Starter Replacement 2012-2018 Ford Focus 2.0L

2 years ago
15

In this video I go over the removal and installation procedure for a starter on a 2012-2018 Ford Focus 2.0L equipped with a DPS6 transmission.

As mentioned in the video the front end of the vehicle will have to be jacked up in order to gain access to the starter. The vehicle will have to be jacked up and properly supported. Instructions on how to do this properly were not given in this video. You will have to reference your repair manual for this information.

Warning ⚠️: Improperly lifting and supporting your vehicle can result in serious personal injury or death. You must reference a reputable repair manual for information on how to do this properly.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbour's Auto Help, Barbour's Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Also, Barbour's Auto Help makes no guarantee that the information provided is totally complete, synchronized and accurate. Verify everything using an appropriate repair manual.

Repair your vehicle at your own risk! Barbour's auto help does not guarantee a proper repair using these techniques. Further more I do not guarantee you will not damage your vehicle in the process of repairing it.

Loading comments...