Solar Power Generator with Light Tower Mast - 600 Watt

https://www.larsonelectronics.com/product/148980/600-watt-solar-power-generator-with-light-tower-mast-t-head-mounting-bracket-included

Made in Texas

The SPG366A-600-TJM from Larson Electronics is a 530 Watt Solar Powered Generator with Light Mast Tower and Junction Box that provides an ample power supply for work locations that do not have one readily available. This generator features two 265 watt solar panels to charged the 200aH 24V battery bank with 100aH useable power. The SPG366A-600-TJM has a small footprint that makes it ideal for a wide variety of work locations. The weatherproof pyramid enclosure provides protection from the elements and is fully removeable for maintenance. The SPG366A-600-TJM can be configured in 12V or 24V, and is ideal for security camera, temporary remote wireless internet distribution, lighting and equipment deployment. The SPG366A-600-TJM also includes a T-Head mounting bracket at the top of the mast which enables operators to mount their existing equipment such as junction boxes, lights or cameras.

The SPG366A-600-TJM solar powered generator with pneumatic light mast tower is ideal for operators who have the need to deploy security equipment, cameras, network gear, or other electrical equipment on work sites or job locations where power is not readily available. The towable unit can be transported and deployed by a single operator for increased versatility on the job. The equipment tower is raised and lowered via an included air compressor. The compressor and all other on-board electronics are powered fully by the solar charged battery bank.

Light Mast/Equipment Tower: The SPG366A-600-TJM features an twenty foot tall pneumatic light tower and equipment mast that has a T-Head mounting bracket mounted at the top. The aluminum mast is raised and lowered to its full height via an on-board air compressor. The compressor is operated via controls mounted on the inside of the unit`s access door. Operators make sure the control systems switch is powered on and the mast drain valve is fully closed by turning it completely clockwise before toggling on the air compressor switch. Once the compressor switch is turned on, it will automatically begin to raise the mast and any mounted equipment to a height of twenty feet. The mast lowering process is just as simple. Operators simply confirm that the air compressor power switch is in the off position before opening the mast drain valve by turning it completely counterclockwise. The mast will lower itself back to its lowest position. Once that occurs, operators reclose the mast drain valve completely.

All power on the unit can then be shut off for storage or transport. Internal wiring within the pneumatic mast aids in cable management, as well as reducing tampering and vandalism. Another very useful feature of the air compressor is that it will automatically "top off" every few days to ensure that the mast stays in a fully extended position for longer deployment periods.

Trailer: The SPG366A-600-TJM comes mounted on a durable and ruggedly constructed pyramid style trailer that is designed with both toughness and ease of use in mind. The trailer features a removeable tongue, spring axles and four retractable 1000 pound manual crank leveling outriggers for safe and secure job location deployment. The solar panels are mounted to the powder coated desert tan pyramid enclosure and have a slider system that allows them to be open during operation and slid over each other for safer transit. For long term deployment scenarios, the tongue can be removed by pulling out a retention pin and removing the tow cables before pulling the tongue straight out for a smaller footprint, and to reduce the chance of theft during deployment. The pyramid enclosure also offers operators plenty of room for logos and advertisments if so desired. The pyramid enclosure carries a NEMA 3R weatherproof rating. The top of the pyramid enclosure is fully removeable for easier maintenance access and to allow operators to more easily install their security equipment within the housing.

Batteries: The SPG366A-600-TJM features two 200aH 12V deep cycle acid glass mat rechargeable batteries connected in series for a 24V battery bank maintaining 200aH. Of the 200aH, 100aH are useable while maintaining 50% capacity. It is recommended to not allow the battery bank to deplete below 50% capacity, doing so will reduce longevity of the batteries and reduce consecutive charge cycles.

Click to Subscribe: https://www.youtube.com/channel/UCeaWkKO35T-VYgJ-Jc-bN_g?sub_confirmation=1