Volquartsen Target Sear Trigger Kit VC77TS for Ruger 77/357 77/44 77/22 77/17 Series Rifles

3 years ago
169

In this video, I disassemble a Ruger 77/357 and show how to install a VC77TS Volquartsen Target Sear Kit.
This Volquartsen Target Sear Kit is available at http://TriggerShims.com
Here is the page it is on - https://www.triggershims.com/ruger_m77.html
This video also applies to the 77/17, 77/22 and 77/44
This installation will lighten your Trigger Pull - the Easiest Trigger Job for this series rifle.

This VC77TS Kit will Reduce Your Trigger Pull to around 2 Pounds by simply changing the Sear and Sear Spring.
If this is too light for your hunting rifle, you can keep your factory spring installed to increase Trigger Pull, or install a Wolff Sear Spring. This is a No Gunsmith Required Trigger Job for these rifles, very easy to install with these simple video instructions.
Always Safety Check your Rifle after any parts are installed, and if there are any questions regarding safety - see a Qualified Gunsmith. TriggerShims Brand Gun Shims are available for this rifle for the Trigger, Sear and Bolt.

Loading comments...