Lee Ultimate Turret Press

https://leeprecision.com/ultimate-turret-press-overview

The most versatile and convenient turret press ever made. The press is topped with an indexable tool carrier. The tool carrier is supported by a steel ring. Just enough clearance both radially and axially to allow easy indexing and radial float to provide perfect die alignment. Because the tool head is supported on the circumference no tool head tipping can occur. When an operation is performed, the tool carrier is raised until it contacts the steel support ring maintaining perfect perpendicularity to the ram.

The round tool carrier is precision machined on all surfaces. Available in 4, 5 and 6 die positions. Each die position is machined to accept any Lee Breach lock bushing. Tool heads can be switched in under two minutes with a simple ¼” hex key wrench. Each die position has a corresponding locating hole to receive a positive locating pilot pin. This locating pin provides positive location of the tool carrier on the presses up stroke and locks the tool carrier for die changing and adjustment.

Every downstroke of the press automatically advances the carrier to the next tool position. A 60-tooth ratchet clutch is overload protected and works with all number of carrier configurations. A case ejector travels with the indexer and ejects the completed round to the included bin.

The Big Press all-steel compound toggle linkage sizes the most difficult cases with ease.

Ergonomics are excellent with the formed lever and roller handle. The balanced lever design is easy to operate and will not drop and pinch a finger.

The finishing touch, a tool rack surrounding the steel tool carrier holds Die wrench, ¼” hex key wrench, alternate primer arm and Safety prime.