Drywall Finish Batten Strips In Mobile Home - How to Finish Batten Strips in Mobile Home

This is the second part of how to change and drywall finish batten strips in your mobile home.

All on the journey to get your mobile home, more home-like.

⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:11 How to take off batten strips and hammer down nails
00:21 Take your drywall mud and put it on
00:53 Lay your tape right on top of the crack
01:46 There's your first coat of drywall mud
02:30 Bust out one side, then your other
03:00 He puts on with one size knife and then pulls off with bigger knife
03:25 It's a learned skill don't feel bad if takes you longer.

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

So remember, I showed you guys to take off the batten strips and then hammer down the nails and staples that are standing up around your hammer down. Then you take your drywall mud and you put it on. You can do it that way, or you can do it this way.

You want to make sure you get enough mud to cover. And then that if you down, the tape will blister up when you put mud on top of it later. Which you'll do a second coat. Lay it right on top of where that crack is.

I know I'm making it look easy, but I've done it for a long time and I just can't help it. Perhaps we'll show you guys how to do the drywall finishing it. It's not something you can learn overnight if it is. Then I've been pretty stupid because it took me a long time to get any kind of good. So anyway, you pull that down. Tight as you can. There's your first coat and then we'll finish it out, which I'll do is I'll put mud on like so if you just have a six-inch knife, you can do it with a six-inch. But I prefer to burst out with a ten and then a twelve. Then you spread it out.

But. Got to do one side. So that the knife will be able to cover when you go over it, like so. Do the other side know a lot of guys won't do but one side at a time? I understand.

But I can do both sides so and I don't I'm very much sanding. I don't do any sand as a rule. And normally, I put it on with a one size knife, and then I use a bigger knife, like if I put on with the six, I would pull it off with an eight-inch knife.

But you don't have to do both sides, you can do one side of everything, come back a bit after drys and do the other side, but there they'll be pretty flat. And then you just do that everywhere. Now I imagine that other people will have to work at it longer and don't feel bad.

That's part of it. But we'll get it. We're getting away with that great big hump. We're making it look more like a house. So we'll finish it and then we'll texture it, and I'll show you when I texture.

#MobileHomeRepair, #MobileHomeImprovement, #BattenStrips