Mind Blowing Ancient Technology - Preah Vihear Temple, Cambodia | Hindu Temple

1 year ago
141

𝗪𝗲 𝗻𝗲𝗲𝗱 𝘆𝗼𝘂𝗿 𝘀𝘂𝗽𝗽𝗼𝗿𝘁:
If you feel this work is important to be done in the current times, please help us out in producing more such content.
► PayPal :- https://paypal.me/hindutvawadi

★ Instagram :- https://instagram.com/praveenET
★ Twitter :- https://twitter.com/IamPraveenMohan
★ Email id :- phenomenaltravelvideos@gmail.com

Hey guys, today we are at the Preah Vihear temple in Cambodia and I found something very interesting and I cannot wait to show you this. Come... Now, this temple was built in 12th century, right? So this is about like 900 years old and you can see these big blocks of sandstone.
But apparently this is impossible technology, right because you see these huge blocks of stone. But look here. Look at the corner pieces.

These are for example two pieces of stone, but they're not. Look at the right angle. This is just one piece of stone or it may not even be a stone. It may be like a geopolymer technology
because look there's nothing in between no connection. Look here and then there. There are no connections. Again look... There is a spider here. So I may not be able to touch it. That's a huge spider, but look look at the corners. Do you see any lines at all in the corners? No, this is one stone apparently. What kind of technology is this?

How did they make these corners completely using single stone blocks? This needs extraordinary engineering. Now let's go to the other side to see what's going on. Look at this piece again, no connection on the corners, but look here... This was not even just like one piece. Goes all the way here and apparently bends, the stone is bending at an angle it's curving and then comes here and goes in a 45 degree angle goes all the way outside and I may have to go outside to show you where this rock ends.

Because this may not even be a rock. This is extraordinary technology. How did they build this? 900 years ago in Cambodia! Now... Let me show you the walls here. These huge blocks of walls.. Look at look at this block for example. Look at this block...This is going at the 90 degree, this is going at the 90 degree and this is fine. Look at here. There is a small bump. Look at this. Ok?
Now this was made to fit this block here. This means that all these blocks were created like a jigsaw puzzle so that none of them would be easy to pull out. OK, So this is again, look at here, right, going all the way.

Here look at this piece. There is a small bump here to make this fit. Now, none of the stones or maybe some of the stones are rectangular or trapezoid, right but none of these two-dimensional faces have four corners. They have more than four corners. This is extraordinary technology. Each one must weigh I don't know how many thousands of pounds and they were able to build this huge Jigsaw puzzle 900 years ago. Now how did they make this and traditionally archaeologists and historians will tell well they did it out of hard work.

They were using chisels and hammers and they were calculating using threads... Seems impossible to me to make these using chisels and hammers. But I have more evidence...
Let's go here. Do you think you can make these with chisels and hammers? Do you think you can make these, now, Look at them? They're so dilapidated right? So they're completely almost on the brink of destruction because of 900 years and this area Preah Vihear temple in Cambodia is in
the Cambodia Thailand border. War torn right continuous bombing because of various
you know political situations.

This Hindu temple dedicated to Lord Shiva has these columns. It's impossible to make them with chisels and hammers. Engineers agree with what I say. These can be created only
using lathe technology. They have to have a rotating mechanism a rotary mechanism to create this type of you know turns. Now, let me show you more... Here... Look at this column, right?
It's a little bit intact and it has a little bit more light.

So look at this column. Look at look at these pieces right? See, these were created using lathe technology. This proves that ancient builders were using machining technology. So, how did they manage to have such an extraordinary rock cutting technology about 900 years ago, right? So let's take a look at this rock, for example, It must be weighing more than a ton and this is one solid piece of rock sitting in Preah Vihear. Now, Preah Vihear temple is situated on top of a mountain which is more than 800 meters high from the ground level and according to locals all these rocks
were not cut from the mountain top.

#Cambodia #Hinduism #PraveenMohan

Loading comments...