Why Mobile Home Doors Have Gaps At The Bottom

Why do mobile home doors have gaps at the bottom? Because you don't have a return air, so you need an inch and three quarters to two inches at the bottom of your doors to help cool and heat the house.

You can easily add, upgrade the inside doors of your mobile home to a house-type. Just remember to cut off the bottom.

⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman
00:25 Replacing mobile home inside door with house type door
01:01 There are gaps because you don't have a return air
01:25 Air would pull, but wouldn't pull back to your filter
01:45 Don't think you can put the door down close, your heat and air won't work as well
02:10 Solution is get a regular length door for house and cut it off
02:30 Want to cut on the bottom
02:45 The door's a primer. You'll need at least one coat of paint on it.
03:45 Cut the door
04:30 House type door installed into a mobile home
05:10 Be an American not an American't

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#MobileHomeRepair, #MobileHomeImprovement, #MobileHomeDoors