How To Install The Apex Action Enhancement Trigger For The Springfield Hellcat

Apex's Scott Folk walks you through the proper way to install the Apex Action Enhancement Trigger for the Hellcat pistol from Springfield Armory.

Recommended Tools:
– 1/16" Pin Punch
– 3/32" Pin Punch
– Small 6oz to 8oz Hammer
– Smooth Jaw Vise
– A Roll of Tape (handy but not required)
– A Gun Grade Lubricant

Timecodes
0:00 - Intro
0:34 - Tools
0:44 - Kit Contents
0:51 - Removing Pins
1:11 - Remove Internals
1:41 - Sear Housing Pin Safety ID
1:58 - Remove Trigger Bar from Sear Housing
2:13 - Sear Housing Disassembly
2:51 - Remove Trigger from Trigger Bar
3:18 - Stock Parts vs Apex Comparison
3:36 - Install Trigger Body onto Trigger Bar
6:06 - Trigger Body Function Check
6:28 - Sear Housing Reassembly
8:36 - Reinstalling Trigger Bar
10:22 - Installing Sear Housing Pin Safety
10:49 - Frame Reassembly
12:09 - Reinstalling Pins
13:51 - Reinstall Takedown Lever
14:37 - Function Check Frame
15:33 - Striker Spring Replacement
17:45 - Function Check Slide
18:15 - Lubrication
20:36 - Final Function Check

————————
SOCIAL LINKS
————————
FULL30: https://www.full30.com/channels/apext...
INSTAGRAM: https://www.instagram.com/apextactical
FACEBOOK: https://www.facebook.com/apextactical
TWITTER: https://twitter.com/apextactical
GUNSTREAMER: https://gunstreamer.com/@ApexTactical

Customer Service Inquiries: guns@apextactical.com
© Apex Tactical Specialties