3D Printer upgrade and Maintenance

3D Printer upgrade and Maintenance

## Upgrades for the Cocoon Create Touch. ##

Thumbwheel M3 --- 0,5mm per turn by DasMani01_MANIfaktur is licensed under the Creative Commons - Attribution - Non-Commercial license.
https://www.thingiverse.com/thing:2511499
This thumbwheel will make it easier to adjustment the Printbed.

SWD2 KIT Z-AXIS REAR MOUNT FOR WANHAO DUPLICATOR I3 PLUS / MONOPRICE MAKER SELECT PLUS by ShadowWeaver2067 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
https://www.thingiverse.com/thing:2414553
It stabilizes your z axis so that it is square and does not vibrate creating any ringing in prints or warping of the frame.

Wanhao Duplicator I3 Plus LCD enclosure by bosbessenbasje is licensed under the Creative Commons - Attribution - Non-Commercial license.
https://www.thingiverse.com/thing:2369322
This is an alternative for the Wanhao Di3+ LCD enclosure. The standard enclosure puts the LCD in a 90 degrees angle towards the table and that makes it hard to read. This enclosure will put the LCD in 60 degrees angle which improves readability at the cost of a slightly large space on the table.

Raspberry Pi 3 Model B case for mounting on Cocoon Create Touch / Wanhao Duplicator i3 Plus by mpfl is licensed under the Creative Commons - Attribution license.
https://www.thingiverse.com/thing:2781456
It is designed to mount the Pi what you could consider back-to-front, so that the USB and network cables hang down while keeping the power cable to the right - minimising chance of cables intefering with printing operation.

Magnetic Glass Bed Clips - Wanhao D6 / Monoprice Ultimate by brentd27 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
https://www.thingiverse.com/thing:2783609
These are highly customizable bed clips for the Wanhao Duplicator 6 / Monoprice Maker Ultimate. The bottom piece bolts to the bottom of the bed using 3mmx6mm machine screws. The original screws are not long enough, so you'll need longer ones. How long depends on how you customize the part, but the default settings work very well with 3mmx8mm screws with the original cardboard washer.

Fan Duct for Wanhao Duplicator i3 Plus by SidHiscocks is licensed under the Creative Commons - Attribution license.
http://www.thingiverse.com/thing:2271974
A Replacement of the original Front mounted fan Duct, Mounting the fan and duct to the rear giving better visual access to the nozzle and an improved cooling airflow to the part being printed.

BLTouch center mount Duplicator i3 Plus and Clones by indianagio on Thingiverse:
https://www.thingiverse.com/thing:3534775
Allows the BLTouch to be mounted in front of the nozzle closer to center.

The glass bed is an AnyCubic UltraBase, available from https://www.anycubic.com/collections/heated-bed-glass-plate

## Upgrades for the Creality CR10S5. ##
I do have an Unboxing video on this printer:
https://youtu.be/mGg-8kRSSgw

Creality CR10 Top winch support by kolergy is licensed under the Creative Commons - Attribution license.
http://www.thingiverse.com/thing:3226665

CR-10 BLTouch mount by shocksofmighty is licensed under the Creative Commons - Attribution license.
https://www.thingiverse.com/thing:2493610
I have two videos on this
Part 1: https://youtu.be/mxlqDamRVTA
Part 2: https://youtu.be/_3i6fO-9Pjo
Part 3: https://youtu.be/FjaKAeufO00

CR-10 S5 ZMatic Z axis alignment tool by carlitoscastellanos is licensed under the Creative Commons - Attribution - Non-Commercial license.
http://www.thingiverse.com/thing:3615519

I've also added a high power bed heater with a seperate box for the SSR that controls it.
Refer to the video on that upgrade for more info:
Part 1: https://youtu.be/_ytfw0PaBDQ
Part 2: https://youtu.be/gLRHL-dq6HI

Please Like, Subscribe and ring the notification bell to be alerted when the next video is released.
It also a form of support that costs you nothing, but does help the channel a lot.

Also please consider joining my VIP Patreon GoLucky and Louwrens Burger, as well as my Builder Patreon's Lmorales45 and White Wolf in supporting the channel on Patreon.
https://www.patreon.com/Cyber_One
Builder level Patreons get the videos 2 weeks before YouTube does,
VIP Patreons get the videos as they are created, from 2 weeks to 2 months before YouTube.

Alternatively you can help with a donation via paypal
https://www.paypal.com/donate/?hosted_button_id=T6NBDSZQXJ8RC

Maybe drop into the discord server for a chat :-)
https://discord.gg/WzrBUTkthQ

See you in the next video :-).