Murphy Bed with Cheap $20 Hardware

How to build a wooden Murphy wall bed with twenty dollar hardware. Save a TON of money by not buying an off the shelf Murphy bed kit for almost $300 and make your own with these simple boat seat swivel bearings.

The wall bed is made from 3/4" red oak PureBond plywood and the design is my own, which you can find plans for below, but is similar to other designs you will see. In total you will need 5 sheets of plywood to complete the bed. I skipped over the shelf build in the video as I would like to make a dedicated video for that later but you will need QTY 3 3/4" sheets and QTY 2 1/4" sheets of plywood to make the additional shelves on either side of the bed.

****Murphy Bed Downloadable PDF plans:
FULL SIZE
http://www.diytyler.com/shop/murphy-bed-full/
QUEEN SIZE
http://www.diytyler.com/shop/cheap-hardware-murphy-bed-queen/
👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕
Get your Shirt on!! http://bit.ly/DITylerMERCH
👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕👕
Swivel Brackets: http://amzn.to/2DMucrf ( If they are unavailable just know that these were 6.3x6.3". Center your brackets in the same position called out in the plans and you will be fine.)

Large Roll of Edge Banding:
http://amzn.to/2GxzcSm

Edge Banding Nippers:
http://amzn.to/2DNHQtY

Support this videos sponsors:
Purebond Plywood: http://purebondplywood.com/

Fuji Spray Systems: http://www.fujispray.com/

RIDGID Power Tools
https://www.ridgid.com/powertools/promotions/

Some Tools I Used (affiliate Links):
FastCap 16oz Glue Bot: http://goo.gl/X5aNZ0
EDC Belt Carry: http://goo.gl/XZnWRx
Mirka 6" ROS Sander: https://goo.gl/Dp85kf
Fuji Q5 5 Stage Turbine Spray System: https://goo.gl/ZAJF5g
Brayer Roller: http://goo.gl/bc5uIE
3M Respirator: https://goo.gl/ZexRQd
3M Respirator Filters: https://goo.gl/92Ejh0
Ear Plugs: https://goo.gl/R937J7
RIDGID Stealth Force Impact Driver: https://goo.gl/K2jKgG
RIDGID Cordless Nailer: https://goo.gl/hFfGQw
RIDGID 18V Cordless JobMax: https://goo.gl/pvEMmf
GF High Performance Top Coat: http://amzn.to/2E2iwE3