Spark Plug Replacement 07 Ford Edge 3.5L

4 years ago
25

In this video I go over the steps needed to replace the spark plugs on an 07 Ford Edge 3.5L. Other than removing the upper intake, which is shown in the video, the removal and installation of the spark plugs is very simple. Once the upper intake is removed the ignition coils will need to be removed. Once the ignition coils are removed then the spark plugs can be changed out. Once the spark plugs are replaced the rest is reverse procedure.

Torque specs and spark plug gap not provided. Please refer to your repair manual for this information.

Note: It is important to verify the spark plug gap, but in doing so use care not to damage the platinum tip. Usually, it's been my experience, the gap does require adjustment.

Special notes:
1: At the 4:34 mark I show an electrical connector that plugs into the back of the intake where the pcv hose goes into the intake. This connector like any other electrical connector on this vehicle has a locking tang or a release clip that must be released before the connector is pulled off.

2: Use a "spark plug socket" when removing and installing spark plugs. This socket has a special rubber insert that helps to prevent damage to the spark plugs. Also, you saw me wratcheting the spark plug out like I lost all coordination with my left hand. This was sloppy and you should use care to keep the spark plug socket and extension centered and supported on the spark plug when removing and installing spark plugs.

3: At the 6:22 mark I go over removing the brake booster hose but do not show it. The spring hose clamp can be released by squeezing the ears of the hose clamp to gether.

4: At the 11:08 mark I mention just using a brake clean soaked rag, be sure it's a lint free rag, to clean the mating surface before installing the upper intake. If you cannot achieve a perfectly clean surface I would suggest using a green scotch brite scouring pad to lightly, very lightly, scuff up the surface. Wipe clean with a brake clean soaked "lint free" rag after scuffing.
Here is a link to the scotch birte scouring pads I'm referring to: https://www.homedepot.com/p/Scotch-Brite-Heavy-Duty-Scour-Pad-6-Count-226-CC/202511521

5: At around the 15:45 mark and possibly in other parts of the video I refer to the "snorkel" as an air duct. I use the two terms interchangeably. I'm referring to the tube between the air filter housing and the throttle body.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Also, Barbour'sAutoHelp makes no guarantee that the information provided is totally complete, syncronized and accurate. Verify everything using an appropriate repair manual.

Repair your vehicle at your own risk! Barbour's auto help does not guarantee a proper repair using these techniques.

Loading comments...