Simple DIY Window Cornice

FastCap 16oz Glue Bot http://goo.gl/X5aNZ0

In this video I make a few window cornices to add a final touch to our great room remodel. I made these mostly out of scrap MDF and plywood that I had laying around but I had to buy the crown molding.

They are a simple three sided "Box" made out of MDF and assembled using wood glue and brad nails. I added some structural support by putting some 3/4" plywood as the hanger and back support. I also added some support between the back and the main face and this really stiffened up the hole assembly. Finished with a few coats primer and high gloss white paint, all applied using a sprayer. I hung them on the wall using 2 1/2" deck screws.

Subscribe for more DIY videos
http://bit.ly/2UJxXZW

Like us on Facebook
https://www.facebook.com/pages/DIYTyler/991123074248629

Follow us on Instagram
http://instagram.com/diytylerg