Premium Only Content
EPISODE 50: Toolless tool Box Holder for the RK25/T25 tractors
Fixing the most annoying problem with a new tractor! When I bought my RK25 the tractor lacked a toolbox. There was one on the backhoe, and I used it quite a bit at the beginning. However, I don’t keep the backhoe on all of the time, especially if I have something else on the 3point. I see some people mount the tool box on the back of the tractor over the fuel tank, but I find that inconvenient to fill diesel. I also don’t think there is enough room for it when the backhoe is connected and the seats are back to back.
I began to think of how I could mount a toolbox without needed tools to remove or put on just in case there is a need to remove it in the field quickly. I also need to make sure that it does not get in the way of things I need to be clear on the tractor such as grease zerks or the hydraulics.
I thought of a new bracket that can slide on and off the tractor and only has to use a thumb screw to remove and reattach. Would this be possible? Find out!
If you like the ideas, the plans are here in the video. All of this was made with scrap metal leftover from the sawmill and making the man lift.
Here are the plans if you so desire to translate:
https://engagingexposures.com/galleries/Toolboxplans.pdf
Be sure to like and share the video and subscribe to the channel, AND press the notification bell so you know when new videos are posted. While you are here make sure to share the video!
Youtube: https://youtu.be/RK-dQur9K8c
Rumble:
Rumble Channel: https://rumble.com/c/c-802993
Youtube Channel: https://www.youtube.com/c/PeaceIntheValley
-
13:33
Peace in the Valley
6 months ago $0.02 earnedWe are being attacked! E167
642 -
12:40
Peace in the Valley
3 years agoEpisode 4: Make a handle for a tool!
85 -
23:56
Peace in the Valley
3 years ago $0.05 earnedEPISODE 31: - RK25 Hydraulic Top link Installation
95 -
33:54
Peace in the Valley
3 years ago $0.05 earnedEPISODE 17: Repairing the RK25 Tractor Hood
163 -
5:19
Buzz Stone's AirWaves, All Things Radio
3 years agoAirWaves Episode 25: Xiegu, G90-H1 Holder/Cooling Fan Review
78 -
1:47
Peace in the Valley
3 years agoEPISODE 29: SHORT - RK25 Hydraulic Top link Unboxing
211 -
0:09
ViralHog
3 years ago $0.04 earnedHammer Trick Horseshoes Tool Into Holder
413 -
20:22
Peace in the Valley
3 years agoEPISODE 28: Trailer Tool Box Install and Review - Sheet Metal Screws?
36 -
41:30
Peace in the Valley
3 years ago $0.03 earnedEpisode 39: RK25 50 hour service - Don’t FORGET Mesh Screen
76 -
9:37
Computer Basics
3 years agoMacOS 11 - Episode 3
34