Best tool to remove broken taps The Omega Drill OD SET1
Omega Drill Broken Tap Removal Drills
The Machinist's Choice for removing broken taps!
https://www.penntoolco.com/omega-drill-broken-tap-removal-drills/
Features:
Removes even the most stubborn Broken Taps.
Revolutionary carbide grade and advanced drill point geometry.
Works on spiral flute, straight flute and forming taps.
How to use:
Step 1:
Remove as much as practical of any uneven broken top surface of the tap, creating a reasonably flat surface for the Omegadrill to drill into.
Step 2:
Clamp the part securely. Use as large a diameter Omegadrill as possible to spot the broken tap. Drill at 1,200 to 2,500 RPM on a rigid and stable machine tool such as a machining center or knee mill.
Step 3:
Using the recommended size Omegadrill, drill down through the broken tap. Drill dry or use straight cutting oil – not coolant. Peck the drill and flush chips out frequently with an air blast. Best results are achieved with using light quill hand feed on a knee mill. When reaching the bottom of the broken tap, a slight vibration will be felt. It is best to stop drilling at this point, to minimize any risk of damage to the Omegadrill’s cutting edges.
Step 4:
Using either a scriber, or the picks and pin vise supplied with the Omegadrill set, remove the remnants of the broken tap flutes.
-
2:04:17
The Dilley Show
2 hours agoAre Pedos Trying to Stop Trump? w/Author Brenden Dilley 09/24/2024
6.17K8 -
49:18
Ben Shapiro
1 hour agoEp. 2054 - ZELENSKY Election INTERFERENCE?!
6.77K13 -
LIVE
Barstool Yak
5 hours agoThe Yak with Big Cat & Co. Presented by Rhoback | The Yak 9-24-24
355 watching -
LIVE
themidwesterner
55 minutes agoMike Rogers roundtable with Michigan farmers in Hudsonville
191 watching -
1:07:10
Russell Brand
4 hours ago$150,000 DEATH BOUNTY on Trump’s Head! DOJ COLLUSION? It’s Happening Again - SF459
79.8K191 -
1:57:36
The Charlie Kirk Show
2 hours agoThe Truth About Nebraska + The Soros Factor + "Trump Train" Triumph| Carr, Presler, Mesaros
41.6K39 -
36:30
Grant Stinchfield
2 hours agoGovernment Overreach or Saving the Children?
7.27K22 -
LIVE
TheAlecLaceShow
4 hours agoGuests: Rep Matt Gaetz & Rep. Michael Cloud | Bounty on Trump | Spending Bill | The Alec Lace Show
657 watching -
19:43
Neil McCoy-Ward
2 hours ago🚨 2 Major Superpowers Are Starting to COLLAPSE (And Could Bring EUROPE Down With Them...)
3.76K8 -
58:34
The Dan Bongino Show
5 hours agoThis Video Should Sink Kamala Harris (Ep 2335) - 09/24/2024
576K1.57K