[Assetto Corsa] Thurstmaster Ferrari SF1000 Telemetry Setup

1. Insure that your wheel is connected to the WIFI of your home network.
1a. If your wheel is not connected to your home network use your cell phone to connect to the IP provided by the wheel (the number should be 2X.X.XX.XXX, the Password will be 12345678)
1b. Click on the WIFI button that appears. It will take you to a sign in page for your home network. Enter in your details as necessary
1c. Your IP should now be similar to the one on your home network

2. Download the Telemetry Tool from Iko Rein on Race Department;
https://www.racedepartment.com/downloads/telemetry-tool-for-ac.37231/

3. Unzip the folder and place it in a folder where you will be able to find it and run it each time you play Assetto Corsa. Press "runWin_AC.bat"

4. When your Command Line opens up, ensure that all of the data provided there is the same as within the "AC Settings" found under the "Tools" drop-down menu. If there's any settings that need to be saved do so and restart the program.

5. Under the "Tool" drop-down menu click on "Network Settings"

6a. Click on UDP 1 & UDP 2 Enabled
6b. Ensure that the "Data Format" is "F1 2020 format"
6c. Set your frequency to high (do this only if your signal strength is 100%, if it is lower set accordingly)
6d. Enter in the IP address found on your wheel in both fields
6e. Enter in the Target IP Port found on your wheel in both fields
6f. Press "Save and close" and restart the program

7. Once you have opened up the program again run AC

If you did everything right your telemetry data should now be visible on your Sf1000 in a format similar to the F1 games. Unfortunately that is the only way to display this information so far.