Modern Adirondack Chair Build

1 year ago
4

I designed a modern Adirondack chair because I've found most to sit too low for my taste. Also, I wanted to add a more modern flair to it. I sought out initially to make a modern lounge chair but as I looked at it more I found it to be more fitting as an Adirondack. So here we are! I made mine out of eucalyptus but I would recommend something that isn't so hard such as cedar, sapele or white oak.

Digital files available here: https://bit.ly/3Pmzu3E

Templates Available here: https://bit.ly/3PlNv1M

Plans available soon!

Affiliate Links (These help support my channel):
3M Cubitron Sandpaper 775L (my preferred sandpaper): https://lddy.no/1i4wg
Grizzly Plug Cutter: https://amzn.to/3qNLh1O
Set Up Blocks: https://amzn.to/480x5TS
XFasten Double Sided Woodworking Tape: https://amzn.to/3R6AmuG
Ultimate Flush Trim Bit: https://bitsbits.com/product/udc9112-ultimate/ref/6233/
Totalboat: https://bit.ly/3IEHrOr
Starbond: https://bit.ly/3ITPpUy
MircroJig: https://bit.ly/3XecHbP
Magswitch: https://bit.ly/3H6uhJl
Bits & Bits: https://bitsbits.com/ref/6233/
Rustic Lumber Finish: https://bit.ly/3mZWDxF
Bidwell Wood & Iron: https://bit.ly/40geRJL (Use code COFFEY10)
Jobber: https://bit.ly/3iPzZps
Grabo: https://order.grabo.com/u/Coffey
Coffey Grinds: https://bit.ly/3GKL6rR

00:00 Introduction
00:33 The Plan
00:56 Picking Out Lumber
01:41 Markup For Rough Cuts
03:31 Rough Breakdown
05:45 First Mock Up
06:47 Mortise & Tenon
08:21 Cleats
11:10 Draw Bore Mortise & Tenon
14:04 Slats
17:50 Surface Prep and Finish
19:26 Cutting Plugs
20:18 Applying Finish
20:50 Assembly

#woodworking #chair #diy

Loading comments...