I installed Gray Guns FLAT Trigger & Short Reset into my P30 SK - I'll show you how!

Full install of Gray Guns Short Reset System and the Flat Trigger.
I picked the P30SK to show the extra step of removing the Firing Pin Safety.
The P30 and P30L do not have a Firing Pin Safety to remove.

If you're doing just the Short Reset system, after the Firing Pin Block spring is installed into the Slide, you can skip to 18:18 to reassemble your firearm.

If you're doing just the Flat Trigger, after you complete Disassemble the Fire Control Group (0:45), then skip to 12:00.

Chapters:
0:00 Intro
0:14 Why the P30SK install is different
0:29 Trigger break & reset
0:45 Disassemble Fire Control Group
3:49 Install extended Coil Pin into Decocker (Short Reset System)
4:42 Install Firing Pin Block Spring into Slide (Short Reset System)
12:00 Remove old Trigger
14:11 Trigger axle vs Pawl axle
14:54 Flat Trigger installation
16:06 Trigger install caught on camera **RARE**
18:18 Reassemble Fire Control Group (Short Reset System))
24:14 Lube
24:48 Grip assembly
25:40 Barrel and Slide assembly
26:28 Final Product!

Tools used:
- 1/16", 3/32", 1/8" punches for roll/coiled pins (they have a nub which centers into the hole of a roll/coil pin)
- 1/8" flat punch
- Trigger return spring pliers
- Hammer
- Armor's puck (mine is a brick)
- Plastic cleaning pick (the black stick thing)
- Spare picatinny rail key from TLR light
- The item John Wick used in a bar...

If you found this video helpful, consider donating and funding further videos:
https://paypal.me/everydayAegis?country.x=US&locale.x=en_US