Doona Infant Car Seat Stroller - Review

https://amzn.to/48i1yg2 - Doona Infant Car Seat & Latch Base - Rear Facing, Car Seat to Stroller in Seconds - US Version, Nitro Black

Frequently Asked Questions:
Here are some frequently asked questions about the Doona Infant Car Seat Stroller:

Q: How long can I use the Doona Infant Car Seat Stroller?

A: You can use the Doona Infant Car Seat Stroller until your baby reaches either the weight limit of 35 lbs. or the height limit of 32 inches, whichever comes first2. You should also check the expiration date of the product, which is usually six years from the date of manufacture.

Q: How do I clean the Doona Infant Car Seat Stroller?
A: You can clean the Doona Infant Car Seat Stroller by following these steps2:

Remove the textiles from the car seat and wash them in cold water with mild detergent. Do not bleach, iron, or dry clean them. Air dry them or tumble dry them on low heat.

Wipe the plastic and metal parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents. Dry them with a soft cloth.
Lubricate the wheels and joints with silicone spray every three months or as needed. Do not use oil or WD-40.

Store the product in a cool and dry place, away from direct sunlight and heat sources.

Q: How do I install the Doona Infant Car Seat Stroller in my car?
A: You can install the Doona Infant Car Seat Stroller in your car by using either the LATCH system or the seat belt:

To use the LATCH system, attach the lower anchors of the base to the lower anchors of your vehicle seat. Make sure they are securely locked. Then, attach the top tether of the base to the top tether anchor of your vehicle seat. Make sure it is tightly adjusted. Finally, place the car seat on the base and make sure it clicks into place.

To use the seat belt, thread the lap belt through the belt guides on both sides of the base. Buckle the seat belt and lock it if necessary. Then, pull the shoulder belt all the way out and let it retract to tighten it. Finally, place the car seat on the base and make sure it clicks into place.

Q: How do I fold and unfold the Doona Infant Car Seat Stroller?
A: You can fold and unfold the Doona Infant Car Seat Stroller by following these steps:

To fold it, press the release button on the back of the car seat and pull up the handlebar until it locks in place. Then, press the release button on the handlebar and push it down until it locks in place. The wheels will automatically retract into the car seat.

To unfold it, press the release button on the handlebar and pull it up until it locks in place. Then, press the release button on the back of the car seat and pull down the handlebar until it locks in place. The wheels will automatically extend from the car seat.

#infant #donna #strollerbaby

DISCLOSURE: This channel is participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for this channel to earn advertising fees by advertising and linking to amazon.com I may earn a commission if you click through and make a purchase. Affiliate commissions help fund videos like this one.