Premium Only Content

Slump test in field
The slump test is a common procedure used to measure the consistency or workability of fresh concrete in the field. It provides an indication of the concrete's ability to flow and be easily placed. Here is a step-by-step guide on how to perform a slump test in the field:
1. Equipment Preparation:
- Slump cone: A frustum-shaped metal mold with a height of 12 inches (30 cm), an upper diameter of 4 inches (10 cm), and a lower diameter of 8 inches (20 cm).
- Tamping rod: A steel rod, 5/8 inch (16 mm) in diameter and 24 inches (60 cm) long.
- Measuring tape: To measure the slump.
- Stopwatches: To record the time.
- Clean water: To moisten the slump cone before testing.
2. Cone Preparation:
- Moisten the inner surface of the slump cone.
- Place the slump cone on a flat, non-absorbent surface (such as a metal plate) and secure it.
3. Filling the Cone:
- Fill the cone in three equal layers with freshly mixed concrete.
- Each layer should be compacted with 25 strokes of the tamping rod, uniformly distributed over the cross-section.
4. Striking off the Excess:
- After the final layer, strike off the excess concrete from the top of the cone using a trowel or a straightedge.
- Make sure the top surface of the concrete is level with the top edge of the slump cone.
5. Cone Removal:
- Hold the cone firmly and lift it vertically in a steady, upward motion.
- Avoid twisting or disturbing the concrete inside the cone.
6. Slump Measurement:
- Immediately after removing the cone, place the measuring tape next to the slumped concrete.
- Measure the vertical distance between the top of the cone and the highest point of the slumped concrete. This is the slump value.
7. Recording the Results:
- Record the slump value in millimeters or inches.
- Repeat the test at least two more times with fresh samples and record the results.
8. Cleaning and Reusing the Equipment:
- Clean the slump cone and tamping rod thoroughly after each use.
- Ensure that the equipment is dry and free from any concrete residue before the next test.
Remember, the slump test provides a measure of the consistency of concrete, and different construction projects may require specific slump ranges. Always consult the relevant specifications or project requirements to determine the acceptable slump value for your particular application.
-
3:07:53
TimcastIRL
10 hours agoGOP To ABOLISH The TSA, Defund NPR & PBS, Already ENDED Education Department w/Sargon | Timcast IRL
250K175 -
1:43:06
Roseanne Barr
12 hours ago $23.31 earnedBit*h Better Have My Money W/ Michael Malice | The Roseanne Barr Podcast #92
80.8K59 -
3:07:55
IcyFPS
6 hours agoIcy Tackles Rebirth Island, again! Day 3 | Verdansk Soon | New META hunt? |
25.4K -
1:22:18
Man in America
13 hours agoTECHNOCRACY INC.: Sinister Links Between Musk, USA, and the British Crown?
70.5K45 -
2:40:30
SlingerGames
8 hours agoThursday Variety Stream!
34.1K5 -
3:05:53
SIMSIM GT
9 hours agoConvoy | Truck Simulator | TRIPLE 55INCH SETUP | GOPRO POV |
57.3K3 -
5:13:21
IronAngel26
10 hours ago $1.03 earnedfew games of fortnite
37.6K2 -
3:25:50
GamingwithMagus
8 hours agoOG Final Fantasy fan plays FF7 Rebirth part 27
41.1K4 -
14:40:56
charwinslow
20 hours agocurrently playing Assassin's Creed: Shadows, expert mode (& Nintendo Direct reaction n yoga)
31.9K -
4:18:51
hockeymancb77
10 hours agoNEW GAME ALERT!!! R.E.P.O. Stream! Lets get it!
38.8K2