Cartoon T-28 Trojan RC Plane, Will It Fly?

Sometime ago there was a comment in one of my videos about request a cartoon style of fatty RC plane, but that time I was not interested for making that type of model, because I like scale model. Then about a month ago my friend brought his fatty RC plane on the field. When I looked at that plane I thought it's a challenge for me, so here it is I made a 1000mm cartoon RC plane, the model is T-28 Trojan. The model is entirely made from 3mm polyfoam or depron foam with 5mm foam for formers and spars. This cartoon plane can fly with sufficient power plant, after under powered on maiden flight I will test fly it again on this weekend with bigger prop and motor.

DONATE : paypal : juliusperdana@yahoo.co.id

SUBSCRIBE and Like to support this channel
#fatty #rcplane #fattyrcplane #cartoonrcplane #buildvideo

You can download the plans on the link below :
A4 Plans : https://paper-replika.com/RCplans/PR_Trojan_Cartoon_A4.pdf
A0 Plans : https://paper-replika.com/RCplans/PR_Trojan_Cartoon_A0.pdf
A3 Decal : https://paper-replika.com/RCplans/Decal_PR_Trojan_Cartoon_A3.pdf

Build instructions :
https://paper-replika.com/index.php/rc-foam-project/cartoon-t-28-trojan-rc-plane

DONATE via Paypal : Juliusperdana@yahoo.co.id

Playlist :
01:43 Plans Preparation
02:36 Wing
07:12 Fuselage
11:55 Install Wing to Fuselage
13:10 Stabilizer
14:21 Canopy
16:24 Covering
19:39 Paint and Decal
23:21 Center of Gravity
23:45 Landing Gear
24:13 Servos and Motor
26:54 Maiden Flight
32:44 Review (Next Project?)

Specs :
1. Wingspan 1000 mm
2. Flying weight : 995 grams/ 35.1 oz
3. Wing loading : 45.2 g/dm2 - 14.8 oz/sq.ft
4. Wing cube loading : 9.6
5. Wing Area : 22 dm2 / 341 sq.in
6. CG (see build instructions)

Electronics
- Turnigy 3536 650kv
- Propeller : 11x6x3
- ESC 50A
- Battery Lipo 3S 2200mah
- 4 plastic gear 9 gram servos https://amzn.to/2X5GdXH

Materials :
1. 3 mm Depron/ Polyfoam
2. 5 mm Depron/ Polyfoam
3. 7 mm + 3 mm Plywood
4. Hot glue, CA glue, PVA glue
5. 3 mm bicycle wheel spoke wire
6. 1.5 mm wire
7. white packing tape / wax paper
8. Small bamboo stick
9. 0.3 mm Mica plastic