Heater Control Valve Cable Fix 05 Honda Odyssey 3.5L

6 years ago
14

In this video I'll show you how to prevent the heater control valve cable from popping off the heater control valve on an 05 Honda Odyssey 3.5L. The idea for this video was brought about by a question one of my viewers had about his A/C not blowing cold in the full cold setting. After doing a little digging I found that this is a common problem with some Odysseys, well at least the 05 to my knowledge. The fix is very simple and involves taking a little vacuum hose and applying it to the valve to keep the cable from popping off. This is probably one of the cheapest and easiest repairs anyone could make on a vehicle and it works. So, if you are having a problem with your A/C not blowing as cold in the full cold position or the heater not blowing hot in the full hot position then I'd advise you to take a look at this component and make sure the cable is connected. If it's not then follow the instructions in the video to repair.

The heater control valve is located on the fire wall just behind the engine by the way.

Here is a link showing how to replace a driver side blend door actuator.
https://youtu.be/IuekQMwy3sw

Here is a link to a video showing how to repair a drivers side blend door actuator.
https://youtu.be/jWcWUlbksco

Warning!! Please use extreme caution when working around your vehicle's cooling system. Yes, your heater control valve is a part of that system. Be sure the vehicle is totally cool before working on it and even then uses extreme caution because the cooling system could still be hot.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guaranty that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guaranty that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual. Follow the repair manual over this videos content. You can do it. Do it right and do it safely.

Loading comments...