ELEK Cable High Voltage V6.5

Everything you need for power cable current rating calculations
Wide Range of Installation Methods

Standards IEC 60287 Series, IEC 60853-2, IEC 60949.

Validated with CIGRE TB 880. Armour losses to CIGRE TB 908.

In Air and Groups in Air
Unenclosed - exposed to sun or shaded. Enclosed in ducts. Groups of multi-core or single core cables. Adjust ambient air temperature.

Bonding Arrangements
Considers cable circulating and eddy current losses. Solid, single-point or cross-bonded earthing arrangements.

Direct Buried or In Ducts
Equally or unequally loaded multiple buried circuits in any custom arrangement of any cable type. Soil dry-out around cables.

Buried in Thermal Backfill
Multiple custom cable arrangements buried direct or in ducts in thermal backfill. Soil temperature plots.

Unfilled Troughs
Cables ratings for cables installed in unfilled cable troughs where the trough is buried and covered on all sides up to ground level.

Ventilated Tunnels
Calculates current ratings for multiple circuits installed inside custom tunnels with ventilation to IEC 60287-2-3.

Cable HV Software
Risers & J-tubes
Cables installed in risers with open ends, one end open or closed at both ends. Current ratings for cables in tubes for offshore wind farms.

Finite Element Method
Extends beyond the limitations of the IEC Standards. For example, models multiple zones of soil with different thermal resistivity.

Its Not for exchange or others!
If u want buy contac-me.
My telegram
@ ReisCAD
https://t.me/anysoftwarez
e-mail: anysoftwarez@gmail.com