Home Shop Rifling - Part 2
I recorded and edited the majority of this video in 2018, but rifling buttons in the marketplace have gone through a huge change. So some of the information is outdated but there is good stuff in there as well so I decided to share. People keep asking why heat treat before rifling. Didn't think I had room to address it here but here it is! A good barrel needs to be strong and tough. 4140 or 4150 steel at Rc 28-32 is a good hardness range. While being harder/stronger makes it harder for the button to go through because it takes more force to swage the rifling into the steel, the increased hardness also reduces the friction between the button and the steel and makes it easier to go through. But in the contest between reduced friction and increased force for swaging, I think the latter wins. But so what? It's a bit harder to push the button through but who cares? The machine doesn't care and the button survives just fine, and in the end you have a good, strong, tough barrel. Another HUGE reason is the tendency of the button to pick up steel from the bore if it's not strong enough. It involves coefficients of friction and normal forces, and is a little technical. Another issue with doing the hardening after? The main reason is that heat treating a barrel requires taking it to 1550 deg. F and more, and then quenching. Then tempering at around 1200 deg. F. Good luck maintaining that beautiful bore you just rifled after a process like that! And good luck keeping it straight! The other main reason for not heat treating after rifling is that all that strain-hardened surface the bore had from the button rifling process is now gone, stress-relieved during the heat soak at 1550 deg. It's been said that the surface of the bore has been measured to as high as nearly Rc 60, and that's in a barrel that's around Rc 30! A bullet traveling through a bore that hard will experience MUCH reduced friction over something even in the Rc 30 range. And you've got a bore that will be extremely wear resistant. There are some other minor reasons but I've written enough! ;-)
-
59:56
The Dan Bongino Show
3 hours agoTrump Speaks Out On The Threat To His Life (Ep. 2336) - 09/25/2024
186K782 -
1:02:36
The Rubin Report
1 hour agoJustin Trudeau Caught Ignoring Canada’s Dirty Secret
10.2K18 -
1:27:32
Steven Crowder
3 hours agoVarmaGate Part 2: Monkeypox Media Spin | Alex Jones Infowars to be Liquidated
148K264 -
6:22
Stephen Gardner
22 hours agoBREAKING: ABC Debate Scandal Explodes- Whistleblower Reveals Everything!!
5.29K10 -
LIVE
Midnight's Edge
2 hours agoDisney losses and Delays, Paramount mass firings | MEiTM #618
229 watching -
9:16
Dr David Jockers
1 hour ago3 Simple Exercises Proven to Improve Memory and Cognition
40 -
0:39
Steve Inman Gone Wild
7 days agoCat Has Had Enough
12.1K23 -
LIVE
WeatherNation
15 hours agoWeatherNation Live 24/7
428 watching -
1:16:38
Graham Allen
4 hours agoIran Threatens Trump With Assassination! Alex Jones’ InfoWars Being SOLD? THEY ARE COMING FOR US!
62.2K103 -
2:06:25
Matt Kohrs
12 hours agoStock Market Open: The Calm Before The Storm || The MK Show
36.7K3