75 KVA Power Distribution Panel - 480V to 120/240V 1PH - (1) 3100R6W (3) 360R6W Receptacles

https://www.larsonelectronics.com/product/150505/75-kva-power-distribution-panel-480v-to-120-240v-1ph-1-3100r6w-3-360r6w-receptacles

This unit is Made In USA - Manufactured in Texas

The Larson Electronics MPD-480V.1PH-75KVA-400MLO-3X240.60A-1X240.100A power distribution substation converts 480V electrical current into single phase 120/240V AC. This unit provides operators the ability to safely tap into and distribute 480V AC power from a variety of sources including generators and direct grid power.

Portable Power Distribution Purpose and Use: The MPD-480V.1PH-75KVA-400MLO-3X240.60A-1X240.100A portable power distribution system gives operators the ability to power their 240V equipment from a single system. On the primary side, operators connect 480 volt using a customer provided cord. On the secondary side, operators connect to one 3100R6W receptacle and three 360R6W receptacles for 240V equipment. All receptacles are protected by weatherproof covers.

Operation: A customer provided cord brings 480V power to the NEMA 3R 200-amp, 480V three phase primary disconnect, which contains two 200-amp time delay fuses, and passes 480V single phase through to the transformer. The NEMA 3R 75 KVA transformer converts 480V power to 120/240V single phase and passes the current to the secondary side. The secondary side of the transformer feeds a NEMA 3R 400-amp, 120/240V single phase main lug only panel. This secondary side contains one 100-amp breaker protecting one 100-amp, 3100R6W, 250V receptacle and three 50-amp breakers protecting three 60-amp, 360R6W, 250V receptacles.

Protective Construction: Unlike many portable power distribution boxes made of plastic and utilizing thin gauge, low grade metals in their construction, this unit is designed for serious use and is ruggedly constructed to withstand demanding conditions and heavy duty industrial applications. The transformer and load assembly is mounted on a 3/16" thick carbon steel mounting platform and the load center/distribution assembly is mounted to the standard 2" x 2" x 1/8" square carbon steel tubing frame, resulting in an extremely stable, durable and well protected power distribution platform. This model is equipped with forklift skid pockets, locking casters, and a top located lifting eyelet which allows easy lifting with cable or chain hooks. This can be replaced for an additional cost with stainless steel, hot dip galvanized steel, or aluminum depending on the customer’s needs. Larger units are available upon request and can be equipped with skids or trailer mounted.

Certification: Larson Electronics is a UL 1640 panel shop and certified to build portable power distribution systems. All units are built in accordance to NFPA 70 (National Electric Code) and certified to UL 1640. All equipment is NEMA 3R rated for indoor and outdoor use and provide a degree of protection against dirt, water, and ice. NEMA 4 and NEMA 4X equipment can be equipped upon request.

Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1