How to Disassemble and Reassemble the HK VP9

Workman Firearms

"Disassembly and Reassembly of the HK VP9" by Workman Firearms:

Disassembly:
1. **Clearing the Firearm:** Adam removes the magazine and racks the slide to the rear. He physically and visually inspects the chamber and mag well to ensure the firearm is clear.

2. **Takedown Lever:** With the slide locked back, Adam pushes the takedown lever down clockwise to the 6 o'clock position, locking it in place.

3. **Slide Removal:** Adam uses the ambidextrous slide release to push it down and then pulls the slide off the front of the frame.

4. **Frame Set Aside:** The frame is set aside as it's broken down as much as needed.

5. **Recoil Spring:** Adam compresses the recoil spring towards the front of the slide and removes it.

6. **Barrel Removal:** Adam pushes up on the bottom of the barrel and slides it out of the slide.

Reassembly:
1. **Barrel:** The flat part of the barrel faces down and is slid into the slide from the front.

2. **Recoil Spring:** The part of the recoil spring with the small notch faces the back of the barrel. Adam compresses the spring, and it catches right in the barrel.

3. **Slide onto Frame:** Adam starts at the front of the frame and slides it all the way back, locking it with the slide lock.

4. **Takedown Lever:** Adam flips the takedown lever counterclockwise back up into its original position.

5. **Function Check:** Adam releases the slide lock and performs a function check, ensuring the trigger pulls and resets properly.

The tutorial is clear, concise, and provides valuable information for anyone looking to understand the inner workings of the HK VP9 or perform maintenance on their own firearm.

#workmanfirearms #hk #vp9

Legal Notice: All content on the Workman Firearms Training Group YouTube channel reflects our own opinions and should NOT be taken as legal advice. Please seek out the guidance of professionally trained and licensed individuals before making any decisions.

Disclaimer: These videos are strictly for educational and entertainment purposes only. All work on arms should be carried out by a licensed individual, and all state and federal rules apply to such work. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos.

Disclaimer: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, Workman Firearms may receive a small commission. There is no additional charge to you! Your support helps us continue our mission to empower individuals with the knowledge to protect themselves and their loved ones, and to maintain the quality of our training services. Thank you for supporting Workman Firearms and Range 42, and for being a part of our commitment to safety, individual rights, and responsible firearm ownership.

Recommended Gear:

https://amzn.to/3QN1Gy4 - Hearing Protection
https://amzn.to/45tSItm - Shooting Glasses

https://amzn.to/3sn5aNg - Glock tool
https://amzn.to/3QKZdEj - Glock Parts Tray
https://amzn.to/3seZbKt - Glock Mag Loader
https://amzn.to/3KLDoAu - Base plate tool