Honeywell 5808W3: Program to L7000

We show you how to correctly program the Honeywell 5808W3 to an L7000 control panel in this step-by-step video.

Honeywell 5808W3: http://alrm.gd/honeywell-5808w3
Honeywell L7000: http://alrm.gd/honeywell-l7000
Get Monitored! http://alrm.gd/get-monitored

With the Honeywell 5808W3 you will be able to detect both smoke and heat. Our tutorial video will walk you through the steps required to program the sensor to your L7000 control panel.

Out of the box, the smoke detector has 2 major parts: the mounting plate and the head. It is important to note that unlike a carbon monoxide detector, a smoke detector does not have an end of life. As explained in the video, the only thing that will wear down is the battery.

It is important that you note the dates of install and expiration as shown in the video guide. You should make a note of the expiry date so that you can adequately replace the batteries when the time comes. A good rule of thumb is to replace the batteries every 6 months.

To enroll the device, you need to activate the battery by removing the plastic tab and make a note of the serial number. The video will show you how to accomplish this and where the serial number is located.

Programming on the L7000 control panel is relatively straight forward. You need to access the “Tools” menu from the home screen by using the touch screen on the panel. The walk through will show you exactly how this is done.

You should follow along with the video to enter the programming mode and use the visual clues on the panel to make sure you are in the correct spot. You will need to define the zone for the detector with the first available zone.

Like most other programmable devices you have two options for entering the serial number: manually or self-enroll. The guide discusses the manual entry method. To self-enroll, you can utilize the test button on the Honeywell 5808W3 detector.

The install guide will tell you all the needed information to program the device yourself. In the tutorial, you will learn that you need to program the smoke and heat detector to loop 1. This will ensure proper alerts in the event the alarm rings.

You should be aware of the reporting and supervision selections, and the video will cover these in detail. The settings should allow the device to report and be supervised so that you are always covered. In the event of an alarm, the L7000 panel will alarm locally as well as sent a report to the central station so that action can be taken if necessary.

Once the programming is complete, you should return to the home screen on the L7000 panel and you can then test the detector. Following along with the video will show you how to accomplish the test to ensure everything is working properly.

Be sure to disarm the alarm from the testing and your 5808W3 detector is ready to mount in the desired space. Once mounted you will complete the installation and programming of your smoke and heat detector.