Chapter 35 1970 TransAm Clone - Steering and Radiator

Fabricated tank straps. Fabricated four bosses to mount straps to.
Installed strap bosses to vehicle.

Modified seat brackets to sit lower in vehicle. Mocked up steering column and master cylinder. Installed pedal box.

Drilled out front of crankshaft. Pinned dampener hub in place. Installed dampener. Modified and installed timing pointer and verified when pointer is at zero number one cylinder is also at top dead center

Installed hydroboost. Installed master cylinder. Installed steering box

Installed A/C condenser. Started modifying radiator mounting.
Fabricating brackets to install radiator securely

Started fitting steering column and firewall pass through.
Completed mock up of steering column. Fitted steering wheel quick release.

Correction to audio about wheels sizes. Front wheel will be 9.5" and the rear will be 11.5". Tires size can range from 275 to 285 on front and 305 to 315 on the rear.