New Fire Extinguisher Mount For The 1st gen 4Runner

1 year ago

Time to replace the ancient fire extinguisher in the back of the 4Runner to get it ready to hit the trails again.

The old extinguisher lacked a good mounting bracket, but it was all I could find at the time. This extinguisher should have been replaced long ago.

Mounting bracket:
https://amzn.to/3LtCx7P

I used some Loctite 638 retaining compound:
https://amzn.to/451locJ
on the threaded end of the release pin. Some feedback on Amazon mentioned this could pull out and mine did. I applied the retaining compound to the threads then clamped the release knob in a vise and screwed the bracket onto that to get it tightened well.

2-1/2 pound fire extinguishers:
https://amzn.to/3RtpZBs
The bracket will hold a larger extinguisher, limited by the band clamps. I went with this size so it would clear my Hi-Lift jack.

Hi-Lift jack mount:
https://www.4crawler.com/4x4/ForSale/HiLiftMount.shtml

Killer Toy Tops:
https://killertoytops.com/

Some web archive links to soft top companies mentioned.
Kayline Mfg.:
https://web.archive.org/web/19990428193849/http://www.kaylinetops.com/
Specialty Top Co.:
https://web.archive.org/web/20010819040832/http://www.specialtytopco.com/
Can-Back:
https://web.archive.org/web/20010202070000/http://www.can-back.com/

#4Runner #softtop

Loading comments...