design and visually position it on the material.
Silent fan and water pump, decibel≤70dB.
The CO2 laser cutter supports Live Preview & Image Extraction.
100% pre-installed 1-step fast assembly.
WIFI/USB/Internet cable connection.
Lightburn/Gweikecloud online/Gweike offline control.
All modules and major components are made of high-strength metal.
Laser System
Laser Power 50W
Laser Type CO₂ Glass Laser Tube
Lifespan 10000h
Safety Guard Class I (FDA Certified)
Work Area
Work Table Area 20.08" (510mm)*11.8" (300mm)
Max. Workpiece Height(without honeycomb tray) 2''(51mm)
Work Table Surface Black (Special surface finishing technique helps reduce burn marks or discoloration)
Materials Processing
Max. Cutting Depth 0.59''(15mm) Basswood
Max. Carving Speed 600mm/s
Carving Precision 0.001” (0.025mm)
Noise Rating ≤70dB
Rotary Device
Rotary Engraving diameter 30mm-74mm
Rotary Engraving Length ≤245mm
AI Camera Information
Focus Mode AI Visual AF/Material Recognition AF/Material Set-up AF
Camera High-resolution Ultra-wide Camera
Number of Pixels (Effective) 5MP
Visible Area 19.29'' x 11.42''
Positioning AI Visual Positioning Error range ≤ 2mm
Software Requirements
Operating Systems Windows/macOS
Control Software Gweikecloud Web Based, Gweikecloud Offline, Lightburn
Connection / Transmission Wi-Fi, USB, Ethernet
Supported File Type SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc.
Design Software AutoCAD, Solidworks, Inkscape, CorelDRAW, PowerPoint, Illustrator, Photoshop, Google AutoDraw, etc.
Environmental Requirement
Power AC 110-220V±10%,50-60Hz
Work Consumption (without fan) 550W
Non-operating Temperature 0~45°C
Relative Humidity 5~90°C
Operating Ambient Temperature 0~35°C
Weight & Dimensions
Processing Area 20.08" (510mm)*11.8" (300mm)
Machine Dimensions 38.2"*22.2"*9.2" (970mm*565mm*234.5mm)
Weight 45.6kg
Supported Accessories
Cameras: 5 MP ultra-wide-angle camera wide angle & macro
Full autofocus
Water Chiller
Dual high-efficiency internal LED strips
#laserengraving #samcraft #gweikelaser @gweikecloud4178
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
115
views
Faded Edges with Laser Engravings? TRY THIS FIRST
🔗 Plans & Laser Cut Files: http://sam-craft.com 🔗 xTool D1 Pro Gridboard: https://sam-craft.com/product/xtool-d1-grid-board/ 🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC 🔗 Focusing Video: https://youtu.be/HzNXC6Ognlg 🔗 xTool Website: https://www.xtool.com/?ref=samcraft&utm_medium=null&utm_source=influencer ⬇️ MORE LINKS BELOW ⬇️
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All my Laser Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 My Atomstack M4 Review: https://youtu.be/sc-ru_-2R4s
🔗 My Ortur 1 Year Review: https://youtu.be/4uvodYYJe8Y
🔷 xTool Amazon Links 🔷
🔗 xTool D1 Pro 20w: https://amzn.to/3EKPyH2
🔗 xTool Honeycomb: https://amzn.to/3kESNc5
🔗 xTool Air Assist: https://amzn.to/3EOBSKR
🔗 xTool Enclosure: https://amzn.to/3EOPeXK
🔷 xTool Website Links 🔷
US Store:
Store-wide Time-Limited Sales - Ends on Mar 21st (PT) - Up to $1362 (45%) Off on machines! (No code needed)
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 Landing page: https://www.xtool.com/pages/st-patricks-day-sale?ref=KgZ-ihT7Ehq2vm&utm_medium=null&utm_source=influencer
UK Store:
🔗 xTool UK St. Patrick's Day Sale: https://uk.xtool.com/pages/st-patricks-day-sale?ref=KgZ-ihT7Ehq2vm&utm_medium=null&utm_source=influencer
8th Mar. - 22nd Mar. Up to £1,300 (35%) Off on machines! (No code needed)
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
Are you having issues with your engravings having faded edges or missing alignment? How about unfocused engravings or blurry edges? If so, this video may have your solution! Today on Samcraft I talk about what Overscanning does and why the Xtool needs overscanning!
#laserengraving #samcraft #xtool
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
83
views
NEW: Genmitsu Z5-1 Metal Laser Engraver / 1064nm Galvo Laser Package
🔗 Check out the Z5-1 on SainSmart: http://shrsl.com/3z1q5 🔗 Z5-1 on Amazon: https://amzn.to/3YPTdKS 🔗 See All of Genmitsu's Lasers: http://shrsl.com/3z1q6 🔗 My Website & Laser Files: http://sam-craft.com/ 🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2) ⬇️ MORE LINKS BELOW ⬇️
🔗 All my Laser Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔷 PRODUCT INFO & LINKS 🔷
The following are the main features of Z5-1:
➡️ Metal & Plastic Marking: Built-in 1064 nm infrared wavelength laser, the Z5-1 can process all types of metal (from tin to titanium). Breaking the material limitation of other laser engravers, and no damage to the materials.
➡️ Precise & Incredible Speed: With up to 10,000 mm/s marking speed, 0.001mm spot, and 4K precision, the Z5-1 can achieve perfect image reproduction.
➡️ Compact Size: Unlike bulky traditional industrial fiber engravers, the Z5-1 is only 4.3kg(9.5lb). It is the perfect tool for creating customized products for your business or personal use on daily supplies, shop products, and art creation.
➡️ Dual Preview Modes: Z5-1 adopts Fiber Laser design solution so that you can see the result before engraving, and adjust your position on the fly. You can preview the overall pattern position or pattern outline. No more frustration with the unexpected position marked on the object.
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
Today on Samcraft I put the new Genmitsu Z5-1 Laser Engraver to the test. It is advertised as a metal engraver, but can it really engrave into metal? Let's find out!
🔷 VIDEO CHAPTERS 🔷
0:00 - Introduction
0:34 - Overly Awesome Video Segment
1:14 - Packaging & Assembly
1:30 - Tons of Options & Configs
2:52 - Would You Look at That
4:36 - Focused by Powered Lift!
5:10 - Build Quality: One Tough Cookie
5:37 - Custom Grid Board on a Z5-1 Laser
6:08 - The Best Thing About the Z5-1 Laser
7:27 - What is the Max Z Height of the Z5-1 Laser?
9:04 - How Sturdy is the Z5-1 Laser?
9:29 - Tech Specs
9:55 - Notable Features & Machine Tour
11:21 - Max Engraving Size of the Z5-1
11:52 - Engraving Test Results
15:03 - How I Use the Z5-1 in Small Business
15:40 - Problems with the Genmitsu Z5-1 Laser
16:38 - Is the Genmitsu Z5-1 Lightburn Compatible?
17:43 - Closing Thoughts, Links & Thanks!
#laserengraving #genmitsu #samcraft
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
107
views
Do This BEFORE You Laser Cut ANYTHING
🔗 Samcraft Cutting Test File: https://sam-craft.com/product/laser-cutting-test-file-mm-s/ 🔗 Other Plans & Laser Cut Files: http://sam-craft.com 🔗 xTool D1 Grid Board: https://sam-craft.com/product/xtool-d1-grid-board/ 🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC ⬇️ MORE LINKS BELOW ⬇️
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All my Laser Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 My Atomstack M4 Review: https://youtu.be/sc-ru_-2R4s
🔗 My Ortur 1 Year Review: https://youtu.be/4uvodYYJe8Y
🔷 xTool Amazon Links 🔷
🔗 xTool D1 Pro 20w: https://amzn.to/3EKPyH2
🔗 xTool Honeycomb: https://amzn.to/3kESNc5
🔗 xTool Air Assist: https://amzn.to/3EOBSKR
🔗 xTool Enclosure: https://amzn.to/3EOPeXK
🔷 xTool Website Links 🔷
🔗 xTool Website: https://www.xtool.com/?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 NEW xTool P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 xTool UK Store: https://uk.xtool.com/?ref=samcraft&utm_medium=null&utm_source=influencer
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I answer common questions about cutting test files with laser engravers. What are cutting tests? When do you use cutting tests? How do you run a cutting test? And many more! I also show you my custom designed cutting test that is available for sale on my website https://sam-craft.com
#laserengraving #samcraft #lightburn
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
85
views
Customizable! xTool D1 Pro Grid Board Template
🔗 xTool D1 Pro Gridboard: https://sam-craft.com/product/xtool-d1-grid-board/ 🔗 Plans & Laser Cut Files: http://sam-craft.com 🔗 All my xTool Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC 🔗 xTool Website: https://www.xtool.com/?ref=samcraft&utm_medium=null&utm_source=influencer ⬇️ MORE LINKS BELOW ⬇️
🔗 REAL Laser Safety Glasses: https://amzn.to/3YlhAAN (Diode & Infrared) https://amzn.to/3FtkbjP (CO2)
🔗 All my Laser Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Make Money Woodworking Videos: https://www.youtube.com/playlist?list=PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
🔗 Our Family's Small Business: http://greenacrehomestead.com
🔗 My Atomstack M4 Review: https://youtu.be/sc-ru_-2R4s
🔗 My Ortur 1 Year Review: https://youtu.be/4uvodYYJe8Y
🔷 xTool Amazon Links 🔷
🔗 xTool D1 Pro 20w: https://amzn.to/3EKPyH2
🔗 xTool Honeycomb: https://amzn.to/3kESNc5
🔗 xTool Air Assist: https://amzn.to/3EOBSKR
🔗 xTool Enclosure: https://amzn.to/3EOPeXK
🔷 xTool Website Links 🔷
US Store:
Store-wide Time-Limited Sales - Ends on Mar 21st (PT) - Up to $1362 (45%) Off on machines! (No code needed)
🔗 D1 Pro 20W: https://www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 D1 Pro 40W Kit: https://www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 NEW P2 CO2 Laser: https://www.xtool.com/pages/xtool-p2?ref=samcraft&utm_medium=null&utm_source=influencer
🔗 Landing page: https://www.xtool.com/pages/st-patricks-day-sale?ref=KgZ-ihT7Ehq2vm&utm_medium=null&utm_source=influencer
UK Store:
🔗 xTool UK St. Patrick's Day Sale: https://uk.xtool.com/pages/st-patricks-day-sale?ref=KgZ-ihT7Ehq2vm&utm_medium=null&utm_source=influencer
8th Mar. - 22nd Mar. Up to £1,300 (35%) Off on machines! (No code needed)
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
This video is designed to be a complete and in depth walk through for customers who purchased my custom designed xTool D1 Pro grid board template. I cover all steps of how to make this gridboard from start to finish as well as give helpful tips and ideas for customizing to your own needs.
#laserengraving #samcraft #xtool
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
100
views
1
comment