2GIG Edge: Adding a User Code

3 years ago
19

In this video, Michael from Alarm Grid shows you how to add a user code to the 2GIG Edge Security System. This is a great way to ensure that everyone who uses the system regularly has their own personal code that they can use for disarming the system. The 2GIG Edge Alarm System has support for up to 100 user codes, and you can set them up as needed. Additionally, a limited number of the users can also be set up with Automatic Bluetooth Disarming and Facial Recognition, which both serve as additional methods for disarming the system, beyond making a traditional code entry.

New users on the 2GIG Edge are added through the Users Menu. When you go to add a new code, you will need to enter that code and then confirm it by entering it a second time. The 2GIG Edge will also allow you to set up Automatic Bluetooth Disarming and/or Facial Recognition as you add the code, assuming that there are still slots open for pairing a Bluetooth Phone and/or Facial Biometrics. But setting up those functions is optional, and you can always do that later if you just want to set up a basic code for the time being. You will also provide a name for the user so that you can easily identify which person is associated with that code.

After a user code has been added, you can then use that code to disarm the system whenever it is in armed state. However, a standard user code will not be able to access advanced system settings. More settings can be accessed using the system's Master Code (default 1111), but you will need the system's Installer Code (default 1561) to access the full selection of system settings for configuring the 2GIG Edge Alarm System. Remember that if you perform a factory default of the Users setting, then any added codes will be deleted from the system. In addition, the Master Code will be reset to 1111, and the Installer Code will be reset to 1561.

https://www.alarmgrid.com/faq/how-do-i-add-a-user-code-to-my-2gig-edge

http://alrm.gd/get-monitored

Loading comments...