Mobile Home Skirting J Channel Installation

Metal skirting j-channel you want to start with the tallest corner. Always double check that you are level with the back of where your panels need to be. You want your nails to be about every 3 feet. Cut and set j-channel corner for metal skirting.

This is a simple metal skirting job, with few cuts.

⏱️⏱️Chapters⏱️⏱️
00:00 Follow along with a handyman
00:25 Start on the tallest corner j-channel
01:19 Measure with your level after placing the j-channel
01:50 Nail J-channel down
03:30 Set next piece of j-channel
03:44 You can always make a mark in the mud once you are level
03:54 Remember when your setting the j-channel the back is where your skirting will be
04:10 Next corner with the j-channel
05:05 Always double check your measurements
05:50 Pushing down the j-channel-you cut it
06:33 Another cut to encourage it to lay where you need it
07:15 Backing up and filling the nails in for the side done
07:25 You want the nails about every 3 feet
07:58 Be an American not an American't

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#MobileHomeRepair, #MobileHomeSkirting, #J-channelCorners