Firing Order and Cylinder Identification 01 Ford Escape 3.0L

In this video I'll go over the firing order and cylinder identification for an 01 Ford Escape 3.0L.
Cylinder 1-3 are on the rear cylinder head starting with cylinder #1 closest to the accessory drive followed by cylinder #2 and then #3 as you move closer to the transmission. Cylinders 4-6 can be found on the front cylinder staring with cylinder #4 closest to the accessory drive followed by cylinder #5 and #6 as you move toward the transmission.

Knowing the cylinder identification and location is important especially when trying to diagnose a trouble code that is specific to a particular cylinder. Examples of cylinder specific codes are misfire codes, ignition coil codes, and injector codes.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guaranty that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guaranty that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual. You can do it. Do it right and do it safely.

Repair your vehicle at your own risk! Barbour's auto help does not guaranty a proper repair using these techniques.