Installation Keyless go with remote start Audi A5 S5 A4 Q5 2008 2016

This video show how to install a keyless go system on Audi A5 8T 2010 2 doors, all the system is plug and play except the start button which you must to create a hole for install it. No wire to cut or solder. It is very easy installation, system work well, we placed the antenna on side but you can use different place and specialy is your car have 4 doors. maybe better in middle.
VIDEO INFORMATION :
Please pay attention,
If you install this module and have only the door who close or open with remote key button ONLY without warning light without folding mirror and closing window, without keyless entry, you can find on keyless side module, 8 little white button, it can be up or down, UP is OFF and DOWN is ON.
we use this combination :
1 = down
2 = up
3= down
4= down
5= up
6 = down
7= down
8= down

with this combinaison everything was working perfect, door closing with warning light + mirror folding and windows closing. Remote start work also.
You can have folding mirror only is your car have folding mirror and windows closing activated (with VCDS or ODIS for exemple).

You can find the keyless module on Aliexpress, For Audi A4/Q5/S5/A5 2008-2017(without Push Start) Add Push Start Remote Start and Keyless Entry system Plug Play, check the link :

https://s.click.aliexpress.com/e/_AmtU2X

We used GoPro 8 black camera for this video, check the link :

https://amzn.to/344NzhD

Disclamer: This video is not sponsored by any brand mentioned throughout this video. All opinion mentioned are my own. Some links provided above are affiliate links. They do not cost you anything, but i make a small percentage from sale. I share the link only with tested product, if the product is not good, i will not share any link of the product. Thank you for your support.