The finished ARP 9 Build

Here is the finished project. the G&G ARP 9 is now shooting 300- 305 FPS with 28RPS

Like I had said before that the T238 V2 Bluetooth mosfet failed right out of the box. I was lucky that I had a new V 1.42 DTU and installed that with no problem. I replaced the Maxx trigger spring and the speed trigger is functioning perfectly now. after tuning the trigger I used a small amount of blue lock tight on both set screws on the Maxx speed trigger. I replaced the main spring from the stock spring with a M105.
I am happy with the way this project ended up.