How I repair my ignition switch on my 2003 Honda Crv in the Philippines!!

How to remove and repair electrical ignition/starter switch on a 2003 Honda Crv. This can also be used on a multiple Honda models. Quick and easy, always make sure that you have properly diagnosed the problem and that you are sure this is the problem. Some symptoms off this failure are when you go to crank there is no crank at the starter, all lights on the dash are on but the engine will not crank when hot there sometimes a buzzing noise coming from the switch, also sometime early sign of failure is when you go to start the engine when you turn the key there is a delay and you hear a buzzing noise (bad contact). Hope this video will help. you can always replace the switch if it is available and you are able to.
#hondacrv
#ignitionswitch
#crv2003

Here is a list of materials and tools i used, these are my amazon affiliate link no extra charge thank you for supporting the channel.
1. Ignition Starter Switch (Amazon) Link: https://amzn.to/4cJS3Yg

Disclaimer:
Autohrycfix assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. Autohrycfix recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 20 years working on cars. Autohrycfix does not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault/responsibility and not Autohrycfix.