Click Power Budget - Supply

You can add up to 8 I/O modules for each CLICK PLC CPU unit.
If using the C0-01AC CLICK power supply there are no power budget concerns.
The 1.3 amps supplied more than adequately handle any possible I/O module configuration.
If you are using the C0-00AC CLICK or external manufactures power supply there might be power budget considerations.

The System Configuration Setup window in the CLICK PLC software will calculate the power budget for you, either online or offline.

General information on the Click series of controllers:
www.clickplcs.com/config

There are also system configuration tools that will calculate the power budget, I/O count, and price.
Click PLUS PLC Configuration:
https://www.automationdirect.com/clickplcs/config/clickplusconfig
Click PLC Configuration:
https://www.automationdirect.com/clickplcs/config

Programming and examples of the Click and Click PLUS PLC series can be found at this URL:
https://accautomation.ca/series/click-plc/

There are several reasons why we are using the Click and Click PLUS PLCs. Here are just a few.
- Investment is low for the hardware and the software is free
- Standalone PLC with built-in I/O
- Communication ability - Ethernet Port, RS232, RS485 - support for protocols such as Modbus RTU, Modbus TCP, etc.
- Ability to expand the system with a variety of modules including RTD and Thermocouple inputs directly.

ACC Automation
https://accautomation.ca/