2017-2020 Hyundai Elantra Transmission-Coolant-Oil-Fumoto Valve-Tire Rotation-Jack Stands-Air Filter

My daughter purchased this car a few months ago and we do not know the maintenance history. It has 129,204 miles. In this video we will do the following:

Automatic Transmission Fluid (ATF) – Drain and Fill
Coolant (Anti-Freeze) – Drain and Fill
Oil and Oil Filter Change
Install Fumoto Valve for easier oil changes in the future
Identify jack stand location and comment on the lack of jack points for this vehicle
Tire Rotation

Update: Since posting this I have made a new video about how to jack up the vehicle and put on jack stands. You can find this video here:
https://rumble.com/v2ayyx9-2017-2020-hyundai-elantra-how-to-jack-up-and-put-on-jack-stands.html

UPDATE: Since publishing this video I found the replacement push pin clips for the underbody / skid plate: https://www.amazon.com/gp/product/B07FCNKV2D/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Remember, this is my first time performing all of this maintenance on this car. You are watching me learn on the video. If you need to skip ahead to an area of interest, this will help you out:

Highlights
1:28 Access and Remove Transmission Fluid Fill Bolt
This bolt is a difficult challenge, but I will show you how to win this challenge in this video.
21:09 Jack Up Vehicle
30:30 Remove Skid Plate
33:41 Transmission Drain Bolt
34:52 Skid Plate Summary
36:59 Drain Transmission Fluid
45:43 Add Transmission Fluid
51:18 Install air box
57:00 Check / Change engine air filter
1:01:20 Oil Change – Remove oil filter and drain oil
1:08:59 Fumoto Valve Install
1:15:07 Add Oil
1:17:39 Drain Coolant / Anti-Freeze
1:20:10 Tire Rotation
1:29:31 Install the Coolant drain plug
1:30:39 Install Skid Plate
1:34:20 Tighten Wheel Lug Nuts with Torque Wrench
1:35:03 Add Coolant

Helpful Notes for you:

2-quart pitcher used in video:
https://www.amazon.com/gp/product/B007IBJIBG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

TRANSMISSION
6-speed torque converter automatic
Capacity: 7 quarts
Drain and fill: 4 quarts
ATF SP4
Hyundai Fluid: SP4 or SP4-M
Valvoline MAX Life ATF full synthetic
Quantity: Approximately 4 quarts

Fill bolt on top
Drain bolt on bottom: 24mm, torque to 30 ft.-lb.
Crush Washer: 18 mm

OIL
5W-20, 4.2 Quarts, 17mm drain bolt
API SM & ILSAC GF-4 or above
Need oil filter wrench with 3/8” extension
Filter wrench 80 mm
https://www.amazon.com/gp/product/B00AKA6LW6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Fumoto Valve: F106SX, $26.21, 18 lb-ft of torque. 17 mm socket.
https://www.amazon.com/gp/product/B01HP5V092/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

Funnel used in video:
https://www.amazon.com/gp/product/B09X22LTJ5/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

OIL FILTER:
HYUNDAI Genuine 26300-35504 Amazon $11.78
26300-35505 may be updated version
https://www.amazon.com/gp/product/B077W5KV6B/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1

COOLANT
Drain and fill took about 5 quarts.
Phosphate-based ethylene glycol coolant for aluminum radiator.
ZEREX by Valvoline - Asian Vehicle
50/50 pre-mix: do not add water
Approximately $22/gallon
Lisle Spill-Free Funnel on Amazon:
https://www.amazon.com/gp/product/B00A6AS6LY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

TIRES
Wheel lug nut torque is 79-94 lb.-ft. That’s a wide range. We will choose 87 lb.-ft. near the middle of that range.
21 mm Socket for lug nuts
Torque: 87 lb.-ft.
Tire pressure: 36 psi
Spare tire: 60 psi
ROTATION
Back to Front on Same Side
Front to Back on Opposite Side

Oak & Iron Tire Inflator
https://www.amazon.com/OAK-IRON-Inflation-Compressor-Motorcycles/dp/B0B6JPPHKG/ref=sr_1_2?crid=UU0XBFFE1MHX&keywords=oak+and+iron+tire+inflator&qid=1676839526&s=automotive&sprefix=oak+and+iron+tire+inflator%2Cautomotive%2C88&sr=1-2

JACKS
I purchased all of my floor jacks at Harbor Freight.
https://www.harborfreight.com/automotive/jacks-jack-stands/floor-jacks.html

Jack Pads to Protect Pinch Welds
https://www.amazon.com/gp/product/B07X7MYGYF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1