Decoding Ancient Engineering Technology at Ramappa Temple, India | Hindu Temple |

Instagram :- https://instagram.com/praveenET
Twitter :- https://twitter.com/IamPraveenMohan
Email id :- phenomenaltravelvideos@gmail.com

This is my PayPal account if you would like to support me :- https://paypal.me/hindutvawadi

0:00 - Ceiling Design
1:04 - Strange X Marks
2:16 - Flexible Drilling Tools
2:42 - Baffling Statues
3:37 - Powerful Earthquake
4:05 - Miniature Model
4:38 - Empty slots in the Model
5:37 - Earthquake Proof Construction
7:22 - Extraordinary Drilling Technology
8:14 - Ancient Drill bits
9:40 - The Temple & The Prototype
10:44 - Gods with Drill bits
11:34 - Mysterious Bending Pillars
12:27 - Taper Joints
14:56 - An Underground Temple
15:57 - Conclusion

Hey guys, let's take a look at Ramappa Temple which was built at least 800 years ago, and by the end of this video, I think you would agree with me that ancient builders must have used a very advanced technology, similar to modern day technology.
Let's take a look at the ceiling in the center of this temple. In one square, we can see hundreds of Gods and if you zoom in and shine a flashlight, we can identify each and every one of them. Every corner tells a story. We are not going to examine the complex spiral designs which look like 3d cymatic patterns, we are not going to look at the protruding buds, and the centerpiece which is hanging out in the middle. We are only going to zoom in on the smaller figures which are less than 1 inch long. This temple was invaded by a commander called Malik Kafur, and he destroyed some of these figures.
But what's fascinating is that after he destroyed the figures, you can clearly see the X mark behind them. This means there is a gap between each small idol, and the surface at the back. The idols are very small, less than 1 inch long, so the gaps between the idol and the background must have been in millimeters. So, how did anyone create these X marks behind them within these small gaps? Forget about ancient machining technology. We cannot even carve these X marks today, because there is no room to put your hands inside and carve them? How can we make the X pattern on solid rock, with 2 millimeters space to carve, even with modern machinery? We would need flexible drilling and polishing tools similar to instruments used for advanced surgical operations like laparoscopy. Even if they were molded using rock melting technology, the ancient builders would still need very advanced precision tools to create the mold or the frame itself.
But there is more baffling evidence of ancient machining technology. This temple has a series of statues placed all around it, and at first look, you think they are modern day wax models molded to perfection. Archeologists confirm that these were made by ancient builders, but there are no tool marks, and no human errors made on these structures. Were they created using high tech engraving and polishing tools, similar to what we use today?
Now, what really baffles me about these statues is not how perfect they are, but how they are still standing in place, even after a powerful earthquake shook this temple. The earthquake dislodged many of the blocks in the temple, and I have already shown you how the ancient builders made this structure earthquake proof. But how did these statues, not fall down?

These are individual statues made of black basalt and are standing at an angle. How are they attached to these sandstone blocks behind them? Normally, it would be impossible to find out, but ancient builders were extremely clever, they knew that someday, someone would come looking for answers.

#Ancienttechnology #India #Disclosure