My GCODE Files Don't Show Up On My 3D Printer When I Insert The SD Card (Or I Can't See The Name)

My GCODE Files Don't Show Up On My 3D Printer When I Insert The SD Card Or I Can't See The Name of the files to identify the right file to print.

Especially when you're using Ultimaker Cura it can produce some problems for your 3D printer when it's preparing the GCODE file for your USB stick or micro SD card. So what's the problem and how to avoid that you can see and identify your files easily again on your 3D printer. Watch an see.

Disclosure: some of the links provided might include affiliate links and if you use them, it will show your appreciation to my channel and my work and pays for my equipment and help my channel grow - which will again help you. There is absolutely NO disadvantage for you and you will pay absolutely same price as without this link. Thank you for supporting my channel!

Disclaimer: The information provided on this video is for general purposes only based on my personal experience and are my very personal opinion, trying to help other people and should not be considered as professional advice in any kind. I am not a licensed professional so make sure to consult with your professional consultant in case you need to. All the links I provide in my videos, the description or in my feedback I provide in an effort to help you as good as I can, but I cannot give any warranty on them and hence you are using them on your own risk as I use them on my own risk.

-~-~~-~~~-~~-~-
This is my NEW storefront on Amazon where you can find all my recommended FAVORITE products:
https://www.amazon.com/shop/allcheckoutproductvideosreviewsinfostests
Thanks for supporting my channel to keep it alive!
-~-~~-~~~-~~-~-