Creality Ender 5 Plus Cool down Heat Bed quicker Part 1

Creality Ender 5 Plus Saves about 15 minutes of 3D printing time on every print for me...

Cool down Heat Bed. Part 1

Normally it can take about half an hour to cool the Build Plate down to a
temperature, 32°, I want before removing a part. This is a quarter of an hour quicker

2x 140mm x 20mm fans. Phanteks 140mm Case Fans PH-F140SP 12V 3-Pin Black/White. Connected in parallel

I redesign these fan brackets to have 3mm shorter edges so this is above the control box if the printer bed is lowered to max 400mm
I've also made them stronger