Canister Purge Valve Replacement Ford Duratec 2.5L

In this video I go over the process of removing and installing the evaporative emissions canister purge valve on a Ford Duratec 2.5L. The vehicle featured in the video is a 2012 Ford Fusion equipped with a Duratec 2.5L. However, this particular Duratec 2.5L was used in other Ford models over the course of several years so the information found in this video is applicable to many other Ford models. Of course, do verify the information found in this video is applicable to whatever vehicle you are working on by using an appropriate repair manual for whatever vehicle you are working on.

Here is a link to the video showing how to diagnose a canister purge valve that is stuck open:
https://youtu.be/94DT7aR5YWk

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses, protective gloves and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbour's Auto Help, Barbour's Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour's Auto Help makes no guarantee that the information provided is totally complete, synchronized and accurate. Verify everything using an appropriate repair manual. Verify everything with your own research.