05 Odyssey Belt Tensioner Assembly Replacement

In this video I'll show how to replace a serpentine belt tensioner assembly on an 05 Honda Odyssey 3.5L. Of coarse, I don't actually replace my tensioner assembly but the way I removed and replaced my tensioner assembly is the same process as replacing it. This is a relatively simple job but, it can be difficult as the the working area is very tight and the tensioner can seem to be difficult to move. The tensioner used is not a typical spring loaded tensioner. You'll need to take your time when moving the tensioner. Constant pressure is key. You'll notice that the tensioner will slowly move. Just take your time.

Note: The technique used at the end to install the belt where I used a jack handle to extend the trow of the ratchet is not the correct way to use a ratchet. Use this technique at your own risk. Damage to tools may occur. I would actually recommend using a serpentine belt tool for this job.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guaranty that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guaranty that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual. Follow the repair manual over this videos content. You can do it. Do it right and do it safely.