Temple Audio RGB LED Strip - Pedaltrain Classic 1

I put Temple Audio Design's Trio 43 LED Strips under a Pedaltrain Classic 1 Pedalboard. I used the Trio 43 size to have more LED's. I just wrapped it around the inside of the top two rails.
My power supply is a Truetone CS-7. I have it plugged into a 200mah spot by itself. Note that this barrell plug on the LED Strip will not directly plug into the CS7 Power Supply. You have to use one of their extenders. Any of them will work just make sure it's the standard CENTER NEGATIVE Polarity.
It looks really cool. I like the slow transition but it will do all kinds of crazy flashing modes or just stay on a solid color of your choosing. Also, it has a memory so it starts up on the same setting it was on when you turned it off. Even after unplugging the pedalboard.
The remote works great even though the sensor is under the board. I've pointed it down at the board from every angle and distance and it never failed to work. Very pleased considering how cheap this was and that it only took 10 minutes to install.

https://www.sweetwater.com/store/detail/RGB-43--temple-audio-rgb-led-light-strip-for-trio-43?mrkgadid=3331289271&mrkgcl=28&mrkgen=gpla&mrkgbflag=0&mrkgcat=guitars&&acctid=21700000001645388&dskeywordid=92700046937615700&lid=92700046937615700&ds_s_kwgid=58700005285208926&ds_s_inventory_feed_id=97700000007215323&dsproductgroupid=373037010929&product_id=RGB-43&prodctry=US&prodlang=en&channel=online&storeid=&device=c&network=g&matchtype=&locationid=9013085&creative=332063179815&targetid=pla-373037010929&campaignid=1708734377&gclid=CjwKCAjwq_D7BRADEiwAVMDdHlUAoktkN09mw5WaYRPek9T-7wcSr-EcssaTER3zdImaHohy7FACTRoCElkQAvD_BwE&gclsrc=aw.ds