Dry Box

Dry Box Filament Spool.

FDM printing filament tends to be hydroscopic, that is it absorbs moisture from the air over time.
The rate at which it absorbs moisture depends on the type of filament your using.

If left in the open air too long, you may need to dry it, is that case check out this video: https://youtu.be/CfarMHHnIUs

To help stop the filament from absorbing moisture in the first place, we need to keep it sealed in a box.
In this video we build a box with a spool roller and bulk head to let the filament out to accomplish this goal.

You will need:
1 x sealed food container large enough to hold a spool on filament with the opening, see the video.
mine was 250mm x 260mm x 115mm, 5.5 Litre. I picked it up from the local supermarket for just under AU$13:00.

1 x bulkhead parts by bygman10192: https://www.thingiverse.com/thing:2881250
2 x M3 x 16mm long machine screws
2 x M3 nuts
1/8 NPT push-to-connect tubing fitting for 4mm OD PTFE tube
A length of 4mm OD 2mm ID PTFE tubing.
Ideally long enough to reach from your dry box location to the extruder on your printer.

2 x Spool Holder created by me: https://www.dropbox.com/s/8k5lnojucbigvj7/Spool%20Holder%20Part%201.stl?dl=0
2 x Base reinforcement created by me: https://www.dropbox.com/s/tea10bjb2bq9747/Spool%20Holder%20Part%202.stl?dl=0
4 x 608 ball bearings
4 x M5 x 16mm Flathead screws
4 x M5 Nylock Nuts
1 x M8 threaded rod, approximately 125 mm long
1 x M8 Nylock Nut
2 x M8 nuts
2 x 8mm ID washers

Please Like, Subscribe and ring the notification bell to be alerted when the next video is released.
It also a form of support that costs you nothing, but does help the channel a lot.

Also please consider joining my VIP Patreon's GoLucky and Louwrens Burger and my Builder Patreon's Lmorales45 in supporting the channel on Patreon.
https://www.patreon.com/Cyber_One
Builder level Patreons get the videos 2 weeks before YouTube does,
VIP Patreons get the videos as they are created, from 2 weeks to 2 months before YouTube.

Alternatively you can help with a donation via paypal
https://www.paypal.com/donate/?hosted_button_id=T6NBDSZQXJ8RC

Maybe drop into the discord server for a chat :-)
https://discord.gg/WzrBUTkthQ

I have a number of Play-Lists that may also interest you:
Spot Micro build using MRL
https://youtube.com/playlist?list=PLgXTfFM40HqF6YqVjWtEtDC-ekbIkpkyE
Fred's modified Inmoov Robot Head created in the Fred's Head Series.
https://www.youtube.com/playlist?list=PLgXTfFM40HqEbnFfhaLPmLv_RS1ZRCilI
Fred's Head, a better stand. (This series)
https://youtube.com/playlist?list=PLgXTfFM40HqHV5EPKPULJDfbuXK1KUeeS
The Inmoov Walking Robot Series.
https://youtube.com/playlist?list=PLgXTfFM40HqEMwg9rJ078INRYWDCG66B3
Fred's Static Leg build and attach series, now finished.
https://youtube.com/playlist?list=PLgXTfFM40HqHhaHpmX4HQO9xJAz-pAsOm
The Creality CR10S5 3D Printer Series.
https://youtube.com/playlist?list=PLgXTfFM40HqH2fJ3Wsu2wX90h1_V4uI5n
The Cocoon Create Touch 3D Printer Series.
https://youtube.com/playlist?list=PLgXTfFM40HqHJlvRuSbhYUvdWBraW9tri
My Industrial videos.
https://youtube.com/playlist?list=PLgXTfFM40HqFNvDBGjblVrEkl3jrQKMDE
And finally some of my unboxing videos.
https://youtube.com/playlist?list=PLgXTfFM40HqFXHXRLBa9tsLhRQGcORZQO

See you in the next video :-).