Wuben X-1 Flashlight - Daylight In Your Hands

In this video I review the new Wuben X-1 flashlight
https://www.wubenlight.com/?ref=edz&fbclid=IwAR3hNJjWumM2B1AnpQvLXPH_0oxfRDWPzgwI6hOtd30YS3Jr3kzRPqSyzgE

Included Accessories
Bike mount
Holster
Lanyard
USB-C to USB-C fast-charge cable

Key Features
3 x CREE XHP70.2 LEDs
USB-C fast charge – 2 hours (PD Fast Charging?)
Two waterproof cooling fans

Physical Specifications
Length 5.06” / 12.8 cm
Head width 2.2” / 5.6cm
Body width 2” / 5.1cm
Height 1.1” / 2.8cm
Weight: 13.4oz / 380g

 
Performance Specifications
Eco 20 lumens 220 hours
Low 400 lumens 14 hours
Medium 1000 lumens 5.5 hours
High 2600 lumens 2 hours
Turbo 12000 – 3000 l 1 min – 1.7 hours
Strobe 3000 lumens
SOS 200 lumens
Beam 303m / 23000 candelas
Dust-Waterproof IP55 (limited dust ingress - low pressure water jets from any direction)
Impact resistance 1 meter

Modes of Operation
Electronic Lockout
Lock - With light turned off, press switch 4 times. Light will flash 3 times
Unlock – press the switch 4 times
Basic Operation
Press the switch quickly for on or off.
While the light is on, press and hold the switch to cycle through Eco, Low, Medium, and High. Light has memory for last setting used
To access Eco, long press the switch while the light is off
To access Turbo, double press the switch while the light is on or off
To access Strobe, triple press the switch while the light is on or off
To access SOS, triple press the switch while in Strobe setting
Programing
Turn light on to the lumen setting to be changed. Press the switch once and quickly press and hold the switch again. Intensity will increase/decrease. Release switch when desired intensity is achieved. Light will flash twice at high and low end of the range
Eco 20 – 400 lumens
Low 400 – 1000 lumens
Med 1000 – 2000 lumens
High 2000 – 3000 lumens
Restore to factory settings – With light in electronic lockout, press the switch three times (single-press followed quickly with a double-press followed quickly with a triple-press). Light will come on in Eco mode