Metal Roof Stove Pipe Flashing

To be able to hear him turn on CC. Here's another example of cutting around penetrations in a metal roof. I know the audio is bad in places, but hang with us. You can see what he's doing, and I am including a transcript of what he's saying.

⏱️⏱️Chapters⏱️⏱️
00:00 Intro
00:22 We have a heater vent flashing
00:32 Pulled the rain collar up
01:22 Have to cut a sheet to cover the edge and lap over
02:12 Plumbing vent, rubber boots to put over them
02:42 How to measure for appliances
03:39 Cutting in the heater vent
03:52 Just pull the flashing down, cut v's in it where the ribs are
04:22 Seal the rivets on top of the heater vent, or they will think there's a leak
05:17 Silicone, not a big proponent because it will shrink and you'll have to go over it
05:51 Using a Ryobi battery powered caulking gun
06:10 Pull the rain collar down, and seal it
06:45 Probably have to go back over the silicone because it will shrink up
07:05 Learned to use tar
07:16 If you pulled lid off need to seal up rivets
07:28 Putting rubber cover on pipe
07:50 Mold it to the metal
09:20 Cutting metal over a hole
10:02 Follow us

🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf

➤➤I get a little for the channel-no charge for you if you use the links:
➤➤Shop Amazon https://amzn.to/3CxD1T4
➤➤Tool lists & recommended products🧰 https://straightarrowrepair.com/0lvf

➤➤Services We use
➤➤MORNINGFA·ME https://morningfa.me/invite/StraightArrowRepair
➤➤A2 Hosting http://www.a2hosting.com/refer/140244
➤➤Tubebuddy https://www.tubebuddy.com/StraightArrowRepair
➤➤Apsumo http://fbuy.me/v/philbridges
➤➤VidIQ: https://vidiq.com/straightarrowrepair

#metalroofing #metalroofvent #metalroofstovepipeflashing